Skip to content

USB Raw Gadget — a low-level interface for the Linux USB Gadget subsystem

Notifications You must be signed in to change notification settings

xairy/raw-gadget

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

86 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Raw Gadget

Raw Gadget is a Linux kernel module that implements a low-level interface for the Linux USB Gadget subsystem.

Raw Gadget can be used to emulate USB devices, both physical and virtual ones. Emulating physical devices requires a Linux-based board with a USB Device Controller (UDC), such as a Raspberry Pi. Emulating virtual devices requires no hardware and instead relies on the Dummy HCD/UDC module (such devices get connected to the kernel Raw Gadget is running on).

This repository contains instructions, examples, and tests for Raw Gadget. In addition, this repository hosts a copy of the Dummy HCD/UDC kernel module for out-of-tree building.

See the Fuzzing USB with Raw Gadget talk [video] for details about the Linux Host and Gadget USB subsystems and Raw Gadget.

Note: Do not use Raw Gadget in production for emulating USB devices with specific classes. Instead, use the Composite Framework or the legacy gadget driver modules.

Comparison to other interfaces

The Linux kernel provides a number of interfaces for the USB Gadget subsystem that allow emulating USB devices. Most notably there is the Composite Framework (including the FunctionFS-based composite function) and the legacy gadget drivers modules (including GadgetFS).

Most of the Gadset subsystem interfaces (with the exception of GadgetFS and the FunctionFS-based composite function) only allow emulating USB devices of specific classes. Compared to them, Raw Gadget allows emulating USB devices of arbitary classes.

GadgetFS and the FunctionFS-based composite function do allow emulating USB devices of arbitrary classes. However, these interfaces allow only a limited control over the responses to some USB requests, as they perform sanity checks on the responses provided from userspace. This limits their ability of emulating improper USB devices, which might be useful for fuzzing or exploitation. Compared to them, Raw Gadget has minimal checks on the provided responses.

Raw Gadget is thus the perfect choice for fuzzing and exploiting USB hosts or for software proxying of USB devices.

You can find more details about the difference between Raw Gadget and GadgetFS in the kernel documentation.

Limitations

While Raw Gadget does support emulating a wide range of USB device types, it has a set of known limitations:

  • Most notably, there is no support for USB 3 SuperSpeed device emulation (see #61);
  • Also see TODOs for a list of other more minor missing features.

These are not foundational limitations of the technology but rather just features missing from the implementation. They might addressed in the future.

Usage

Raw Gadget can be used on any Linux-based board that has a USB Device Controller (UDC) — a hardware component that allows the board to act as a USB peripheral device. Consult the documentation for your board on whether it has a UDC (often marketed as USB OTG) and how to enable it.

To set up Raw Gadget, you need to:

  1. Enable the UDC on your board;
  2. Find out the UDC device and driver names;
  3. Build and load the Raw Gadget module.

Once the setup is done, you can try running the provided examples.

See Raw Gadget on Raspberry Pi for end-to-end instructions on how to set up Raw Gadget on a Raspberry Pi board.

Building

There are two options of building Raw Gadget:

  • Rebuild the whole kernel with CONFIG_USB_RAW_GADGET enabled. This requires using a kernel version 5.7+, as Raw Gadget was merged into the mainline in 5.7 (or backporting Raw Gadget patches to an older kernel);

  • Build Raw Gadget as an out-of-tree kernel module without rebuilding the whole kernel; see raw_gadget (and dummy_hcd) for the instructions. Both modules should be compatible with kernel versions down to 4.14; see the table below.

USB Device Controllers

Raw Gadget requires the user to provide the UDC device and driver names. This allows using Raw Gadget with a particular UDC if a few of them are present on the system.

UDC device names can be found in /sys/class/udc/:

$ ls /sys/class/udc/
dummy_udc.0

The UDC driver name is usually present in /sys/class/udc/$UDC_DEVICE_NAME/uevent:

$ cat /sys/class/udc/dummy_udc.0/uevent
USB_UDC_NAME=dummy_udc

Below is a table of hardware with various UDCs that was tested with Raw Gadget.

Hardware Kernel Driver Device Works?
Any 5.3.0-45-generic dummy_udc dummy_udc.0 Yes
Raspberry Pi Zero 4.14.97+ 20980000.usb 20980000.usb (dwc2) Yes
Raspberry Pi 4 5.10.63-v7l+ fe980000.usb fe980000.usb (dwc2) Yes
Raspberry Pi 5 6.8.0-1007-raspi 1000480000.usb 1000480000.usb (dwc2) Likely
USB Armory Mk II 5.4.87-0 2184000.usb ci_hdrc.0 Yes
Orange Pi PC 5.10.60 musb-hdrc musb-hdrc.4.auto Yes
Orange Pi PC 2 5.10.60 musb-hdrc musb-hdrc.4.auto Yes
Khadas VIM1 5.10.60-meson64 c9100000.usb c9100000.usb Yes
ThinkPad X1 Carbon Gen 6 5.15.0-107-generic dwc3-gadget dwc3.1.auto Yes
NXP i.MX8MP 6.6.23 dwc3-gadget 38100000.usb Yes
BeagleBone Black 4.19.94-ti-r42 musb-hdrc musb-hdrc.0 Probably
BeagleBone AI 4.14.108-ti-r131 dwc3-gadget 48890000.usb Probably
EC3380-AB 5.3.0-45-generic net2280 0000:04:00.0 (e.g.) Partially,
net2280 buggy
Odroid C2 3.14.79-116 dwc_otg_pcd dwc2_a No, kernel too old

"Works" in the table above means that the setup passed the provided tests. However, note that those only cover a subset of functionality.

syzkaller integration

Raw Gadget powers the syzkaller's ability to fuzz the Linux kernel USB stack.

See Running syzkaller USB reproducers for instructions on running syzkaller USB reproducers on a Linux-based board plugged into a physical USB host.

You also set up syzkaller in the isolated mode to fuzz physical USB hosts with the help of Raw Gadget. Instructions for this are not provided.

Facedancer backend

There's a prototype of a Facedancer backend based on Raw Gadget.

This backend relies on a few out-of-tree Raw Gadget patches present in the dev branch. Once the backend is thoroughly tested, these patches will be submitted to the mainline.

Raw Gadget–based backend accepts a few parameters through environment variables:

Parameter Description Default value
RG_UDC_DRIVER UDC driver name dummy_udc
RG_UDC_DEVICE UDC device name dummy_udc.0
RG_USB_SPEED USB device speed 3 (High Speed)

Example of using Facedancer with Raw Gadget to emulate a USB keyboard on a Raspberry Pi 4:

export BACKEND=rawgadget
export RG_UDC_DRIVER=fe980000.usb
export RG_UDC_DEVICE=fe980000.usb
./legacy-applets/facedancer-keyboard.py

Note: Some Facedancer examples might fail if a wrong USB speed is specified. Failures happen either with EINVAL in USB_RAW_IOCTL_EP_ENABLE, with ESHUTDOWN in USB_RAW_IOCTL_EP_READ/WRITE, or can be completely random. For example, with Dummy UDC, examples/ftdi-echo.py requires RG_USB_SPEED=2 and legacy-applets/facedancer-ftdi.py requires RG_USB_SPEED=3. In turn, legacy-applets/facedancer-umass.py requires RG_USB_SPEED=2.

Note: This backend is still a prototype. Outstanding tasks:

  1. Rebase the backend onto Facedancer 3.0 release;
  2. Make sure that all required backend callbacks are implemented. For example, read_from_endpoint should probably be implemented;
  3. Provide a common Python wrapper for Raw Gadget ioctls, and use it in the backend;
  4. Finalize and submit out-of-tree Raw Gadget patches to the mainline.

Note: Facedancer assumes that every backend supports non-blocking I/O, which is not the case for Raw Gadget. To work around this limitation, the backend prototype relies on timeouts. The proper solution to this issue would be to add non-blocking I/O support to Raw Gadget.

Troubleshooting

As a generic guidance to troubleshooting Raw Gadget errors:

  1. Consider switching to the dev branch.

    This branch might contain fixes for some known issues;

  2. Enable debug output for Raw Gadget (and Dummy HCD/UDC if you're using it).

    To do this, add the following line to the very beginning of raw_gadget/raw_gadget.c:

    #define DEBUG

    Then, rebuild and reinsert the Raw Gadget module;

  3. Check the kernel log via dmesg to find out what is failing.

No such device

USB_RAW_IOCTL_RUN returns ENODEV, error code 19:

ioctl(USB_RAW_IOCTL_RUN): No such device

This error means that bad UDC driver/device names were provided. Make sure that the UDC driver module is loaded. Also see USB Device Controllers about UDC names.

Cannot send after transport endpoint shutdown

Endpoint operations return ESHUTDOWN, error code 108:

ioctl(USB_RAW_IOCTL_EP0_WRITE): Cannot send after transport endpoint shutdown

This error means that the emulated USB device tried to perform a read or write operation on a disabled endpoint. This error can happen due to a variety of reasons, but it is commonly observed when the host decides to reset the device during its operation, following which the UDC driver disables all enabled endpoints.

Often, a reset happens when the device emulation code does something wrong. For example, provides a bad USB descriptor that is either malformed or inconsistent with the emulated device speed or other parameters. As a result, either the UDC driver or the host resets or disconnects the device.

However, a reset can happen during a normal device operation. For example, the host might decide to reconfigure the device and thus will reset it. The UDC driver will then deactivate all endpoints and any attempt to perform an endpoint operation will fail with ESHUTDOWN. When this happens, Raw Gadget will issue a USB_RAW_EVENT_RESET event (or USB_RAW_EVENT_DISCONNECT for dwc2). The device emulation code needs to gracefully handle ESHUTDOWN, disable all Raw Gadget endpoints when hanlding the USB_RAW_EVENT_RESET event, restart enumeration, and reenable the endpoints when handling a new SET_CONFIGURATION request. See the keyboard example for a reference implementation.

Projects based on Raw Gadget

Fuzzing-related:

Proxies:

Emulators:

Other:

  • blegas78/chaos — MitM tool running on Raspberry Pi that allows Twitch chat to mess around with the inputs from a Dualshock 4 Generation 2 controller.

TODO

License

The parts of code in this repository that are derived from the Linux kernel are covered by GPL-2.0. Everything else is covered by Apache-2.0. SPDX-License-Identifier marks the used license in each file.

About

USB Raw Gadget — a low-level interface for the Linux USB Gadget subsystem

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •