Skip to content

Fabric Manager: Roles and Expectations

Ralph Castain edited this page Mar 1, 2020 · 1 revision

UNDER CONSTRUCTION

Please note that the role of the fabric manager within PMIx is a subject of current RFC development. Thus, the description on this page should be considered a "draft" at this time and is provided to help stimulate discussion.

Fabric Manager: Roles and Expectations

The fabric manager (FM) has several areas of interaction with PMIx, providing support for operations spanning the scheduler to the resource manager (RM), debuggers, and applications. Some of these represent new capabilities, while others are alternative (possibly more abstracted) methods for current interactions. In the PMIx reference library, support for each fabric type is provided via a fabric-specific plugin. Thus, the fabric vendors are free to provide whatever level of support they deem of value to their customers for the identified operations.

System Startup - Inventory

Schedulers generally require knowledge of the fabric topology as part of their scheduling procedure to support optimized communication between processes on different nodes. Current methods utilize files, read by the scheduler when it starts, to communicate this information. However, the format of the files tends to be both scheduler and fabric vendor specific, thereby making it more difficult to maintain as cluster configurations evolve (e.g., as a cluster reconfigures its network topology, or vendors offer new fabrics).

PMIx defines two modes for supporting inventory collection:

  • Fabric manager query. If the FM supports a global report of resources, then the PMIx server hosted by the scheduler can obtain the report via the PMIx_Query_nb API. This is the preferred method for obtaining inventory information as it supports dynamic requests - e.g., triggered by notification of a network change - and directly provides information on inter-switch connectivity
  • Rollup of information from individual daemons at boot. This procedure involves direct discovery of NICs on individual nodes, with the resulting information passed in a scalable manner back to the scheduler. To aid in implementation, PMIx provides an API to request that the PMIx server execute the discovery and report back the information to the host RM daemon. This requires that PMIx be configured with the necessary third-party libraries (e.g., HWLOC) to enable discovery. Given that switches are not likely to have RM daemons on them, this method also requires an alternative method (e.g., file) for providing information on the switch/connectivity map.

Regardless of which mechanism is used, the final inventory needs to include both a topology description of switch connectivity, and a description of the NICs on each node. The latter must include at least all fabric-related contact information (e.g., GID/LID) as well as the network plane to which the NIC is attached. Additional information on NIC capabilities (e.g., firmware version, memory size) is desirable, but not required.

Inventory collection is expected to be a rare event - at system startup and upon command from a system administrator. Inventory updates are expected to involve a smaller operation involving only the changed information. For example, replacement of a node would generate an event to notify the scheduler with an inventory update without invoking the global inventory operation.

Launch Support

Once an allocation has been made, the FM is involved in two steps of the application launch procedure. Each of these will occur at least once per application. Optimizations (e.g., caching of local NIC addressing info on compute nodes) are left to the discretion of the PMIx plugin implementor for each specific fabric.
Pre-Launch Configuration
Prior to starting the application, the RM may need to pass configuration information for the job to the FM (e.g., defining/setting QoS levels). The precise pre-launch settings will depend upon the abilities of the RM as well as the supported options of the FM. In order to coordinate this operation, the FM must support an ability for the RM to query (via the PMIx_Query_nb API) its levels of support (e.g., available QoS levels). This should include obtaining a list of configurable options, and any predefined set points.
"Instant-On" Support
Allocation of resources typically occurs when the scheduler is notified of job completion and just prior to initiation of the epilog portion of the prior job. However, many schedulers also utilize anticipatory scheduling to identify one or more jobs that will be run under different termination scenarios, and the need to aggregate resources for larger jobs often results in at least some portion of the allocation becoming available on a rolling basis. Thus, there frequently is some amount of time available for pre-conditioning of the allocation prior to start of a newly scheduled job.

RMs can take advantage of this time to pass both the allocation and job description to subsystems such as the fabric manager via the appropriate PMIx API, receiving back a blob'' containing all information each subsystem has determined will be required by its local resources within the allocation to support the described job. Values returned by the FM must be marked to identify which are to be given directly to the local resource (e.g., network driver) on each node, and which are to be passed to application processes as environmental variables that are recognized by the resource when initialized by that specific process. For example, some networks may preload'' the local network library with the location of all processes in that application, thus allowing the library to compute the required address information for any process, and/or include a security token to protect inter-process communications.

Once the initialization blob has been obtained, the RM passes it to its remote daemons on the allocated nodes as part of the launch message. Prior to spawning any local processes, each RM daemon utilizes a PMIx interface to deliver the configuration information to the local resources. This allows the resources to prepare any internal state tables for the job, an operation which may require elevated privileges and therefore cannot be performed by the application processes themselves. Upon completion of this "instant-on" initialization, processes have all information required to communicate with their peers - no further peer-to-peer exchange of information is required.

Accomplishing this procedure requires that the FM and associated network driver provide support for:

  • host address resolution. Historically, each application process would independently discover the locally available NICs and determine their addressing information (e.g., TCP addresses or GID/LID pairs) and ``broadcast'' that information to its peers. While it is sometimes possible to resolve NIC addresses given a hostname, failure to provide addressing information up front can lead to non-scalable hostname resolution demands on the SMS resolving agent, thereby necessitating the all-to-all broadcast. Removing this exchange is accomplished by having the fabric manager provide any required addressing information for all nodes in the allocation so the information can be included in the initial allocation setup message.
  • pre-launch assignment of rendezvous endpoints (e.g., a socket or queue pair index) to each process for initiating peer-to-peer communications. This does not preclude the dynamic assignment of additional endpoints (e.g., multiple queue pairs for enhanced bandwidth), but instead provides a means by which the two peers can initially contact each other to further establish their communication channel. Note that there is no restriction preventing the two peers from simply using the provided endpoint for regular communications if they so choose.
  • unexpected messages (i.e. messages received prior to process registration with the receiving NIC). Since a process is given all required information to communicate with any peer upon startup, it is possible that a process could immediately attempt to send a message to a remote peer that has not yet been started. Network libraries currently can lose messages and/or return an error on communications addressed to a process that is not yet known to the receiving library. Thus, current parallel programming libraries typically include an out-of-band barrier operation just prior to enabling communications to ensure that all processes have been instantiated and have registered with their local NICs. This requirement can be eliminated if sufficient retry logic and buffer space is included in the network library and/or NIC hardware. Avoiding aggressive retries may be desirable - e.g., the receiving NIC could return a specific error code indicating that the intended recipient is not known to the NIC, thus instructing the sending NIC to introduce some slight (possibly randomized) delay prior to retrying - to mitigate unnecessary network congestion during startup. Current measurements, however, indicate that the time difference between startup of processes on even an exascale machine would be in the tenth-of-a-second range, and non-benchmark applications typically do not immediately send to their peers - therefore, the value of taking extraordinary measures remains to be seen.

When a connection is to be formed (most libraries do that lazily nowadays), the library may be able to simply send the message (if the network driver is preloaded with connection information), or can get the remote port/plane assignment for the target proc by simply calling PMIx_Get to retrieve the info from the shared memory region and transferring it to the network driver via an appropriate interface.

Event Notification

PMIx provides a mechanism by which various system management subsystems can notify applications and other subsystems of events that might require their attention. This can include failures (broadly defined as anything that impacts the ability of that subsystem to perform as expected) or warnings of impending issues (e.g., a temperature excursion that could lead to shutdown of a resource). Events are generated on an asynchronous basis - i.e., the various subsystems are not expected to "poll" each other to obtain reports of events - and are transferred by PMIx to the RM for distribution to applications that have requested notification through the PMIx event registration interface. The FM is expected to provide notification of fabric-related events, including changes in routing (e.g., due to traffic or link failures) and node replacement.

As the FM is the source of these events, the impact on the FM is dictated solely by the frequency of events to report.

Application/Debugger Support

Applications, tools, and debuggers all would benefit from access to FM-based information. These are expected to be relatively infrequent, except perhaps during a dedicated debugging session when more frequent requests on network loading might be appropriate. Two areas of support have been identified (note that more will undoubtedly arise over time):
Traffic Reports
* Debuggers currently have limited, if any, access to network information. Given appropriate query support, a debugger could display an application layout from a network (as opposed to compute node) viewpoint, showing the user how the application is wired together across the fabric. In addition, traffic reports in support of debugging operations would aid in the identification of "hot spots" during execution.

In general, debugger queries should be infrequent except for the traffic reporting scenario. Reducing the burden on the FM in this latter use-case might require adoption of a distributed notification architecture - e.g., allowing the debugger to register for "traffic report" events, and enabling individual switches to generate them.

Application Optimization
* Application developers have indicated interest in an ability to query the current network topology of their application, request QoS changes or splitting their network resource allocation into multiple QoS "channels", etc. These will be infrequent.
Clone this wiki locally