The PiicoDev® Expansion Board for Raspberry Pi Pico is a great way to start experimenting with Raspberry Pi Pico/RP2040. Thanks to the onboard PiicoDev connector, you can quickly and easily connect to the PiicoDev family of sensor modules without soldering.
- Breaks out each Pico pin, with handy labels
- Take your project on the go with on-board LiPo battery charging.
- PiicoDev connector, compatible with Qwiic and STEMMA QT (3.3V only)
- Manufactured and supported in Australia by Core Electronics
Technical Details
- Dimensions: 51x51mm
- M2.5 mounting holes
- Charge current: approx 220mA / 440mA (when Fast Charge jumper is soldered)
- PiicoDev connector: I2C0 (SCL:Pin 9, SDA:Pin 8)
- PiicoDev connector pinout:
- 1 GND
- 2 3.3V
- 3 SDA
- 4 SCL
This project is open source - please review the LICENSE.md file for further licensing information.
If you have any technical questions, or concerns about licensing, please contact technical support on the Core Electronics forums.
"PiicoDev" is a registered trademark of Core Electronics Pty Ltd