Skip to content

Documentation 2.1.0

Maciej Laskowski edited this page Dec 4, 2017 · 2 revisions

AET

Getting Started

What is AET

AET (Automated Exploratory Testing) is a testing tool which aids front end client side layout regression testing of websites and portfolios. It allows to ensure that a change in one part of the software did not introduce any defects in other parts of application. AET is a flexible application that can be adapted and tailored to the requirements of a given project.

Why AET

The aim of AET is to ensure a better software quality. This goal is achieved by a couple of factors.

AET allows to create and maintain automated tests as well as to analyze their results easily and quickly. Test automation has a strong influence on test coverage because AET is able to cover a bigger part of software when compared to manual testing (it saves time needed for manual regression). Automation also helps to eliminate human errors. Finally, AET supports software continuous integration.

AET in 10 Minutes

This is a quick guide showing how to setup the AET environment and run a sample test.

Prerequisites

Before start make sure that you have enough memory on your machine (8 GB is minimum, 16 GB is recommended though).

You need to download and install the following software:

Set Up Vagrant

Open a command prompt as the administrator and execute the following commands:

  • vagrant plugin install vagrant-omnibus
  • vagrant plugin install vagrant-berkshelf
  • vagrant plugin install vagrant-hostmanager

Navigate to the vagrant module directory. Run berks install and then vagrant up to start the virtual machine. This process may take a few minutes.

Set Up the Test

Create the file named suite.xml with the following content:

<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="company" project="project">
    <test name="first-test" useProxy="rest">
        <collect>
            <open/>
            <resolution width="800" height="600" />
            <sleep duration="1500"/>
            <screen/>
            <source/>
            <status-codes/>
            <js-errors/>
        </collect>
        <compare xmlns="http://www.cognifide.com/aet/compare/">
            <screen comparator="layout"/>
            <source comparator="w3c-html5"/>
            <status-codes filterRange="400,600"/>
            <js-errors>
                <js-errors-filter source="http://w.iplsc.com/external/jquery/jquery-1.8.3.js" line="2" />
            </js-errors>
        </compare>
        <urls>
            <url href="https://en.wikipedia.org/wiki/Main_Page"/>
        </urls>
    </test>
</suite>

Then create another file named pom.xml with the following content:

<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
    <modelVersion>4.0.0</modelVersion>

    <groupId>test-group</groupId>
    <artifactId>test-project</artifactId>
    <version>1.0.0</version>
    <packaging>pom</packaging>

    <name>Test project</name>
    <url>http://www.example.com</url>

    <properties>
        <aet.version>2.0.0</aet.version>
        <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
    </properties>

    <build>
        <plugins>
            <plugin>
                <groupId>com.cognifide.aet</groupId>
                <artifactId>aet-maven-plugin</artifactId>
                <version>${aet.version}</version>
            </plugin>
        </plugins>
    </build>
</project>

It does not need to be in the same directory as the suite.xml file.

Run the Test

Once you have created both suite.xml and pom.xml files open a command prompt in the directory which contains the pom.xml file and execute the following command:

mvn aet:run -DtestSuite=full/path/to/suite.xml

Remember to provide the path to your suite.xml file.

Check Results

Once the test run finishes there should be the target directory created inside the directory containing the pom.xml file. Inside the target directory you should find the redirect.html file. Open this file and the test report will show up in your web browser.

Congratulations! You have successfully created and run your first AET test.

Build and Upload the Application

You need JDK 8 and Maven 3.3.1 or newer to build the AET application. To build and upload the application use the following command in the application root:

mvn clean install -P upload

Upload Vagrant Prequisities:

In order to be able to deploy bundles to the Karaf instance define the location of the vagrant vm in your setting.xml file ($USER_HOME/m2):

<server>
  <id>aet-vagrant-instance</id>
  <username>developer</username>
  <password>developer</password>
  <configuration>
    <sshExecutable>plink</sshExecutable>
    <scpExecutable>pscp</scpExecutable>
  </configuration>
</server>

Dictionary

Active MQ
a JMS (Java Message Service) Server which is a basic communication channel between AET System components.

AET
an open source testing tool developed by Cognifide.

AET Core
a set of system modules that are crucial for the whole system to work. The AET system will not work properly without all core modules configured and running properly.

AET Jobs
implementations of jobs that can perform a particular task (e.g. collect screenshots, compare sources, validate a page against W3C HTML5).

AET Maven Plugin
a default client application for the AET system that is used to trigger the execution of the Test Suite.

Amazon Web Services
cloud computing services where the AET environment can be deployed to.

Apache Karaf
see Karaf.

Artifact
usually used in the context of a small piece of data, the result of some operation (e.g. a collected screenshot or a list of W3C HTML5 validation errors).

AWS
see Amazon Web Services.

Baseline
a snapshot of the page, stored in a file, against which future versions will be compared. It is called also a Pattern.

Browsermob
a proxy server used by AET to collect some kinds of data from tested pages.

Cleaner
a module responsible for removing old and unused artifacts from the database.

Collector
a module responsible for gathering data necessary for its further processing (e.g. validation, comparison).

Collection
the first phase of the AET service during which all specified data is collected (e.g. screenshots, page source, js errors). Once they are collected successfully, all collection results are saved in the database.

Comparator
a module responsible for comparing data currently collected to its existing pattern or validating it against a set of defined rules.

Comparison
the second phase of the AET service that performs the operation on the data. In some cases the data collected during the first phase is compared to patterns, in others special validation is performed (e.g. W3C HTML5). The second phase starts before the collection finishes - just the moment when required artifacts are collected and become ready to be compared (e.g. to compare two screenshots system does not have to wait until the source of a page is collected).

Cookie Collector
a collector responsible for collecting cookies.

Cookie Comparator
a comparator responsible for processing collected cookies.

Cookie Modifier
a modifier that allows to modify cookies for a given page, i.e. to add or remove cookies.

Data Filter
a module responsible for filtering the collected data before performing comparison e.g. filtering uninteresting js errors before the js errors check takes place.

Data Storage
a database abstraction layer which contains versioned data (data grid).

Extract Element Modifier
a modifier that allows to extract an element from the html source (collected by the Screen Collector) by providing the id attribute or the class attribute.

Feature
a part of the AET system which covers a full testing case e.g. layout - this feature consists of the Screen Collector, the screen comparator and the layout reporter module.

Firefox
a browser the AET tool makes use of, currently the version that is used is 38.6.0 ESR (en-US).

Header Modifier
a modifier responsible for adding additional headers to a page.

Hide Modifiers
a modifier responsible for hiding an element on a page that is unnecessary for a given test.

Html-report
a basic report in a form of a HTML file.

Java
a programming language that is used to develop the AET tool.

Java Development Kit
see JDK.

Java Management Extensions
see JMX.

Java Message Service
see JMS.

JavaScript
see JS.

JDK
the Java Development Kit is a program development environment for developing Java applications.

Jenkins
a continuous Integration (CI) server which is used as the user interface wrapper for the AET Maven Plugin.

Jetty
a simple Http Server, used as a container for web applications.

JMS
an acronym for the Java Message Service, simple message standard that allows application components to communicate with one another.

JMX
Java Management Extensions (JMX) is a technology that is used to manage and monitor advanced interfaces of Java applications. In the AET tool it is used to manage ActiveMQ.

JS
a dynamic programming language.

JS Error
a JavaScript error that occurs in a script during its execution.

JS Errors Collector
a collector responsible for collecting JavaScript errors occurring on a given page.

JS Errors Comparator
a comparator responsible for processing the collected JavaScript error resource.

JS Errors Filter
a filter that filters the results returned by the JS Errors Collector. It removes matched JavaScript errors from reports.

JUnit
a simple framework allowing to develop repeatable tests. It is an instance of the xUnit architecture for unit testing frameworks. More information about it can be found at: http://junit.org/.

Karaf
in fact Apache Karaf is an OSGi container that provides a basic configuration for existing OSGi implementations (e.g. Apache Felix).

Layout Comparator
a comparator responsible for comparing a collected screenshot of page to its pattern.

Login Modifier
a modifier that allows to log in into the application and access secured sites.

Maven
a software project management and comprehension tool. It used as a base for the AET Maven Plugin.

Modifier
a module responsible for converting the target before the data collection process is performed e.g. modifying a requested header, adding a new cookie, hiding a visible element.

MongoDB
an open-source cross-platform document-oriented database that the AET tool makes use of for data storage and management. MongoDB is developed by MongoDB Inc.

Open
A module that is a special operand for the Collect Phase.

OSGi
a modular system and services platform for Java. It is used as an application environment for AET Java components.

Pattern
a sample model of data. Collection results are compared to their patterns to discover potential differences.

pom.xml
a Maven tool configuration file that contains information about the project and configuration details used by Maven to build the project.

Rebasing
an operation changing the existing pattern to the current result.

Regression testing
this is a type of software testing that seeks to uncover new software bugs, or regressions, in existing functional and non-functional areas of a system. It is especially useful after changes such as enhancements, patches or configuration changes, have been made.

Remove Lines Data Modifier
a modifier that allows to remove lines from the source (data or pattern) that a given page is compared to.

Remove Nodes Data Modifier
a modifier that allows to delete some node(s) from a html tree. Node(s) are defined by the xpath selector.

Report (Web application)
a web application for viewing / browsing AET test results. (At the moment the Google Chrome browser is supported).

Representational State Transfer API
see Rest API.

Resolution Modifier
a modifier responsible for changing the size of the browser screen.

Resource type
a unique name for the resource produced by the collector and consumed by the comparator.

Rest API
a Representational State Transfer API for the data stored in the AET Database. It enables the user to browse the data and artifacts stored after a run of the Test Suite was completed.

Runner
a unit responsible for the communication with the client and dispatching processing among workers.

SCM repository
a data structure storing metadata for a set of files that is managed by a source control management (SCM) system responsible for managing changes in files. The most popular examples of SCM systems are Git (http://git-scm.com/) and SVN (https://subversion.apache.org/).

Screen Collector
a collector responsible for collecting a screenshot of the page under a given URL.

Selenium
a portable software testing framework for web applications. At the moment AET makes use of Selenium 2.50.1.

Selenium Driver
a test tool that allows to perform specific actions in a browser environment (e.g. take a screenshot of a page).

Sleep Modifier
a modifier responsible for ceasing the execution of a given test temporarily. It causes a current thread to sleep.

Source Collector
a collector responsible for collecting the source of a page under a given URL. Unlike other collectors the Source Collector does not use Web Driver. It connects directly to a web server.

Source Comparator
a comparator responsible for comparing a collected page source to its pattern.

Status Code
a response code for the resource request. For a detailed list of codes please refer to the Hypertext Transfer Protocol documentation at: http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html.

Status Codes Collector
a collector responsible for collecting status codes for links to resources on a page under a given URL.

Status Codes Comparator
a comparator responsible for processing collected Status Codes.

Step
a single operation performed on the url defined in the <collect> phase of the suite.

Test
a definition of logical set of Test Cases performed on a set of URLs.

Test Suite
a set of Tests (at least one) finished with the Report.

Test Case
a single URL Test against a feature, e.g. a W3C HTML page test, a screenshot for the resolution 800x600 test.

Thresholds
a feature allowing to declare a Jenkins build as ‘success’, ‘unstable’ or ‘failed’ depending on the number of Tests that failed or were skipped.

Wait For Page Loaded Modifier
a modifier that waits until a page is loaded or a fixed amount of time is up.

Web Console
the OSGi console installed on Apache Karaf. By default it is accessible via a browser: http://localhost:8181/system/console/configMgr. The default user/password are: karaf/karaf.

Worker
a single processing unit that can perform a defined amount of tasks (e.g. collect a screenshot, compare a source).

W3C HTML5 Comparator
a comparator responsible for validating a collected page source against W3C HTML5 standards.

xunit-report
a Report that visualizes risks on the Jenkins job board and that contains information about the number of performed tests and the number of failures (potential threats).

How To Use

Environment Setup

There are two ways to setup the AET environment: basic and advanced.

basic

The basic setup makes use of Vagrant to create a single virtual machine running Linux OS (currently CentOS 6.7). This virtual machine contains all AET services as well as all the software required to run them. In this configuration, tests are using a Linux version of the Firefox web browser. Please note that there are differences in web page rendering between Linux and Windows versions of Firefox and if you want to use its Windows version then you must refer to the advanced setup.

See Basic Setup for more details.

The diagram below shows the basic AET setup.

aet-setup-basic

advanced

The advanced setup on the other hand makes use of two machines - one running a Linux OS and the other one running Windows, both complementary to each other. The linux machine hosts services such as MongoDB and ActiveMQ whereas the Windows machine hosts Karaf, the Browsermob proxy and Firefox. In this configuration tests run on a Windows version of the Firefox web browser.

See Linux and Windows Setup for more details.

The diagram below shows the advanced AET setup.

aet-setup-advanced

Basic Setup

This setup makes use of the Vagrant module, a pseudo-cookbook which is responsible for local environment provisioning using Vagrant (powered by Chef + Berkshelf under the hood).

Overview

Currently a virtual machine with the following services is created:

  • Karaf
  • Apache
  • Tomcat
  • ActiveMQ
  • MongoDb
  • Brosermob
  • Firefox
  • X environment

AET Services

All services run using default ports. For communication please use the following IP address:

  • 192.168.123.100

General Prerequisites

By default the Vagrant virtual machine needs 3 GB of RAM and 2 vCPUs, so please make sure that you have enough memory on your machine (8 GB is minimum, 16 GB is recommended though).

Installation

As the administrator execute the following commands:

  • vagrant plugin install vagrant-omnibus
  • vagrant plugin install vagrant-berkshelf
  • vagrant plugin install vagrant-hostmanager

Whenever you'd like to keep all Vagrant related data and virtual machine disks in non-standard directories please:

  • set the VAGRANT_HOME variable for the location (by default it is set to $HOME/vagrant.d).
  • update VirtualBox settings (File -> Preferences -> General) to move all disks to other directory.

Starting Virtual Machine

Once you set all the thigs described above just execute:

berks update && vagrant destroy -f && vagrant up

First Run

All the commands need to be executed when you're inside a directory that contains Vagrantfile.

Next you will need to execute:

  • berks install - downloads Chef dependencies from external sources. It acts as mvn clean install, but for Chef cookbooks.
  • vagrant up - creates a new virtual machine (the .box file will be downloaded during the first run), runs Chef inside it, sets domains and port forwarding up.

Updates

Whenever a new version is released please execute the following:

  • git pull to get the latest version of Vagrantfile.
  • berks update to update Chef dependencies.
  • vagrant provision to re-run Chef on the virtual machine.

SSH Access

To access the virtual machine via SSH please execute vagrant ssh from the same directory that contains Vagrantfile. After that please type sudo -i and press ENTER to switch to root.

If you prefer to use PuTTY, mRemote or any other connection manager, please log in as the user vagrant with the password vagrant on localhost with the port 2222. Keep in mind that the port may be different if you have more than one Vagrant machine running at the same time. You can check the current assignment by executing the vagrant ssh-config command from the directory that contains your Vagrantfile.

Useful Vagrant Commands

  • vagrant reload restarts the Vagrant machine and re-applies settings defined in Vagrantfile. It's useful whenever you've changed the port forwarding or synced folder configuration.
  • vagrant destroy -f deletes the entire virtual machine.
  • vagrant reload --provision restarts the virtual machine and re-runs Chef afterwards.
  • vagrant suspend suspends the virtual machine that is currently running.
  • vagrant resume resumes the suspended virtual machine.
  • vagrant status shows the status of the virtual machine described in Vagrantfile.
  • vagrant halt halts/turns off the virtual machine.

Port Forwarding

The local port is a port exposed on your machine. You can access services via localhost:<PORT>.

The VM port refers to the port assigned inside the Vagrant virtual machine.

Port forwarding rules can be easily changed in Vagrantfile.

Local port VM port Description
8181 8181 Karaf

Known Issues

  • When getting the following error during application deployment to the local Vagrant:
    What went wrong: Execution failed for task ':deployDevClearCache'. > java.net.ConnectException: Connection timed out: connect
    
    run the ifup eth1 command on Vagrant using ssh.

Advanced Setup

Operating Systems setup

aet-setup-advanced

This section describes advanced setup of AET using Linux and Windows. The main advantage of this approach is ability to run tests on Firefox on Windows, which is more reliable than Firefox on Linux.

Please note that full list of required tools and its versions can be found in System Components section.

Linux Setup
  1. Turn off Firewall. This may be achieved differently on various linux distribution, for example on CentOS selinux and iptables should be disabled.
  2. Install MongoDB in version 3.2.3
  3. Install JDK from Oracle (1.7)
  4. Install ActiveMQ in version 5.13.1
    • Enable JMX for ActiveMQ with connector under port 11199
    • Switch Persistence for ActiveMQ
    • Enable cleaning unused topic for ActiveMQ
  5. Install Apache Server
    • Configure site for the following path: /opt/aet/apache/aet_reports/current
Windows Setup
  1. Install Java 7 JDK and update JAVA_HOME environment variable.
  2. Change default console resolution - install VNC server (e.g. http://www.tightvnc.com/), connect by VNC client to console and change resolution (min. 1024x768).
  3. Turn off Windows Firewall (both, private and public network location settings).
  4. Install Karaf in version 2.3.9
  5. Install Browsermob in version 2.0.0
  6. Install Firefox 38.6.0 ESR
    • Choose 'Custom Install' and do not install maintenance service - this is very important
    • Turn off automatic updates
  7. Check the following connections between Windows and Linux:
    • MongoDB: telnet ${LINUX_MACHINE_PRIVATE_IP} 27017
    • ActiveMQ: telnet ${LINUX_MACHINE_PRIVATE_IP} 61616
    • ActiveMQ's JMX: jconsole.exe ${LINUX_MACHINE_PRIVATE_IP}:11199
AET deployment

Here's a description where to deploy all the artifacts.

Artifact Environment Default folder
bundles.zip Windows - Karaf /deploy
features.zip Windows - Karaf /deploy
configs.zip Windows - Karaf /etc
report.zip Linux - Apache /opt/aet/apache/aet_reports/current

OSGi Configuration

This section describes how to configure the AET OSGi services so that they could connect to the appropriate system components.

The services are configured through the Karaf Web Console which is hosted on Windows machine. Assuming that this machine's IP address is 192.168.0.2, the Karaf console is available under following address: http://192.168.0.2:8181/system/console/configMgr.

Assumptions

The example configuration assumes the following:

  • The IP address of Linux machine is 192.168.0.1
  • The IP address of Windows machine is 192.168.0.2
  • The Apache HTTP server serves Reports application under domain http:\\aet-report
Connections configuration

The diagram below shows which AET OSGi service should connect to which system component on the appropriate machine. On the diagram the arrows point from the AET services to the system components. The notes on the arrows contain the properties of each service which should be set and example values according to assumptions stated above.

aet-osgi-configuration

Collectors and comparators configuration

There are two more services that require configuration which are not present on the diagram above. The services are AET Collector Message Listener and AET Comparator Message Listener. There must be at least one of each of those services configured. Below there are listed the properties of each of above mentioned services with required values.

AET Collector Message Listener
Property name Value
Collector name Has to be unique within Collector Message Listeners.
Consumer queue name Fixed value AET.collectorJobs
Producer queue name Fixed value AET.collectorResults
Embedded Proxy Server Port Has to be unique within Collector Message Listeners.
AET Comparator Message Listener
Property name Value
Comparator name Has to be unique within Comparator Message Listeners.
Consumer queue name Fixed value AET.comparatorJobs
Producer queue name Fixed value AET.comparatorResults

Defining Suite

Test suite

In general the test suite is an XML document that defines tests conducted on a collection of web pages. This chapter covers the test suite API, with a description of its each element.

Sample test suite

<?xml version="1.0" encoding="UTF-8" ?>
<!-- Each test suite consists of one suite -->
<suite name="test-suite" company="cognifide" project="project">
    <!-- The First test of Test Suite -->
    <!-- The flow is [collect] [compare] [urls] -->
    <test name="first-test" useProxy="rest">
        <!-- Description of the collect phase -->
        <collect>
            <open/>
            <resolution width="800" height="600" />
            <!-- sleep 1500 ms before next steps - used on every url defined in urls -->
            <sleep duration="1500"/>
            <screen/>
            <source/>
            <status-codes/>
            <js-errors/>
        </collect>
        <!-- Description of compare phase, says what collected data should be compared to the patterns, can also define the exact comparator. If none chosen, the default one is taken. -->
        <compare xmlns="http://www.cognifide.com/aet/compare/">
            <screen comparator="layout"/>
            <source comparator="w3c-html5"/>
            <status-codes filterRange="400,600"/>
            <js-errors>
                <js-errors-filter source="http://w.iplsc.com/external/jquery/jquery-1.8.3.js" line="2" />
            </js-errors>
        </compare>
        <!-- List of urls which will be taken into tests -->
        <urls>
            <url href="http://www.cognifide.com"/>
        </urls>
    </test>
</suite>

The root element of the test suite definition is the suite element.

suite

! Important
When defining the suite the user should think of the following three mandatory parameters properly: name, company, project. These parameters are used by the AET System to identify the suite.

Any change in one of these parameter values in the future will occur in treating the suite as a completely new one which will in effect gather all patterns from scratch.

The Root element for the xml definition, each test suite definition consists of exactly one suite tag.

Attribute name Description Mandatory
name Name of the test suite. It should contain lowercase letters, digits and/or characters: -, _ only. yes
company Name of the company. It should contain lowercase letters, digits and/or characters: - only. yes
project Name of the project. It should contain lowercase letters, digits and/or characters: - only. yes
domain General domain name consistent for all urls considered. Every url link is built as a concatenation of the domain name and the href attribute of it. If the domain property is not set, then the href value in the url definition should contain a full valid url. See more in the [[Urls Urls]] section.

The suite element contains one or more test elements.

Suite Structure

test

This tag is definition of the single test in test suite. Test suite can contain many tests.

Attribute name Description Mandatory
name Name of the test. Should consists only of letters, digits and/or characters: -, _. This value is also presented on report (more details in [[Suite Report SuiteReport]] section).
useProxy Defines which (if any) Proxy should be used during collection phase. If not provided, empty or set with "false", proxy won't be used. If set to "true", default Proxy Manager will be used. Otherwise Proxy Manager with provided name will be used (see Proxy). Proxy is needed by Status Codes Collector and Header Modifier. no
zIndex Specifies order of tests on HTML Report. A test with greater zIndex is always before test with lower value. Default value is 0. This attribute accepts integers in range <-2147483648; 2147483647>. no

Each test element contains:

  • one collect and one compare element - test execution phases,
  • one urls element - list of urls to process.
Proxy

Web proxy is required for some of the AET features:

AET proxy is currently provided by BrowserMob Proxy .

rest

Rest proxy requires standalone Browsermob server. See Linux and Windows Setup for more details. This proxy is used as default when useProxy is set to "true" (which is equivalent to setting useProxy="rest").

Example usage

<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="header-modify-test" useProxy="rest">
      ...
    </test>
    ...
</suite>

collect

This tag contain list of collectors and modifiers which will be run. It specifies what pages' data should be collected and it allows for some data modification before collection step. All collect steps are processed in defined order.

Each collector provides some specific result of gathering current data (i.e. png, html files) and a common metadata file - result.json.

Following elements are available in collect element:

compare

This tag contain list of Comparators. Each comparator takes collected resource of defined type and runs it against comparator. It provides some specific result files illustrating found differences (i.e png, html files) and a common metadata file - result.json.

Each resource type has default comparator, user can use other comparators for each type by providing attribute comparator with comparator name, e.g.:

<source comparator="my_source_comparator"/>

runs my_source_comparator against each source collected during collection phase. Each comparator can contain list of Data Filters which will be performed before each compare phase.

Data filters are used to modify gathered data before these data are passed to comparator. For example you may remove some node from html tree. Data filters are defined in test suite xml as subnodes of comparator node.

Each Data Filter has predefined type of data on which it operates.

urls

See Urls.

Running Suite

Currently, running an AET suite requires using aet-maven-plugin which is an AET client application.

Requirements

  • Maven installed (recommended version - 3.0.4).
  • Proper version of AET Maven plugin installed.
  • Well-formed and valid xml test suite file available (described with details in Defining Suite chapter),
  • pom.xml file with defined aet-maven-plugin configuration (described below).

pom.xml

This file (pom.xml) is a Maven tool configuration file that contains information about the project and configuration details used by Maven to build the project.

Running AET suite requires creating and configuring such a file. The File presented below might be used as a template for setup AET suite runs:

<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
    <modelVersion>4.0.0</modelVersion>

    <groupId>{PROJECT-GROUP}</groupId>
    <artifactId>{PROJECT-NAME}</artifactId>
    <version>1.0.0</version>
    <packaging>pom</packaging>

    <name>Tests</name>
    <url>http://www.example.com</url>

    <properties>
        <aet.version>{PLUGIN-VERSION}</aet.version>
        <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
    </properties>

    <build>
        <plugins>
            <plugin>
                <groupId>com.cognifide.aet</groupId>
                <artifactId>aet-maven-plugin</artifactId>
                <version>${aet.version}</version>
            </plugin>
        </plugins>
    </build>
</project>

User should configure three variables before proceeding to the next steps:

  • {PROJECT-GROUP} which is a group the project belongs to. It should follow the package name rules, i.e. it is reversed domain name controlled by project owner and consists of lowercase letters and dots,
    • example: com.example.test
  • {PROJECT-NAME} which is this build identifier for Maven tool. It should consist only of lowercase letters and - characters,
    • example: aet-sanity-test
  • {PLUGIN-VERSION} which should be set to the aet-maven-plugin version currently used
    • example: 1.0.0

Having the version as the maven property (${aet.version}) enables defining this parameter from the command line later, e.g. -Daet.version=1.1.0.

Running suite from command line

Running the AET suite with AET Maven plugin from the command line can be done by invoking a maven command in the directory where the pom.xml file has been defined:

mvn aet:run -DtestSuite=FULL_PATH_TO_TEST_SUITE

The testSuite parameter is the path to the xml suite configuration file.

During test suite processing there will be information on its progress displayed in the console. It reflects how many artifacts were currently collected, compared and reported. When processing is finished the information about the processing status - BUILD SUCCESS or BUILD FAILURE - is displayed in the console.

When the test run completes, the resulting report files can be found in the maven run target folder.

Check Client Application for more details about aet-maven-plugin.

Tips and recommendations

Generally it is a good idea to create a separate SCM repository (e.g. GIT or SVN) for AET suites. This will enable running AET suites using Jenkins easily.

Tracking Progress

How to read AET Reports and real time progress

AET test reports are updated on real time basis and can be viewed on the console. This progress information is accessible in using two methods:

as a command line and with use of Jenkins job. To see progress

  • log on Jenkins
  • choose proper build execution from Build history panel and
  • click Console Output.

For every test suite started the execution information is provided in the progress log:

[INFO] ********************************************************************************
[INFO] ********************** Job Setup finished at 10:14:43.249.**********************
[INFO] *** Suite is now processed by the system, progress will be available below. ****
[INFO] ********************************************************************************

During test processing detailed information about actual progress is displayed as in the following example:

...
[INFO] [06:34:20.680]: COLLECTED: [success: 0, total: 72] ::: COMPARED: [success: 0, total: 0]
[INFO] [06:34:31.686]: COLLECTED: [success: 1, total: 72] ::: COMPARED: [success: 1, total: 1]
[INFO] [06:34:35.689]: COLLECTED: [success: 2, total: 72] ::: COMPARED: [success: 1, total: 2]
[INFO] [06:34:36.691]: COLLECTED: [success: 2, total: 72] ::: COMPARED: [success: 2, total: 2]
[INFO] [06:34:43.695]: COLLECTED: [success: 3, total: 72] ::: COMPARED: [success: 2, total: 3]
[INFO] [06:34:44.698]: COLLECTED: [success: 3, total: 72] ::: COMPARED: [success: 3, total: 3]
...

where:

collected - shows results of collectors' work - how many artifacts have been successfully collected and what is the total number of all artifacts to be collected,

compared - shows results of comparators' work - how many artifacts have been successfully compared and what is the total number of all artifacts to be compared. The total number of artifacts to be compared depends on collectors' work progress - increases when the number of successfully collected artifacts increase.

If there are problems during processing, warning information with some description of processing step and its parameters is displayed:

[WARN] CollectionStep: source named source with parameters: {} thrown exception. TestName: comparator-Source-Long-Response-FAILED UrlName: comparators/source/failed_long_response.jsp Url: http://192.168.123.100:9090/sample-site/sanity/comparators/source/failed_long_response.jsp

In this example source collector failed to collect necessary artifacts. This information is subsequently reflected in the progress log:

...
[INFO] [06:36:44.832]: COLLECTED: [success: 46, failed: 1, total: 72] ::: COMPARED: [success: 46, total: 46]
[INFO] [06:36:50.837]: COLLECTED: [success: 47, failed: 1, total: 72] ::: COMPARED: [success: 47, total: 47]
[INFO] [06:36:52.840]: COLLECTED: [success: 48, failed: 1, total: 72] ::: COMPARED: [success: 47, total: 48]
...

In the example above one artifact has failed during collection phase.

When tests successfully finish - command line

When the AET test processing completes the information about received reports and processing status - BUILD SUCCESS or BUILD FAILURE is shown on the console - as shown below:

[INFO] Received report message: ReportMessage{company=aet-demo-sanity, project=demo-sanity-test, testSuiteName=main, status=OK, environment=win7-ff16, domain=http://192.168.123.100:9090/sample-site/sanity/, correlationId=aet-demo-sanity-demo-sanity-test-main-1426570459612}
[INFO] [06:38:03.549]: COLLECTED: [success: 71, failed: 1, total: 72] ::: COMPARED: [success: 71, total: 71]
[INFO] Received report message: ReportMessage{company=aet-demo-sanity, project=demo-sanity-test, testSuiteName=main, status=OK, environment=win7-ff16, domain=http://192.168.123.100:9090/sample-site/sanity/, correlationId=aet-demo-sanity-demo-sanity-test-main-1426570459612}
[INFO] Total: 2 of 2 reports received.
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 3:45.645s
[INFO] Finished at: Tue Mar 17 06:38:03 CET 2015
[INFO] Final Memory: 14M/246M
[INFO] ------------------------------------------------------------------------

BUILD SUCCESS - status means that test processing is successfully finished and reports are generated in target folder.

BUILD FAILURE - status means that there were some technical problem during processing for example database is not responding and it is not possible to receive reports.

When test is successfully finished - Jenkins job

Jenkins console output presents the same information as described above, but if test suite is defined to generate xunit-report additional information such as Junit processing is logged on console:

[xUnit] [INFO] - Starting to record.
[xUnit] [INFO] - Processing JUnit
[xUnit] [INFO] - [JUnit] - 1 test report file(s) were found with the pattern 'test-suite/target/xunit-report.xml' relative to '/var/lib/jenkins/jobs/aet-sanity-test-integration/workspace' for the testing framework 'JUnit'.
[xUnit] [INFO] - Converting '/var/lib/jenkins/jobs/aet-sanity-test-integration/workspace/test-suite/target/xunit-report.xml' .
[xUnit] [INFO] - Check 'Failed Tests' threshold.
[xUnit] [INFO] - The new number of tests for this category exceeds the specified 'new unstable' threshold value.
[xUnit] [INFO] - Setting the build status to UNSTABLE
[xUnit] [INFO] - Stopping recording.
Build step 'Publish xUnit test result report' changed build result to UNSTABLE
Finished: UNSTABLE

The meaning of 'Successful' and 'Failed' build is quite different here, because final build status depends mainly on tests results and thresholds configuration. The build can result with BUILD SUCCESS status (which means that all workers - collectors, comparators, reporters finish their work and proper reports were generated), but final Jenkins build status can be for example UNSTABLE becase there were some new test failures.

A Jenkins build is considered as UNSTABLE (yellow) or FAILURE (red) if the new (tests that failed now, but did not fail in previous run) or total number of failed tests exceeds the specified thresholds. For example:when "yellow total" threshold is set to 0 and one or more test cases failed, then build is mark as UNSTABLE.

Features

AET tests can use a number of useful features which check different elements of a given page. You can find out more information about them on the subpages of this page.

Below you can find a few most common cases which demonstrate how to use these features.

Compare layout without dynamic content

This is a case when you want to test a layout of some page by making a screenshot of this page in a specified resolution. Your page has some dynamic content e.g. carousel or advertisement and you don't want it to influence the result of your test. The following code snippet shows the test suite for such a case:

<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="company" project="project">
    <test name="first-test" useProxy="rest">
        <collect>
            <open/>
            <hide xpath="//div[@id='mw-panel']" />
            <resolution width="800" height="600" />
            <sleep duration="1500"/>
            <screen/>
        </collect>
        <compare>
            <screen comparator="layout"/>
        </compare>
        <urls>
            <url href="https://en.wikipedia.org/wiki/Main_Page"/>
        </urls>
    </test>
</suite>

This test checks the layout of Wikipedia main page. After opening the page Hide Modifier is used to hide the navigation bar on the left side of the page. Then Resolution Modifier is used to set the screenshot resolution to 800x600 and Screen Collector takes a screenshot. Finally Layout Comparator compares the page layout to the one collected during the previous test run.

Collect status codes from desired range

This is a case when you want to check the status codes of requests generated by the page and you are only interested in a specific range of codes e.g. client errors (codes 400-499). The following code snippet shows the test suite for such a case:

<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="company" project="project">
    <test name="first-test" useProxy="rest">
        <collect>
            <open/>
            <status-codes />
        </collect>
        <compare>
            <status-codes filterRange="400,499" />
        </compare>
        <urls>
            <url href="https://en.wikipedia.org/wiki/Main_Pagee"/>
        </urls>
    </test>
</suite>

This test uses Status Codes Collector to gather status codes for a given url (which in this case points to a non-existent resource). Then Status Codes Comparator is used to display status codes that fit the range starting from 400 up to 499.

Add cookie to remove cookie consent dialog

This is a case when you want to dismiss a dialog asking for consent for storing cookies which has to be displayed if the page needs to be compliant with the EU legislation. Some pages make use of cookies to determine if a dialog should be displayed. The following code snippet shows the test suite for such a case:

<suite name="test-suite" company="company" project="project">
    <test name="first-test" useProxy="rest">
        <collect>
            <modify-cookie action="add" cookie-name="eu_cn" cookie-value="1" />
            <open/>
            <sleep duration="1500"/>
            <screen/>
        </collect>
        <compare>
            <screen comparator="layout"/>
        </compare>
        <urls>
            <url href="http://example.com/"/>
        </urls>
    </test>
</suite>

This test makes use of Cookie Modifier to add the eu_cn cookie with the value 1 which in this example indicates that the user already gave her/his consent to store cookies. After that screenshots are collected and the layout of the page is compared to the previous test run.

Collect JavaScript errors and ignore specific ones

This is a case when you want to check if there are any JavaScript errors on the page. You know that, for example, some third party library used contains an error but you don't want it to affect your test. The following code snippet shows the test suite for such a case:

<suite name="test-suite" company="company" project="project">
    <test name="first-test" useProxy="rest">
        <collect>
            <open/>
            <js-errors/>
        </collect>
        <compare>
            <js-errors>
                <js-errors-filter error="Uncaught ReferenceError: variable is not defined"/>
            </js-errors>
        </compare>
        <urls>
            <url href="http://example.com/"/>
        </urls>
    </test>
</suite>

This test makes use of JS Errors Collector to collect JavaScript errors. Then JS Errors Comparator is used do display the issues. Within the comparator JS Errors Data Filter ignoring a specified error is defined.

Compare source ignoring embedded scripts

This is a case, when you want to check the source of the page but you want to exclude some code from comparison. It could be, for instance, an embedded analytics script. The following code snippet shows the test suite for such a case:

<suite name="test-suite" company="company" project="project">
    <test name="first-test" useProxy="rest">
        <collect>
            <source />
        </collect>
        <compare>
            <source comparator="source" compareType="allFormatted">
                <remove-nodes xpath="//script" />
            </source>
        </compare>
        <urls>
            <url href="https://en.wikipedia.org/wiki/Main_Page"/>
        </urls>
    </test>
</suite>

This test makes use of Source Collector to gather source code. Then Source Comparator compares the source of the page with the previous test. The applied Remove Nodes Data Filter removes all <script> nodes from the source before comparison takes place.

Open

Open module is special operand for collect phase. It is responsible for opening web page for given url and preparing browser environment to perform chain of collections and modifications.

Second usage of this module is to allow user easily perform actions before page is being opened, such as modify headers, cookies etc.

! Open module
Each collect phase must contain open module.
! Note
In some cases it is recommended to use **[[Sleep Modifier

Module name: open

Parameters

No parameters

Example Usage

<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="open-test">
      <collect>
        ...
        <!-- example action before page is opened -->
        <open/>
        <!-- collect page data -->
        ...
      </collect>
      <compare>
        ...
      </compare>
      <urls>
        ...
      </urls>
    </test>
    ...
    <reports>
      ...
    </reports>
</suite>

Collectors

The collector is a module which is responsible for collecting data from tested pages.

Each collector presented in the section below consists of the following two elements:

  • module name (produced resource type),
  • parameters.
Module name (produced resource type)

This name is a unique identifier of a system functionality. Each collector has its unique name which should also be unique for all the modules in the collect phase. This is always a name of the tag definition for the collector.

The AET System does not know what work will be performed by the collector when it reads the suite definition. The only thing that is known is the module name. The system will recognize which collector should be called by matching the definition from the collect phase with the name registered in the system. When no collector with a defined name is found in the system, a system exception will occur and the test will be not performed. This solution enables to add new features to the system with no system downtime (just by installing a new feature bundle).

Each collector produces a resource of a defined type. This type can be later recognized by comparators and data filters. Two collectors can't produce data with the same resource type. A produced resource type is always equal to the collector module name.

Parameters

This is a set of key-value pairs with the use of which the user can pass some configuration and information to the collector. Parameters for collectors are usually not mandatory - passing this parameter is not obligatory. Usually this is the extension of some collector functionality. However, there is one special property: name. The collector with the name set can be treated in a special way by comparators (some comparators may look only for collection results from collectors with a specific name) e.g.:

...
<collect>
  <open/>
  <sleep duration="1000"/>
  <resolution width="1280" height="1024" name="desktop"/>
  <screen name="desktop"/>
  <resolution width="768" height="1024" name="tablet"/>
  <screen name="tablet"/
  <resolution width="320" height="480" name="mobile"/>
  <screen name="mobile"/>
  
</collect>
<compare>
  <screen collectorName="mobile"/>
</compare>
...

During the collect phase, three screenshot with different resolutions will be taken and saved in the database. However, only one of them (mobile) will be compared to the pattern during the comparison phase and presented in the report (under the "Layout For Mobile" section).

Definitions illustration

The following picture depicts the elements described before:

Collect phase definitions

where:

  1. Module name (produced resource type),
  2. Parameters,
  3. Special collector property: name,
  4. Special comparator property: collectorName.

Accessibility Collector BETA

! Beta Version
This AET Plugin is currently in a BETA version.

Accessibility Collector is responsible for collecting validation results containing violations of the defined coding standard found on the page. It makes use of the HTML_CodeSniffer tool to find violations.

Module name: accessibility

Parameters
Parameter Value Description Mandatory
standard WCAG2A
WCAG2AA (default)
WCAG2AAA
The parameter specifies the standard which the page is validated against. More information on the standards is available at: WCAG2 no
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="source-test">
        <collect>
            ...
            <accessibility standard="WCAG2AAA" />
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Client Side Performance Collector BETA

! Beta Version
This AET Plugin is currently in a BETA version.

Client Side Performance Collector is responsible for collecting performance analysis results. The collector makes use of the YSlow tool to perform analysis.

Module name: client-side-performance

! Important information
In order to use this collector *[[proxy
Parameters

No parameters.

Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project" environment="win7-ff16">
    <test name="source-test" useProxy="rest">
        <collect>
            ...
            <client-side-performance />
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Cookie Collector

Cookie collector is responsible for collecting cookies.

Module name: cookie

Parameters

No parameters.

Sample Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="cookie-test">
        <collect>
            ...
            <cookie/>
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

JS Errors Collector

JS Errors Collector is responsible for collecting javascript errors occuring on given page.

Module name: js-errors

Parameters

No parameters.

Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="js-errors-test">
        <collect>
            ...
            <js-errors/>
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Screen Collector

! Compare collected screenshot
Please remember that defining collector and not using it during comparison phase is configuration error. From now on suites that define screen collection and does not use it during comparison phase will be rejected during suite validation phase.
! Notice

Screen Collector is responsible for collecting screenshot of the page or just part of it by specifying element locator (xpatc or css) under given URL.

Module name: screen

Note that you cannot maximize the window and specify the dimension at the same time. If no parameters provided, default browser size is set before taking screenshot.

Parameters
Parameter Value Description Mandatory
xpath xpath_to_element Xpath to element(s) optional (either xpath or css)
css css_selector_to_element css selector to element(s) optional (either xpath or css)
timeout 1000ms The timeout for the element to appear, in milliseconds. The max value of this parameter is 15000 milliseconds (15 seconds). no (default will be used) this parameter applies only in conjunction with xpath or css param
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="screen-test">
        <collect>
            ...
            <screen name="desktop" />
            <screen name="carouselComponent" css=".carousel"/>
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Instead of

<screen width="1280" height="1024" name="desktop" />

please use:

<resolution width="1280" height="1024"/>
<sleep duration="1000" />
<screen name="desktop" />
! Note
Before taking screenshot [[Hide modifier

Source Collector

Source Collector is responsible for collecting source of the page under given URL. Unlike others collectors source collector doesn't use web driver, it connects directly to web server.

Module name: source

! Note
System is waiting up to 20 seconds before request is timed out. This parameter is configurable via OSGi configuration (AET Source Collector Factory).
Parameters

No parameters.

Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="source-test">
        <collect>
            ...
            <source />
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Status Codes Collector

Status Codes Collector is responsible for collecting status codes returned by resources on the processed page.

Module name: status-codes

! Important information
In order to use this collector *[[proxy
Parameters

No parameters.

Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="status-codes-test" useProxy="rest">
        <collect>
            ...
            <status-codes />
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Modifiers

Modifier is module which performs particular modification on data before collection happens.

Each modifier consists of two elements:

  • module name,
  • parameters.
Module name

This name is unique identifier for each modifier (and each module in collect phase).

Parameters

This is set of key-value pairs using which user can pass some configuration and information to modifier. Parameters for modifiers can be divided into two groups:

  • mandatory - parameters without which modification will not be possible,
  • optional - passing this parameter is not obligatory, usually they trigger some functionality extensions.

Click Modifier

Click Modifier allows to perform a click action on some element on the page. When the element has not been found (e.g. because of an improper xpath value) a warning message will be logged but the test will be passed to next steps.

Module name: click

! Important information
In order to use this modifier it must be declared after the open module in the definition of the XML test suite.

Remember that the element that will be clicked must be visible at the moment of performing the click action.
Parameters
Parameter Default value Description Mandatory
xpath xpath of the element to be clicked xpath or css
css css selector of the element to be clicked xpath or css
timeout 1000ms The timeout for the element to appear, in milliseconds. The max value of this parameter is 15000 milliseconds (15 seconds). no (default will be used)
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="click-test">
        <collect>
            <open />
            <resolution width="200" height="300"/>
            ...
            <click xpath="//*[@id='header_0_container1_0_pRow']/div[1]/div/div/a/img" timeout="3000" />
            <click css="#logo > a"/>
            <sleep duration="2000" />
            ...
            <screen />
            ...
        </collect>
        <compare>
            ...
            <screen comparator="layout" />
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Cookie Modifier

Cookie Modifier allows to modify cookies for a given page, i.e. add or remove some cookies.

Module name: modify-cookie

! Important information
In order to use this modifier it must be declared before the open module in the definition of the test suite XML. When declared after the open module (but before Cookie Collector) it can be used as a filter for Cookie Collector.
Parameters
Parameter Value Description Mandatory
action add
remove
Specifies what action should be taken with a given cookie yes
cookie-name Cookie name yes
cookie-value Cookie value Yes, if the add action is chosen
cookie-domain Cookie domain attribute value No, used only if the add action is chosen
cookie-path Cookie path attribute value No, used only if the add action is chosen
! Note
If cookie-domain is provided WebDriver will reject cookies unless the Domain attribute specifies a scope for the cookie that includes the origin server. For example, the user agent will accept a cookie with the Domain attribute example.com or foo.example.com from foo.example.com, but the user agent will not accept a cookie with a Domain attribute of bar.example.com or of baz.foo.example.com. For more information read here.
! Note
If cookie-path is provided WebDriver will reject cookie unless the path portion of the url matches (or is a subdirectory of) the cookie's Path attribute, where the %x2F (/) character is interpreted as a directory separator.
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="cookie-modify-test">
        <collect>
            ...
            <modify-cookie action="add" cookie-name="sample-cookie" cookie-value="sample-cookie-value"/>
            <modify-cookie action="remove" cookie-name="another-cookie"/>
            ...
            <open />
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Header Modifier

Header Modifier is responsible for injecting additional headers to the page before it is opened to test.

Module name: header

! Important information
In order to use this modifier it must be declared before the open module in the definition of the test suite XML and *[[proxy
Parameters
Parameter Value Description Mandatory
key x Key for the header yes
value y Value for the header yes
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="header-modify-test">
        <collect>
            ...
            <header key="Authorization" value="Basic emVuT2FyZXVuOnozbkdAckQZbiE=" />
            ...
            <open />
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Hide Modifier

Hide Modifier is responsible for hiding an element on the page that is redundant for testing and/or can make the page look different each time a screenshot is taken. It affects Screen Collector results. Hiding is performed by setting the css visibility property to hidden. It works with webDriver only. You can hide many elements by defining many <hide> nodes. If the xpath covers more than one element then all the elements matching the xpath will be hidden.

Module name: hide

! Important information
In order to use this modifier it must be declared after the open module in the definition of the test suite XML.
Parameters
Parameter Value Description Mandatory
xpath xpath_to_element Xpath to element(s) to hide xpath or css
css css_selector_to_element css selector to element(s) to hide xpath or css
timeout 1000ms The timeout for the element to appear, in milliseconds. The max value of this parameter is 15000 milliseconds (15 seconds). no (default will be used)
leaveBlankSpace boolean Defines if element(s) should be invisible (effect as using display=none) or should be not displayed (effect as using visibility=hidden). When set to true, blank and transparent space is left in place of the hidden element, otherwise, element is completely removed from the view. When not defined, hide modifier behaves as if leaveBlankSpace property was set to true. no
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="hide-test">
        <collect>
            <open />          
            ...
            <hide xpath="//*[@id='logo']" />
            <hide css="#ad-section > a" />            
            ...
            <resolution width="1200" height="760" />
            <screen />
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Execute Java Script Modifier

Execute Java Script Modifier is responsible for executing specified js command.

Module name: executejavascript

Parameters
Parameter Value Description Mandatory
cmd js script Javascript command that will be executed yes
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="hide-test">
        <collect>
            <open />
            ...
            <executejavascript cmd="document.body.style.background = 'green';" />
            ...
            <resolution width="1200" height="760" />
            <screen />
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Login Modifier

Login Modifier allows to login into pages that have access secured with login form. If input element isn't available (for example it's not loaded yet) then Login Modifier will wait up to 10s for login input, then for password input and at the end for submit button to appear. If the login form isn't ready or logging in fails for any other reason, we will try again 3 times by default.

Login modifier checks if login-token-key cookie is present to decide if authentication was successful. If cookie with specified name is present, it assumes that credentials were valid.

Module name: login

! Important information
In order to use this modifier it must be declared before open module in test suite XML definition.
Parameters
Parameter Value Mandatory Default value
login User's login no admin
password Password no admin
login-page Url to login page no http://localhost:4502/libs/granite/core/content/login.html
login-input-selector Xpath expression for login input no //input[@name='j_username']
password-input-selector Xpath expression for password input no //input[@name='j_password']
submit-button-selector Xpath expression for submit button no //*[@type='submit']
login-token-key Name for cookie we get after successfull login no login-token
timeout Number of milliseconds (between 0 and 10000) that modifier will wait to login page response after submiting credentials. It is also used between reattempts to log in. no 5000
force-login Enforces login even when login cookie is present. no false
retrial-number Number of reattempts to log in. It's a way to deal with unpredictable problem with logging in. no 3
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="login-test">
        <collect>
            <login login="user"
                password="password"
                login-page="http://192.168.180.19:5503/libs/cq/core/content/login.html"
                login-input-selector="//input[@name='j_username']"
                password-input-selector="//input[@name='j_password']"
                submit-button-selector="//*[@type='submit']" />
            <open />
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Resolution Modifier

Resolution Modifier is responsible for changing browser screen size. Affects Screen Collector results.

! Note
Please note that final resoulution of screenshots may be different when scrollbar is dispayed.

Default width of Firefox's Scrollbar is equal to 33px. (so when you want to grab viewport of size 1024, then set width parameter to 1057px)

Module name: resolution

Parameters
Parameter Value Description Mandatory
width int (1 to 100000) Window width no
height int (1 to 100000) Window height no
! Important information
You cannot maximize the window and specify the dimension at the same time. If you specify height param you have to also specify width param and vice versa.
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="resolution-modify-test">
        <collect>
            ...
            <resolution width="200" height="300"/>
            <sleep duration="1000"/>
            <screen />
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Sleep Modifier

Sleep Modifier is responsible for temporarily ceasing execution, causes current thread to sleep. It is useful in situations when page resources have a long loading time - it suspends next collectors for some time.

Module name: sleep

Parameters
Parameter Value Description Mandatory
duration int (1 to 30000) Sleep time, in milliseconds yes
! Important information
One sleep duration cannot be longer than 30000 milliseconds (30 seconds).

Two consecutive sleep modifiers are not allowed.

Total sleep duration (sum of all sleeps) in test collection phase cannot be longer than 120000 milliseconds (2 minutes).
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="sleep-test">
        <collect>
            ...
            <open />
            ...
            <sleep duration="3000" />
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Wait For Page Loaded Modifier

Wait For Page Loaded Modifier waits until the page is loaded (all DOM elements are loaded - this does not wait for dynamically loaded elements by e.g. JavaScript) or a fixed amount of time is up. The idea of waiting for the page is counting the amount of elements [by findElements(By.xpath("//*"))] on the current page state in a loop. If the number of elements has increased since the last checkout, continue the loop (or break if the timeout is reached). Else if the number of elements is still, assume the page is loaded and finish waiting.

Module name: wait-for-page-loaded

Parameters

No parameters.

! Important information
Timeout for waiting is 10000 milliseconds.

The Page is checked every 1000 milliseconds.
Sample Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="wait-for-page-loaded-test">
        <collect>
            ...
            <open />
            ...
            <wait-for-page-loaded />
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Execute Java Script Modifier

Execute Java Script Modifier is responsible for executing specified js command.

Module name: executejavascript

Parameters
Parameter Value Description Mandatory
cmd js script Javascript command that will be executed yes
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="hide-test">
        <collect>
            <open />
            ...
            <executejavascript cmd="document.body.style.background = 'green';" />
            ...
            <resolution width="1200" height="760" />
            <screen />
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Comparators

The comparator is a module which is responsible for consuming data and comparing it to the pattern or against a defined set of rules.

Each comparator presented in the section below consists of the following three elements:

  • consumed resource type,
  • module name (comparator),
  • parameters.
Consumed resource type

This is a name of the resource type consumed by the defined comparator. This is always a name of the tag definition for the comparator.

This name tells the system which resource type should be consumed by the defined comparator. When no comparator in the system can consume the defined resource type, a system exception will occur and the test will not be performed. This solution enables to add new features to the system with no system downtime (just by installing a new feature bundle).

Each comparator can consume only one resource type.

Module name (comparator)

This is a special parameter, a unique name for the comparator type treated as the interpretation of a given resource type. The system will recognize which implementation of the comparator should be called by this name. This parameter is required for each comparator but the system will assume a default comparator for each resource type when no comparator property is defined.

Default comparators for the consumed resource names

Sample usage can be found in the system for the source comparison where two comparators exist: W3C HTML5 Comparator and Source Comparator. The example below shows its sample usage:

...
<collect>
    <open/>
    <source/>
</collect>
<compare>
    <source comparator="source"/>
    <source comparator="w3c-html5"/>
</compare>
...

When the test defined as shown above is executed, collection of a page source is performed only once but the result of this collection is used twice during the comparison phase. First by Source Comparator and then by W3C HTML5 Comparator.

Parameters

This is a set of key-value pairs allowing the user to pass some configuration and information to the comparator. Parameters for comparators can be divided into the following two groups:

  • mandatory - parameters which comparison will be not possible without,
  • optional - passing this parameter is not obligatory, usually this is the extension of some comparator functionality.
collectorName

There exists the special comparator property collectorName which is connected to the collector name property. By using the collectorName property combined with the collector name property the user can control which comparator instance compares results collected by a particular collector. See examples below:

...
<collect>
    <open/>
    <sleep duration="1000"/>
    <resolution width="1280" height="1024" name="desktop"/>
    <screen name="desktop"/>
    <resolution width="768" height="1024" name="tablet"/>
    <screen name="tablet"/>
    <resolution width="320" height="480" name="mobile"/>
    <screen name="mobile"/>
</collect>
<compare>
    <screen collectorName="desktop"/>
    <screen collectorName="mobile"/>
    <screen collectorName="tablet"/>
</compare>
...

The configuration above will trigger three screens collections (desktop, tablet and mobile) and two comparisons (mobile and tablet). The screenshot taken for desktop will not be compared.

...
<collect>
    <open/>
    <sleep duration="1000"/>
     <resolution width="1280" height="1024" name="desktop"/>
     <screen name="desktop"/>
     <resolution width="768" height="1024" name="tablet"/>
     <screen name="tablet"/>
     <resolution width="320" height="480" name="mobile"/>
     <screen name="mobile"/>
</collect>
<compare>
    <screen/>
</compare>
...

The configuration above will trigger three screens collections (desktop, tablet and mobile) and three comparisons (desktop, table, mobile).

...
<collect>
    <open/>
    <sleep duration="1000"/>
    <resolution width="1280" height="1024" name="desktop"/>
    <screen name="desktop"/>
    <resolution width="768" height="1024" name="tablet"/>
    <screen name="tablet"/>
    <resolution width="320" height="480" name="mobile"/>
    <screen name="mobile"/>
</collect>
<compare>
    <screen/>
    <screen collectorName="tablet"/>
</compare>
...

The configuration above will trigger three screens collections (desktop, tablet and mobile) and four comparisons (desktop, tablet, mobile and one additional for the tablet).

Definitions illustration

The following picture depicts definitions described earlier:

Compare phase definitions

where:

  1. Consumed resource type,
  2. Special property: collectorName,
  3. Special property: comparator,
  4. Module name (comparator).

Accessibility Comparator

! Beta Version
This AET Plugin is currently in a BETA version.

Accessibility Comparator is responsible for processing collected accessibility validation results. It makes use of the html CodeSniffer library.

Module name: accessibility

Resource name: accessibility

Parameters
Parameter Value Description Mandatory
report-level ERROR (default)

WARN

NOTICE
Violations of the ERROR type are only displayed in the report.

Violations of WARN and ERROR types are displayed in the report.

All violation types are displayed in the report.
no
ignore-notice boolean
(default: true)
If the ignore-notice=true test status does not depend on the number of notices.
If ignore-notice=false notices are treated as warnings in calculating the test status. Enforces the report-level = NOTICE.
no
showExcluded boolean
(default: true)
The flag that indicates if excluded issues (see [[Accessibility Data Filter AccessibilityDataFilter]]) should be displayed in the report. By default set to true.
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="accessibility-test">
        <collect>
            ...
            <accessibility />
            ...
        </collect>
        <compare>
            ...
            <accessibility report-level="WARN" />
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Client Side Performance Comparator

! Beta Version
This AET Plugin is currently in a BETA version.

Client Side Performance Comparator is responsible for processing collected client side performance analysis results. The comparator makes use of the YSlow tool in order to perform the comparison phase on collected results.

Module name: client-side-performance

Resource name: client-side-performance

Parameters

No parameters

Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="client-side-performance-test">
        <collect>
            ...
            <client-side-performance />
            ...
        </collect>
        <compare>
            ...
            <client-side-performance />
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Cookie Comparator

Cookie Comparator is responsible for processing collected cookies. This can be simply listing of collected cookies, verifying if a cookie exists or comparing a collected cookie to the pattern.

The cookie feature allows to collect patterns and can be rebased from the report only in the compare action mode.

Module name: cookie

Resource name: cookie

Parameters
Parameter Value Description Mandatory
action list

test

compare
Displays a list of cookies

Tests if a cookie with a given name and value exists

Compares the current data to the pattern (compares only cookie names, values are ignored)
no

If the action parameter is not provided, the default list action is performed
cookie-name The name of the cookie to test, applicable only for the test action yes, if action set to test
cookie-value The value of a cookie to test, applicable only for the test action no
showMatched boolean
(default: true)
Works only in the compare mode. The flag that says if matched cookies should be displayed in the report or not. By default set to true. no
Sample Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="cookie-test">
        <collect>
            ...
            <cookie />
            ...
        </collect>
        <compare>
            ...
            <cookie />
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

JS Errors Comparator

JS Errors Comparator is responsible for processing of collected javascript errors resource. In this case it is simply displaying list of javascript errors.

JS Errors feature do not allow to collect patterns, so it does not compare results with any patterns - rebase action is also not avaliable.

Module name: js-errors

Resource name: js-errors

Parameters

No parameters

Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="js-errors-test">
        <collect>
            ...
            <js-errors />
            ...
        </collect>
        <compare>
            ...
            <js-errors />
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>
! Important information
[[JS Errors Data Filter

Layout Comparator

Layout Comparator is responsible for comparing collected screenshot of page with pattern. This is default comparator for screen resource.

Can be rebased from report.

Module name: layout

Resource name: screen

Parameters

No parameters

Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="layout-compare-test">
        <collect>
            ...
            <screen />
            ...
        </collect>
        <compare>
            ...
            <screen comparator="layout" />
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>
Fast pre-comparison

Since AET 1.3 fast comparison of screenshots will be implemented. Taken screenshot MD5 will be matched against current pattern. If hashes will be the same, screenshot will be treated as one without differences and no further comparison will be performed.

Source Comparator

Source Comparator is responsible for comparing collected page source with pattern.

Can be rebased from report.

Module name: source

Resource name: source

Parameters
Parameter Value Description Mandatory
compareType content Compare only text inside HTML nodes. Ignore formatting, tag names and attributes. no
If compareType is not provided default all value is taken.
markup Compare only HTML markup and attributes. Ignore text inside HTML tags, formatting and white-spaces. Remove empty lines.
allFormatted Compare full source with formatting and white-spaces ignored. Remove empty lines.
all Compare all source (default).
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="source-compare-test">
        <collect>
            ...
            <source />
            ...
        </collect>
        <compare>
            ...
            <source comparator="source" compareType="markup" />
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>
! Important information
[[Extract Element Data Filter

Status Codes Comparator

Status Codes Comparator is responsible for processing collected status codes. In this case it is simply displaying the list of collected status codes from given page.

Status Codes feature do not allow to collect patterns, so it does not compare results with any patterns - rebase action is also not available.

Module name: status-codes

Resource name: status-codes

Parameters
Parameter Value Example Description Mandatory
filterRange x,y 400,500 Defines range of status codes that should be processed yes, if filterCodes is not present
filterCodes x,y,z 400,401,404 List of status codes that should be processed yes, if filterRange is not present
showExcluded boolean (default: true) true Flag that says if excluded codes (see [[Status Codes Data Filters StatusCodesDataFilters]]) should be displayed in report. By default set to true.
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="status-codes-test" useProxy="rest">
        <collect>
            ...
            <open />          
            ...
            <status-codes />
            ...
        </collect>
        <compare>
            ...
            <status-codes filterRange="400,404" />
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

W3C HTML5 Comparator

W3C HTML5 Comparator is responsible for validating collected page source against w3c standards using validator.nu. HTML5 is supported by this library.

W3C HTML5 feature do not allow to collect patterns, so it does not compare results with any patterns - rebase action is also not available.

Module name: w3c-html5

Resource name: source

Parameters
Parameter Value Description Mandatory
ignore-warnings boolean (default: true) If ignore-warnings="true" test status does not depend on the warnings amount, otherwise warnings counts as w3c errors when computing testcase status. no
errors-only boolean(default: true) This parameter will be removed from 1.5 AET Version!
Has the same result as ignore-warnings parameter.
no
! Mandatory parameter
Please remember, that using parameter comparator="w3c-html5" is mandatory while defining this comparator. More information about this parameter can be found in Comparators section.
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="w3c-html5-test">
        <collect>
            ...
            <open />          
            ...
            <source />
            ...
        </collect>
        <compare>
            ...
            <source comparator="w3c-html5" />
            ...
        </compare>
        <urls>
        ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Data Filters

Data filters are modules which narrow down the area which the comparison will be performed on.

They are nested in Comparators and apply only to the instance of the comparator which they are defined in.

Each data filter consists of two elements:

  • module name,
  • parameters.
Module name

This name is a unique identifier for each data filter (and each module in the compare phase).

Parameters

This is a set of key-value pairs the user can make use of to pass some configuration and information to the data filter. Parameters can be divided into two groups:

  • mandatory - parameters which filtering will be not possible without,
  • optional - passing this parameter is not obligatory, usually it triggers some functionality extension.

Accessibility Data Filter

Accessibility Data Filter filters out Accessibility issues - it removes the matched accessibility issues from reports. This filter can be only applied to the accessibility comparator tag in the test case. When more than one parameter is provided then only issues fully matched are filtered out.

Module name: accessibility-filter

Resource name: accessibility

Parameters
Parameter Value Description Mandatory
error string error The exact error message At least one parameter is required, ignored if 'errorPattern' parameter is provided
errorPattern regexp Regular expression that matches message text of issue to be filter out At least one parameter is required,
principle string principle The exact accessibility issue principle
line integer line number The line number in the file which the issue occurred in
column integer column number The column number in the file which the issue occurred is

Note:

  • error will be overridden by errorPattern if set.
  • If there are some If some XML-specific charactes (e.g. &) are in parameter's value, then they have to be escaped. Suite should be valid XML document.
Example Usage

In this example the exact match of the accessibility issue breaking principle "WCAG2A.Principle4.Guideline4_1.4_1_2.H91.Button.Name", at the line 21, the column 5 with the message "This button element does not have a name available to the accessibility API. Valid names are: title attribute, element content." will be totally ignored.

<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="accessibility-filter-test">
        <collect>
            ...
            <open/>
            ...
            <accessibility/>
            ...
        </collect>
        <compare>
            ...
            <accessibility>
                <accessibility-filter
                    error="This button element does not have a name available to the accessibility API. Valid names are: title attribute, element content."
                    principle="WCAG2A.Principle4.Guideline4_1.4_1_2.H91.Button.Name"
                    line="21"
                    column="5" />
                <accessibility-filter errorPattern="[\w]* button element does not have a name available .*" />
                <accessibility-filter error="This select element does not have a name available to an accessibility API. Valid names are: label element, title attribute." />
                <accessibility-filter principle="WCAG2A.Principle1.Guideline1_3.1_3_1.F68" />
                <accessibility-filter line="252" />
                <accessibility-filter column="6" />
                <accessibility-filter line="317" column="50" />
            </accessibility>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

There can be more than one accessibility-filter tag in the accessibility comparator e.g.:

<accessibility>
    <accessibility-filter principle="WCAG2A.Principle1.Guideline1_3.1_3_1.F68" />
    <accessibility-filter error="This select element does not have a name available to an accessibility API. Valid names are: label element, title attribute." />
    <accessibility-filter line="270" />
    <accessibility-filter line="314" />
    <accessibility-filter column="5" />
    <accessibility-filter errorPattern="^This button .* element content.$" />
</accessibility>

Extract Element Data Filter

Extract Element Data Filter allows to extract an element from the html source (collected by Screen Collector) by providing an id attribute or a class attribute. The found source of the element is processed by the comparator.

Module name: extract-element

Resource name: source

Parameters
Parameter Value Description Mandatory
elementId HTML id Id for the element to extract See the note below
class HTML class Class name for the element to extract See the note below
! Note
One of these parameters is required. Only one parameter (either the elementId attribute or the class attribute) can be provided.
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="extract-element-test">
        <collect>
            ...
            <open/>
            ...
            <source/>
            ...
        </collect>
        <compare>
            ...
            <source comparator="source">
                <extract-element elementId="login_form"/>
            <!-- OR -->
                <extract-element class="class_form"/>
            </source>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

JS Errors Data Filter

Js Errors Data Filter filters JS Errors Collector result - it removes matched javascript errors from reports.
This filter can be only applied to js-errors comparator tag in test case.
When more than one parameter is provided then only fully matched errors are filtered.
If some XML-specific charactes (e.g. &) are in parameter's value, then they must be escaped.

Module name: js-errors-filter

Resource name: js-errors

Parameters
Parameter Value Description Mandatory
error string error Exact error message At least one of parameter is required
source JavaScript filename suffix (see notes) below Source file name in which error occurred At least one of parameter is required
errorPattern pattern error text Regular expression that matches message text of issue to be filter out At least one parameter is required
line integer line number Line number in file in which error occurred At least one of parameter is required

Note:

  • filter will check if value of source param is a suffix of JS error source. So we can use "/jquery-1.8.3.js" to filter errors from all JQuery files regardless of path or even filter errors from all JavaScript files with ".js".
  • error param will be overridden by errorPattern if set
  • If there are some If some XML-specific charactes (e.g. &) are in parameter's value, then they have to be escaped. Suite should be valid XML document.
Example Usage

In this sample exact match of js error from file "http://w.iplsc.com/external/jquery/jquery-1.8.3.js", line 2 with message "Error: Syntax error, unrecognized expression: .iwa_block=pasek-ding" will be totally ignored (not included in report)

<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="js-errors-filter-test">
        <collect>
            ...
            <open/>
            ...
            <js-errors/>
            ...
        </collect>
        <compare>
            ...
            <js-errors>
                <js-errors-filter
                    error="Error: Syntax error, unrecognized expression: .iwa_block=pasek-ding"
                    line="2"
                    source="http://w.iplsc.com/external/jquery/jquery-1.8.3.js" />
                <js-errors-filter
                    source="/some/path/to/custom.js" />
                <js-errors-filter
                    errorPattern="^.*Syntax error, unrecognized expression.*$" />                    
            </js-errors>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

There can be more than one js-errors-filter tag in js-errors comparator eg:

<js-errors>
    <js-errors-filter error="Error: Syntax error, unrecognized expression: .iwa_block=pasek-ding" />
    <js-errors-filter source="http://w.iplsc.com/external/jquery/jquery-1.8.3.js"
                      line="2" />
</js-errors>

Remove Lines Data Filter

Remove Lines Data Filter allows to remove lines from compared source (data or pattern). This may be helpful when we need to compare page sources with dynamic content. We can then remove these dynamic content markup.

Line number in reports represents lines state after modification, so have in mind that marked lines have different lines number in real source.

Module name: remove-lines

Resource name: source

Parameters
Parameter Value Description Mandatory
dataRanges ranges of lines to remove from data Ranges should be provided in form a,b, this will be interpreted as closed interval of integers [a,b].Particular ranges should be separated by semicolons: a,b;c,d;e,f a>0, b>0 At least one of parameters is required.
patternRanges ranges of lines to remove from pattern Ranges should be provided in form a,b, this will be interpreted as closed interval of integers [a,b].Particular ranges should be separated by semicolons: a,b;c,d;e,f a>0, b>0

Examples:

Suppose we want to remove line 10: 10,10

Suppose we want to remove lines from 10 to 15: 10,15

Suppose we want to remove lines from 10 to 15, line 27 and lines from 30 to 38: 10,15;27,27;30,38

Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="my-test-suite" company="cognifide" project="project">
    <test name="remove-lines-test">
        <collect>
            ...
            <source/>
            ...
        </collect>
        <compare>
            ...
            <source comparator="source">
                <remove-lines dataRanges="10,15;27,27" patternRanges="10,14;27,28"/>
            </source>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Remove Nodes Data Filter

Remove Nodes Data Filter allows to delete some node(s) from html tree. Node(s) are defined by xpath selector.

! Important information
Html source has to be valid xml document

Name: remove-nodes

Resource name: source

Parameters
Parameter Value Description Mandatory
xpath xpath_to_node Xpath selector for nodes to remove yes
Example Usage
<?xml version="1.0" encoding="UTF-8"?>
<suite name="test-suite" company="Cognifide" project="project">
    <test name="remove-nodes-test">
        <collect>
            ...
            <open/>
            ...
            <source/>
            ...
        </collect>
        <compare>
            ...
            <source comparator="source">
                <remove-nodes xpath="//*[@id='blueBarNAXAnchor']/div/div/div/a/i"/>
            </source>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    <reports>
        ...
    </reports>
</suite>

Remove Regex Data Filters

Remove Regex Data Filter allows to remove parts of source based on regex expressions from compared source (data and/or pattern).
This may be helpful when we need to compare page sources with dynamic content. We can then remove these dynamic content markup.
See also Remove Lines and Remove Nodes data Filters.

Module name: remove-regexp

Resource name: source

Parameters
Parameter Value Mandatory
dataRegExp RegExp that will replace matched parts of data sources At least one of parameter is required.
patternRegExp RegExp that will replace matched parts of pattern sources
regExp RegExp that will replace matched parts of pattern and data sources
! Note
regExp value overrides dataRegExp and patternRegExp

Tip:
Use http://www.regexplanet.com/advanced/java/index.html to create check your Regular Expression and when ready use 'as a Java string' value in your testsuite.

Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="my-test-suite" company="cognifide" project="project">
    <test name="remove-regex-test">
        <collect>
            ...
            <source/>
            ...
        </collect>
        <compare>
            ...
            <source comparator="source">
                 <remove-regexp regExp='\"correlationId\": \".*\"'/>
            </source>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    ...
</suite>

Status Codes Data Filters

Exclude Filter

Exclude Filter removes from reports Status Codes results that match specified parameters.

Name: exclude

Resource name: status-codes

Parameters
Parameter Value Description Mandatory
url String url Exact url to be removed from results. At least one of parameter is required.
pattern String regex pattern Regex pattern that urls should match to be removed from results.

If both parameters are provided then result is removed when it matches at least one of the parameters.

Example Usage

In this sample match results with url http://www.cognifide.com/_cog_opt_js_f359581ea4bd3379b4c25591838a5dd8.js or url that matches pattern ^.*js$ will be ignored (not included in report).

<?xml version="1.0" encoding="UTF-8"?>
<suite name="test-suite" company="Cognifide" project="project">
    <test name="exclude-test" useProxy="rest">
        <collect>
            ...
            <open/>
            ...
            <status-codes/>
            ...
        </collect>
        <compare>
            ...
            <status-codes filterRange="200,999">
                <exclude url="http://www.cognifide.com/_cog_opt_js_f359581ea4bd3379b4c25591838a5dd8.js" pattern="^.*js$"/>
            </status-codes>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    <reports>
        ...
    </reports>
</suite>

There can be more than one exclude tags in status-codes comparator. They are processed in turns. Example below is equivalent to defined above:

<status-codes>
    <exclude url="http://www.cognifide.com/_cog_opt_js_f359581ea4bd3379b4c25591838a5dd8.js"/>
    <exclude pattern="^.*js$"/>
</status-codes>

In this case both results with url http://www.cognifide.com/_cog_opt_js_f359581ea4bd3379b4c25591838a5dd8.js and urls that match pattern ^.*js$ (ending with js) will not be displayed on reports.

Exclude and include modifiers can be both applied to status-codes comparator. They are processed in turns. Example:

<status-codes>
    <include pattern="^.*js$"/>
    <exclude url="http://www.cognifide.com/_cog_opt_js_f359581ea4bd3379b4c25591838a5dd8.js"/>
</status-codes>

In this case, at first all urls that do not match ^.*js$ pattern are removed. Then url http://www.cognifide.com/_cog_opt_js_f359581ea4bd3379b4c25591838a5dd8.js is removed. Therefore only urls ending with js except http://www.cognifide.com/_cog_opt_js_f359581ea4bd3379b4c25591838a5dd8.js will be included in reports.

Include Filter

Include Filter removes from reports Status Codes results that do not match specified parameters.

Name: include

Resource name: status-codes

Parameters
Parameter Value Description Mandatory
url String url Exact url to be included in reports. Results that do not match will be removed. At least one of parameter is required.
pattern String regex pattern Regex pattern that urls should match to be included in reports. Results that do not match will be removed.

If both parameters are provided then result is only included in the report when it matches both of the parameters.

Example Usage

In example below only result with url http://www.cognifide.com/_cog_opt_js_f359581ea4bd3379b4c25591838a5dd8.js will be included in report.

<?xml version="1.0" encoding="UTF-8"?>
<suite name="test-suite" company="Cognifide" project="project" environment="win7-ff16">
    <test name="include-test" useProxy="rest">
        <collect>
            ...
            <open/>
            ...
            <status-codes/>
            ...
        </collect>
        <compare>
            ...
            <status-codes filterRange="200,999">
                <include url="http://www.cognifide.com/_cog_opt_js_f359581ea4bd3379b4c25591838a5dd8.js"/>
            </status-codes>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    <reports>
        ...
    </reports>
</suite>

There can be more than one include tags in status-codes comparator. They are processed in turns. Example:

<status-codes>
    <include pattern="^.*js$"/>
    <include url="http://www.cognifide.com/_cog_opt_js_f359581ea4bd3379b4c25591838a5dd8.js"/>
</status-codes>

In this case only http://www.cognifide.com/_cog_opt_js_f359581ea4bd3379b4c25591838a5dd8.js url will be included on reports: first all results that do not match ^.*js$ pattern (ending with js) are removed. Then within that result all urls different that "http://www.cognifide.com/_cog_opt_js_f359581ea4bd3379b4c25591838a5dd8.js" are removed.

In example above, first <include> can be omitted and result will be the same.

Include and exclude modifiers can be both applied to status-codes comparator. They are processed in turns. Example:

<status-codes>
    <include pattern="^.*js$"/>
    <exclude url="http://www.cognifide.com/_cog_opt_js_f359581ea4bd3379b4c25591838a5dd8.js"/>
</status-codes>

In this case only first all urls that do not match ^.*js$ pattern are removed. Then url http://www.cognifide.com/_cog_opt_js_f359581ea4bd3379b4c25591838a5dd8.js is removed. Therefore only urls ending with js except http://www.cognifide.com/_cog_opt_js_f359581ea4bd3379b4c25591838a5dd8.js will be included in reports.

W3C HTML5 Issues Filter

W3C HTML5 Issues Filter allows to exclude some W3C HTML5 issues from result. Excluded issues will appear at the bottom of issues table and won't be taken into account when calculating status.

Name: w3c-filter

Resource name: source

Comparators: w3c-html5

Parameters

Parameter Value Description Mandatory
message string Exact message text of issue to be filter out. *see notes below At least one of params should be used and all of used params should be not empty.
messagePattern regexp Regular expression that matches message text of issue to be filter out. *see notes below At least one of params should be used and all of used params should be not empty.
line integer Line in source file where issue appear
column integer Column in source file where issue appear

Note:

  • message will be overridden by messagePattern if set.
  • If there are some If some XML-specific charactes (e.g. &) are in parameter's value, then they have to be escaped. Suite should be valid XML document.
Example Usage for w3c-html5 comparator
<?xml version="1.0" encoding="UTF-8"?>
<suite name="test-suite" company="Cognifide" project="project" environment="win7-ff16">
    <test name="remove-nodes-test">
        <collect>
            ...
            <open/>
            ...
            <source/>
            ...
        </collect>
        <compare>
            ...
            <source comparator="w3c-html5" errors-only="false">
                <w3c-filter messagePattern = "The first occurrence of.*" />
                <w3c-filter message="A slash was not immediately followed by “&gt;”."/>
                <w3c-filter message="Element “img” is missing required attribute “src”."/>
                <w3c-filter line="1" column="119"/>
                <w3c-filter line="390" message="End tag for  “html” seen, but there were unclosed elements."/>
            </source>
            ...
        </compare>
        <urls>
            ...
        </urls>
    </test>
    <reports>
        ...
    </reports>
</suite>

Urls

<urls> element lists all urls which will be processed within current test. Contains one or more url elements.

url

A single url which will be processed by particular test.

Parameters
Attribute name Description Mandatory
href Page address (also see note under name attribute) yes
name Identifier for url. It is used to identify data for url. If provided should be unique for each test in test suite. If not provided is set to encoded href value. Should consists only of letters, digits and/or characters: -, -. Note that if href="" with provided url name attribute and suite domain attribute is also valid no
description Additional description for url that will be shown in html report no longer supported
Example Usage
<?xml version="1.0" encoding="UTF-8" ?>
<suite name="test-suite" company="cognifide" project="project">
    <test name="urls-test">
        <collect>
            ...
        </collect>
        <compare>
            ...
        </compare>
        <urls>
            <url href="http://www.example.com"/>
            ...
        </urls>
    </test>
    ...
    <reports>
        ...
    </reports>
</suite>

Suite Report

What is suite report?

Suite Report is testing results' presentation. It's composed of single tests. Each of them contains one or more URLs, on which tests were run.

! Important information
AET reports are tested and written for Google Chrome web browser.

Each test's result will be presented in one of three colors:

  • green - if all group result passed and no risks was detected,
  • yellow - if there is small risk detected,
  • red - if there were some risks detected and result requires inspection

There is also 4th colour, which is not correlated with test's results. It is blue, which appears when user accepts certain pattern.

Report is made up of 3 main parts (see also screenshot below):

  • toolbar,
  • sidepanel (which contains two sub-parts):
    • filtering,
    • navigation-tree,
  • main.

report's naming

With given suite report you can:

  • accept or revert patterns,
  • create notes,
  • filter results,
  • search for specific test/URL,
  • navigate on report with keyboard shortcuts.

For more information about AET reports' features see AET Report Features.

Levels of report

The highest report's level is suite. Every suite contains tests and the certain test contains one or more URLs on which tests are run.

Suite

On this level you can see such information as:

  • all tests which was launched via certain suite,
  • project name,
  • test cases' status,
  • date and time of running the test suite.

Test

If you go to the certain test level, you can obtain information about:

  • test case's name,
  • status' representation of tested URLs,
  • URLs included in the test.

URL with Cases Tabs

On URL level you can learn about:

  • cases on which certain site was tested (represented as tabs on upper part of report),
  • test case's details for given URL.

Test cases

Cookies

Description

Cookie test results can be presented in three diffrent forms which depend on the action parameter defined in test definition. The forms are:

  • list,
  • test,
  • compare.
List
Description

Lists all cookies found on the tested page. This result will always have success status.

cookie list

What vulnerabilities it discovers

You can check all of site's cookies in order to find the invalid one. However, this mode is not intended to discover website issues. This list should be empty when tested page does not intend to use cookies and The EU Cookie Law is respected.

Test
Description

It shows result of checking presence of cookie with defined parameters on the tested page.

Cookie-test successfull

In case of cookie being not found on the page or having an unexpected value the result is marked as risk (red).

Cookie-test failure

What vulnerabilities it discovers

There are a few things you should pay attention to:

  • lack of a cookie that occurred before might be caused by some website error (e.g. bug in system functionality),
  • lack of a cookie might result in further system erros (e.g. losing some user specific data),
  • lack of an important cookie (e.g. cookie with user localization data) may cause a page to be dispalyed improperly.
Compare
Description

Cookies found on the tested page are compared to the others, which were saved in the pattern (if there is no pattern, then cookies collected during the first page entry are set as the pattern). Differences are searched only for cookies' names. Result will be successful if all found cookies' names are identical to those in the pattern.

Cookie-compare success

Otherwise the result in the report will be marked as at risk (red). Differences will be presented in the form (see "1" on screenshot below) and there will be "accept test case" action available (see "2" on screenshot below).

Cookie-compare failure

What vulnerabilities it discovers
  • lack of a cookie that occurred before might be caused by some website error (e.g. bug in system functionality),
  • lack of a cookie might result in further system erros (e.g. losing some user specific data),
  • an additional cookie may be generated by some unwanted content on a page (e.g. some 3rd party software add own cookies),
  • when a page does not intend to use cookies and The EU Cookie Law is respected, lists of additional and detected cookies should always be empty.

JS Errors

Description

This case displays success status when there were no JS errors found.

! Important information
All errors filtered with [[JS Errors Data Filter

JS errors success

Otherwise the report is marked as risk (red) when at least one error has been found.

JS errors failure

What vulnerabilities it discovers
  • JS Errors can cause improper behaviour of a page (e.g. dynamic components may not work properly in some (or even all) browsers,
  • JS Error can also occur when good practices are not followed in the javascript code.

Screen - layout

Description

For layout tests the results are presented as compared screenshots

Layout failure

  1. Test case's name (red font means failure).
  2. "Accept test case" button (available only when differences have been detected).
  3. "Show mask" switch - when the mask is on, differences are marked in a red colour over the collected screenshot, otherwise a raw screenshot is presented.
  4. Pattern - a screen which the "view" is compared to (if there is no pattern, the first collected screenshot is saved as the pattern).
  5. View - a screen that was taken during the test and it is compared to the pattern.
  6. Example of difference area.
  7. Date of obtaining current pattern.
Yellow color

Yellow color in mask is introduced when there is a change in test definition. The yellow color shows that we have different resolutions for pattern and collected view.

In this example pattern has resolution 800x600, but then test definition for view has been increased using resolution modifier:

<resolution width="1024" height="768" />

Yellow mask

Success

Test case's result is marked as successful when there is no difference between view and pattern (see screenshot below).

Layout success

What vulnerabilities it discovers
  • Differences found in page screenshots may indicate undesired changes in the page layout (css, html structure) e.g. when a new functionality was implemented in a system it may have an impact on another system component(s). This may show itself as a changed page layout.
  • Content changes can be divided into two groups: wanted (are intended) and unwanted (a result of a mistake or an error). An example of a change that is not a defect (wanted) is: the carousel component with the latest news items displayed or the twitter component displaying latest tweets. In order to avoid detecting these sorts of changes in these dynamic components, the user can use the Hide Modifier feature in the suite definition. Another example of the ‘wanted’ dynamic content is a cookies policy popup that may be hidden using the Cookie Modifier.

Source

Description

Source test cases' results display compared sources. (see screenshot below).

Source failure

  1. Test case's name (red font means failure),
  2. "Accept test case" button (available only when differences have been detected),
  3. "Show full source" switch - when the switch is off only differences are shown on the screen, otherwise full source is shown,
  4. Pattern - source file to which collected source is compared. When there is no pattern, first collected source is saved as pattern automatically,
  5. Source - source file which is compared with pattern,
  6. Sample block with visible differences (e.g. changed characters).

Test case's result is marked as successful when there is no difference between source and pattern (see screenshot below).

Source success

What vulnerabilities it discovers
  • Differences found by source comparison may indicate undesired changes in a page layout (html structure) and content, e.g. when a new functionality is implemented in a system it might have an impact on other system component(s). This may occur as a changed page source.
  • Content changes can be divided into two groups: wanted (intended) and unwanted (result of a mistake or an error). In order to filter out wanted changes and detect changes that are a result of a mistake or an error, the user can use one of following filters in the suite definition:

Status codes

Description

In this test case you can check response codes from certain URLs. There is possibility of excluding individual codes, URLs and patterns (they are ignored by that test) as well as including them (only them will be tested by that test). For more information about excluding/including see Status Codes Data Filters.

If any code is filtered by certain test, the result is failure (see screenshot below).

Status codes failure

Otherwise test's result is successful (like on the screenshot below).

Status codes success

Additionally, if excluding filter is used, excluded codes are presented in additional section.

What vulnerabilities it discovers
  • All status codes with a number higher than 400 are potential errors and indicate that the resource that is used by a page is unreachable (e.g. a page logo image, a page layout css file)
  • Status code errors affect SEO (e.g. google page ranking is lowered for pages with 404 status codes).

W3C (HTML5)

Description
! Important information
W3C validator is compatible with HTML5 standard.
W3C report results display page source W3C validation output. If no W3C errors were found, result is marked as success - green (see screenshot bellow).

W3C success

There is possibility to see warning (yellow), if W3C warnings were present and parameter ignore-warnings was set to false (as on screenshot bellow).

W3C warning

If at least one W3C validation error was found, report is marked as risk - red (see screenshot bellow).

W3C failure

Result shows total count of validation errors and validation warnings.

What vulnerabilities it discovers
  • The W3C validation is important from the SEO point of view. Pages that do not comply to W3C standards are ranked low in Google PageRank and other rankings.
  • Detected W3C errors may indicate serious html structure bugs (e.g. tags that haven't been closed) or content issues (e.g. invalid tags parameters: <a> without href).
  • Maintenance of pages that follow W3C standards is much easier to carry out because pages that keep these standards are much less prone to be displayed differently in different browsers or devices.
  • The W3C validation can also reveal page encoding and special characters displaying issues.

Accessibility

Description
! Important information
This feature is currently in BETA version.

This test case's result displays validation output of page accessibility analysis. Result shows total count of errors, warnings and notices about possible violations. Output presented on this report comes from html CodeSniffer library.

Result is successful if there are no errors, warnings or notices (see screenshot below).

Accessibility success

If there is no error, but several warnings or notices appear, the result is marked as warning (see screenshot below).

Accessibility warning

If any error occurs, the result is marked as risk (see screenshot below).

Accessibility failure

What vulnerabilities it discovers
  • When page fails accessibility tests it could mean that it couldn't access information, e.g. there are images on page without description or alt attribute, anchors elements don't have link content, page styling and design is not clear enough for people with disabilities.
  • Lack of accessibility could be against the law in some countries.

Client side performance

Description
! Important information
This feature is currently in BETA version.

Client side performance report results display validation output of performance analysis. Result shows overall score and the list of rules, which are graded individually. Each rule contains a description and optionally the list of components associated with the rule. Results presented on this report come from YSlow tool.

Client Side Performance

  1. Test case name with status color.
  2. Overall performance score (computed from subscores).
  3. List of subscores (Each subscore is assigned a letter grade A through F, with A being the highest grade).
  4. Description of subscore (only for score with grade worse than A).

If overall score is A, the report is marked as success.

If overall score is B to E, the report is marked as warning.

If overall score is F, the report is marked as risk.

What vulnerabilities it discovers
  • Poor client side performance has negative impact on user experience.
  • Pages with grade F are slow and probably user will not want to use them. They are especially difficult to load on mobile devices.
  • Client side performance is taken into account by most of search engines. Good performance means better ranking.

Features

Accepting/reverting patterns

There is possibility to accept failed test on each level (suite, test and URL) for the test cases in which the pattern is used (for now acceptable cases are: cookie compare, layout for screen and source "Source"). It is possible to revert certain acceptation, but for now only if changes are not saved. Accepting on suite level makes all acceptable test accepted, on test level it provides acceptation of each URL in certain test case. The lowest level is accepting certain URLs.

Accepting pattern example:

Test's acceptation

Reverting pattern example:

Test's reverting

Notes creation

There is possibility to add notes to each level of the report. Notes are useful to give some information about test case e.g. why failed test was accepted.

Note example

Filtering test results

Every test case has one of the following states:

  1. passed — if the comparator doesn't find any change, i.e. validation passes,
  2. passed with warnings — if there are some warnings, but they are not very important,
  3. failed — if the comparator detects some changes or some validation rules are broken,
  4. accepted — if failed test was accepted. The state of the test case is propagated to the URL then to the test and to the test suite. It is possible to accept all test cases for a given URL or in a current test suite.

Tests and URLs may be filtered by:

  • text included in the test name or URL,
  • test status.

Filtering by status works as an alternative: if one selects passed and failed tests both should be visible.

Filter example

Searching for specific test/URL

It is possible to search tests and URLs by the query. Searched fields are the URL and test name.

Search example

Navigation via keyboard shortcuts

  • press q to expand/collapse all items
  • press e to expand/collapse all error items
  • use [ / ] to navigate between test's urls
  • press m to show/hide layout mask (when available)
  • press / to navigate between url's tabs

How It Works

AET is a distributed system that consists of a set of modules deployed on Apache Karaf which communicate with one another using JMS Server - Active MQ. The data collected and results of test processing are saved into the Datastorage (its current implementation is MongoDB). Additionally, AET makes use of Browsermob as a requests proxy server and Apache Server as a host server for Reports Web Application.

The diagram below depicts the AET system and communication between AET system components:

aet-components-diagram

Third-party software used by system

AET makes use of the following third party software as parts of the system:

Software Used version Function
Apache ActiveMQ 5.13.1 JMS Sever used for communication between system components
Apache Karaf 2.3.9 with 4.2.1 Apache Felix Framework. OSGi container for AET bundles and REST API
Apache Server 2.2.15 Http server used to host [[Reports Web Application
Browsermob 2.0.0 Proxy server
Firefox 38.6.0 ESR (en-US) Browser with Selenium (2.50.1)
MongoDB 3.2.3 System database

System Components

The AET System consists of 7 core units:

  • The Client (AET Maven Plugin)
  • The Runner cluster
  • The Worker cluster
  • The JMS Server
  • The Database
  • The REST API
  • Reports web application

AET System architecture

aet-architecture

Client

The Client component has the following functions

  • sending request to the AET System.
  • checking the suite processing status.
  • downloading the Report after the Test Suite run is finished.

Test Executor

The Test Executor is an entry point of the test suite processing. It exposes endpoints which client applications can use to run the test suite and check the processing status by sending the simple HTTP requests.

Runner

The Runner is the heart of the system. It is responsible for consuming Client's request and dispatching it to Workers. It works similar to the Map-Reduce algorithm. During the execution of the suite, the Runner checks if the next phase can begin and when all the phases are finished the Runner informs the client about it.

Worker

The Worker is a single processing unit that can perform a specific task e.g. collect a screenshot using the Firefox browser in the Windows 7 environment, collect a page source, compare two screenshots, check if the source of a page is W3C-complaint and many others.

JMS Server

The JMS Server is a communication hub for the whole system. Workers, runners and the client communicate with one another using JMS messages.

Database

The Database serves as the system storage. It stores all the results, reports and patterns.

REST API

The REST API for the stored data; the user can download the Report, collected sources, view screenshots and comparison results via the REST API.

Third-party software used by system

AET uses the following third party software as parts of the system:

Software Used version Function
Apache Karaf 2.3.9 with 4.2.1 Apache Felix Framework. OSGi container for AET bundles and REST API.
Apache ActiveMQ 5.13.1 JMS Sever used for communication between system components.
MongoDB 3.2.3 System database.
Browsermob 2.0.0 Proxy server.
Firefox 38.6.0 ESR (en-US) Browser with Selenium (2.50.1).

Client Application

The AET client application comes with a sort of a plugin to the Maven build automation tool -- aet-maven-plugin. This plugin connects to the AET application in order to run the specified test suite.

Usage

In order to run tests you must create a Maven project and include aet-maven-plugin in the pom.xml file in the following way:

<plugin>
    <groupId>com.cognifide.aet</groupId>
    <artifactId>aet-maven-plugin</artifactId>
    <version>${aet.version}</version>
</plugin>

The plugin version is here specified as the Maven property aet.version. This allows to define the AET plugin version from the command line using the -Daet.version=x.y.z option, where x.y.z is the version number.

aet-maven-plugin defines the aet:run Maven goal which needs to be executed in order to run the test suite.

So if you want to run AET tests you must execute the following command in the directory where the pom.xml file has been defined:

mvn aet:run -DtestSuite=FULL_PATH_TO_TEST_SUITE
Parameters

aet-maven-plugin has a few parameters that configure its behaviour. The testSuite parameter already mentioned defines the path to the xml suite configuration file. All the parameters are described below:

Parameter Description Default Value Mandatory
testSuite The full path to the suite definition file (at least a file name with an extension, e.g. testSuite.xml). suite.xml no
endpointDomain the URL to the main AET domain http://localhost:8181 no
domain Overrides the domain parameter value from the test suite definition. - no
timeout Milliseconds to detect the timeout since the last status received from AET. This is useful to abort the test run if there is no activity for a long time. 300000 (5 minutes) no
pattern Id of suite that will be used as patterns source. Identical structure of pattern and current suites is assumed. - no
xUnit The flag that indicates whether the xUnit report should be generated and downloaded or not. false no
Test results

The result of successful command line execution of the AET test suite is the redirect.html file and, if the xUnit parameter is set to true (the suite is executed with the -DxUnit=true flag), also the xunit-report.xml file. Both files are generated in the target folder in the directory where the pom.xml file has been defined.

Examples

There are a few sample commands with a different parameter set below.

By default, aet-maven-plugin connects to the AET application using the port 8181 of localhost. If your AET application has been deployed to some other machine e.g. under the URL http://aet.example.com, you can tell the plugin to connect to that machine in the following way:

mvn aet:run -DtestSuite=suite.xml -DendpointDomain=http://aet.example.com

If all URLs in your test suite point to a single domain, you can specify it so it is no longer needed to do it again in the suite file. Let's assume you'd like to test some subpages of the English version of Wikipedia. Then you can specify the target domain in the following way:

mvn aet:run -DtestSuite=suite.xml -Ddomain=https://en.wikipedia.org

If you want the test run to fail if its run takes too much time, you can specify the timeout (in milliseconds) in the following way:

mvn aet:run -DtestSuite=suite.xml -Dtimeout=2000

If you want to generate the xUnit report to have test results displayed in Jenkins, you can set it in the following way:

mvn aet:run -DtestSuite=suite.xml -DxUnit=true

Test Executor

The Test Executor module is an entry point of the test suite processing. It exposes endpoints which client applications can use to run the test suite and check the processing status by sending the simple HTTP requests.

The heart of this module is the SuiteExecutor OSGi service. This service is responsible for starting the test suite execution and storing the processing status. It communicates directly with the AET Runner via ActiveMQ.

Endpoints

The Test Executor module exposes two endpoints. First is responsible for running provided test suite and the second provides the suite processing status.

Base path for both endpoints:

http://<Domain_or_IP_Address>:<PORT>

Run suite
Request
  • URL: /suite
  • HTTP Method: POST
  • Parameters:
    • suite - xml file containing the suite definition,
    • domain - overrides domain specified in the suite xml file.
  • Description: Executes test suite provided as a parameter. The request's content type has to be multipart/form-data.
Response

This endpoint returns JSON object with following fields:

Field Description
correlationId Correlation ID of the suite run, used to check the processing status.
statusUrl URL under which the processing status is available.
htmlReportUrl Link to HTML report generated by the suite run.
xunitReportUrl Link to xUnit report generated by the suite run.
errorMessage Contains an error message. Only this field will be present if suite start fails.
Get suite processing status
Request
  • URL: /suitestatus/<correlationId>
  • HTTP Method: GET
  • Parameters:
    • correlationId - correlation ID of the suite run, which is returned in response to the suite run request.
  • Description: Returns processing status of the suite run identified by correlationId. Please note that the Run suite request returns full URL from which the processing status can be obtained.
Response

This endpoint returns JSON object with following fields:

Field Description
status Processing status. Available values: PROGRESS, ERROR, FATAL_ERROR, FINISHED, UNKNOWN
message Detailed message associated with status (might be empty).

SuiteExecutor service

This service processes the requests sent to endpoints. It parses provided suite file, locks the test suite and sends it to the Runner. It starts the threads that receive progress messages from Runner and stores the statuses in cache.

The service returns processing status when requested. It returns one status at a time and removes it from cache, so the status message can be obtained only once. When there are no status requests made for a specified amount of time, then the statuses for the specific suite run are removed from the cache permanently.

The ActiveMQ message receive timeout can be configured in the OSGi Console, under the AET Suite Executor entry. It is specified in milliseconds.

Runner

Runner is the heart of the system. It is responsible for consuming client's request and dispatching it to Workers. It works similar to the Map-Reduce algorithm. During the execution of the suite, the Runner checks if the next phase can begin and when all the phases are finished the Runner informs the client about it.

Runner starts whole suite processing and is responsible for merging all results. See following diagram that shows sequence of suite processing:

aet-test-lifecycle

Worker

The Worker is a single processing unit that can perform a specific task e.g. collect a screenshot using the Firefox browser, collect a page source, compare two screenshots, check if the source of a page is W3C-compliant and many others. Worker uses jobs to perform the tests. This module communicates with the browser (Firefox).

The Worker is responsible for executing a single piece of work and returning it to the Runner. See the following diagram that shows the sequence of suite processing:

aet-test-lifecycle

REST API

Representational State Transfer API for accessing and modifying data stored in AET Database. REST API is part of AET System and is the interface between system database, user and application.

Its methods are used by AET Maven Plugin to download reports, HTML Report uses it to load images and to perform rebase action.

Rebase (switching artifacts id of pattern(s)) and adding comments should be done on client side. REST API only consumes whole json representation of suite.

REST API HTTP methods

Base api path:

http://<Domain_or_IP_Address>:<PORT>/api

Get artifact by artifact Id

Get metadata by correlationId

Get metadata by suite name

Update suite metadata
  • URL: /metadata
  • HTTP Method: POST
  • Parameters: raw JSON in POST body
  • Example: http://aet.example.com/api/metadata [raw json in post body]
  • Description: This method increments version number before saving to DB and returns updated suite object in json format. Returns status 409 if given suite is locked.

Get lock for suite

Try to set lock
  • URL: /lock
  • HTTP Method: POST
  • Parameters: value - additional info for lock (currently it's correlationId only) "company-project-name" as last part of path
  • Example: http://aet.example.com/api/lock/cognifide-example-mysimplesuite [value=cognifide-example-mysimplesuite-12312454]
  • Description: This methods sets lock only if there is no lock already set for given suite. Returns status 409 if given suite is already locked.

Update heart beat
  • URL: /lock
  • HTTP Method: PUT
  • Parameters: value - additional info for lock (currently it's correlationId only) "company-project-name" as last part of path
  • Example: http://aet.example.com/api/lock/cognifide-example-mysimplesuite [value=cognifide-example-mysimplesuite-12312454]
  • Description: This method extends the duration of a lock for given suite.

Gets list of all suites in system
  • URL: /config/list
  • HTTP Method: GET
  • Example: http://aet.example.com/api/config/list
  • Description: Returns all suites for all projects in all companies as html list of links to reports and metadata (this method will change or will be removed in near future- for now it stays only for devs and testing purposes).

Get all locked suites

Get communication settings

Cleaner

The Cleaner is a mechanism that removes obsolete data from the AET Database.

The Cleaner is a scheduled task (using the Quartz Scheduler library with a Cron expression). There may be multiple Cleaner instances running in the system, however it is recommended that they should not run over the same span of time (scheduled hours should be carefully picked).

Configuration

There are two parameters that define if the Suite in the AET Database is obsolete:

  • version,
  • creation timestamp.

The Version of the suite is incremented each time the suite changes (e.g. during the next run of all suite tests or simply during suite rebasing/commenting). In case when the suite is run with all tests, correlationId of the suite changes. During rebasing/commenting, only the version is incremented, correlationId remains unchanged.

The Creation timestamp is the time when the suite was run or when it was changed last time.

Those parameters can be set in the Cleaner configuration:

  • Last N versions to keep - defines the number of artifact versions that will be left after the cleaning operation. If left empty, only one version will be kept after the cleaning operation.
  • Remove artifacts older than X days - defines how old files should be removed (older than X days). Works as a conjunction with last versions to be kept.

Workflow

The Cleaner makes use of Apache Camel as an execution processor. The following diagram shows a sample Cleaner execution:

aet-cleaner-workflow

Examples

Let's assume we have the following suite versions in the database before running the Cleaner.

aet-cleaner-example-initial-state

#1

After running the Cleaner with the following parameters:

  • remove all suites but for the last 3 versions,
  • remove all suites created before 5 days since now (assume now is 08.04.2016, so 5 days since now is 03.04.2016).

The following suites will be removed (marked red).

aet-cleaner-remove-example-1

#2

After running the Cleaner with the following parameters:

  • remove all suites but for the last 2 versions,
  • remove all suites older than 6 days (since 08.04.2016, which is 02.04.2016).

the following suites will be removed (marked red).

aet-cleaner-remove-example-2

#3

After running the Cleaner with the following parameters:

  • remove all suites but for the last 2 versions,
  • no date specified.

The following suites will be removed (marked red).

aet-cleaner-remove-example-1

Test Processing

Each AET test processing consists of two phases:

  • collection,
  • comparison,

After report is generated, client is notified about the finished test run.

The following diagram shows the life cycle of single test:

aet-test-lifecycle

Collection

This is the first phase during which all specified data will be collected (e.g. screenshots, page source, js errors). All collection results are saved in database after successful collection.

Comparison

The second phase is operation on collected data. In some cases collected data is compared to patterns, in other special validation is performed (e.g. w3c). The second phase starts before collection finishes - just at the moment when required artefacts are collected and ready to compare (e.g. to compare two screenshots, system does not have to wait until source of page is collected).

The following diagram shows the life cycle of test suite:

aet-test-suite-lifecycle

Lock Mechanism

Lock feature was implemented to block concurent modification of suite. This prevents overriding user changes (eg rebase, comments) by test suite run.

When suite is locked there is no way to update it by any operation in REST API.

Test suite run flow

When client (e.g. aet-maven-plugin) starts test suite then it tries to set lock by sending request to REST API.

  • If given suite is already in locked state, REST API returns status 409 and then client is throwing exception and finishes execution (test suite doesn't get into runner in Queue).
  • If suite isn't locked, lock is set and 'lock-heart-beat' is started. On each heartbeat lock duration is extended. Heartbeat is working until client finishes its execution.

Database Structure

Overview

Each AET project has its own database. The project database consists of 3 collections:

  • Metadata,
  • Artifacts (files + chunks GridFS collections).

Metadata

The metadata collection holds the whole suite run with all necessary metadata e.g.:

{
    "suite": {
        "correlationId": "cognifide-example-1234567890",
        "project": "example",
        "name": "integration",
        "version": 2,
        "tests": [
            {
                "name": "example-desktop",
                "comment": "Some test-level comment",
                "urls": [
                    {
                        "name": "unique-url-name",
                        "caseUrl": "/authors.html",
                        "canonicalUrl": "https://cognifide.com/authors.html",
                        "domain": "https://cognifide.com",
                        "comment": "Some url-level comment",
                        "useProxy": "rest",
                        "steps": [
                            {
                                "header": {
                                    "parameters": {
                                        "key": "Authorization",
                                        "value": "Basic emVuT2FyZXVuOnozbkdAckQZbiE="
                                    }
                                }
                            },
                            {
                                "open": { }
                            },
                            {
                                "screen": {
                                    "name": "desktop",
                                    "parameters": {
                                        "width": 1280,
                                        "height": 1024
                                    },
                                    "pattern": "568b54a4e63e740bfc2210e5",
                                    "result": {
                                        "artifact": "bb8b54a4e63e740bfc2210e8",
                                        "status": "OK"
                                    },
                                    "comparators": [
                                        "layout:" {
                                            "result": {
                                                "artifact": "bb8b54a4e63e740bfc2210x5",
                                                "status": {
                                                    "status": "SUCCESS",
                                                    currentCreateDate: "Mar 2, 2016 2:30:36 PM",
                                                    patternCreateDate: "Mar 2, 2016 2:30:36 PM"
                                                }
                                            }
                                        }
                                    ]
                                }
                            },
                            {
                                "screen": {
                                    "name": "desktop",
                                    "parameters": {
                                        "width": 768,
                                        "height": 1024
                                    },
                                    "pattern": "568b54a4e63e740bfc2210e5",
                                    "result": {
                                        "artifact": "aa8b54a4e63e740bfc2210e5",
                                        "status": "OK"
                                    },
                                    "comparators": [
                                        "layout:" {
                                            "result": {
                                                "artifact": "bb8b54a4e63e740bfc2210e5",
                                                "status": {
                                                    "status": "SUCCESS",
                                                    currentCreateDate: "Mar 2, 2016 2:30:36 PM",
                                                    patternCreateDate: "Mar 2, 2016 2:30:36 PM"
                                                }
                                            }
                                        }
                                    ]
                                }
                            },
                            {
                                "screen": {
                                    "name": "mobile",
                                    "parameters": {
                                        "width": 320,
                                        "height": 480
                                    },
                                    "pattern": "568b54a4e63e740bfc2210e6",
                                    "result": {
                                        "artifact": "aa8b54a4e63e740bfc2210e6",
                                        "status": "OK"
                                    },
                                    "comparators": [
                                        "layout:" {
                                            "result": {
                                                "artifact": "bb8b54a4e63e740bfc2210e5",
                                                "status": {
                                                    "status": "SUCCESS",
                                                    currentCreateDate: "Mar 2, 2016 2:30:36 PM",
                                                    patternCreateDate: "Mar 2, 2016 2:30:36 PM"
                                                }
                                            }
                                        }
                                    ]
                                }
                            },
                            {
                                "status-codes": {
                                    "comparators": [
                                        "status-codes": {
                                            "parameters": {
                                                "filterRange": "400,600"
                                            },
                                            "result": {
                                                "artifact": "bb8b54axxxxe740bfc2210e5",
                                                "status": {
                                                    "status": "SUCCESS"
                                                }
                                            }
                                        }
                                    ]
                                }
                            },
                            {
                                "js-errors": {
                                    "comparators": [
                                        "js-errors": {
                                            "dataFilters": [
                                                "js-errors-filter": {
                                                    "source": "http://w.iplsc.com/external/jquery/jquery-1.8.3.js",
                                                    "line": "2"
                                                },
                                                "result": {
                                                    "artifact": "aaab54axxxxe740bfc2210e5",
                                                    "status": {
                                                        "status": "SUCCESS"
                                                    }
                                                }
                                            ]
                                        }
                                    ]
                                }
                            }
                        ]
                    }
                ]
            }
        ]
    }
}

Each step defined in the original suite is stored in this collection with all the information necessary to run it.

aet-data-model

Metadata is a simple MongoDB collection. It contains keys (objectId) of GridFS artifacts stored in the Artifacts collection.

aet-mongo-collections

Metadata is persisted after a full suite run. At the beginning of processing, pattern keys are fetched from the last run if it was performed.

aet-suite-storage

Artifacts

Artifacts is a GridFS collection (it consists of two collections: .files and .chunks). It holds binary artifacts (e.g. screenshots, source etc.). Each file has its ObjectId which is a reference to it. This collection has no knowledge of its context, artifacts are not marked as pattern/result etc.

Logs

Overview

AET log files can be found on Apache Karaf directory, in C:\content\karaf\data\log folder. Logs are split into four files:

karaf.log

Dedicated for logging Apache Karaf activities such as starting Karaf, starting AET bundles, configurations binding, etc.

runner.log

Dedicated for logging AET runner activities, such as running new test, changes in test suite run lifecycle, communication between runner and workers, JMS messages management, e.t.c.

worker.log

Dedicated for logging AET workers activities, such as collecting, comparing, modifying data, saving data do Mongo DB, etc.

cleaner.log

Dedicated for logging Cleaner activities (removing old Artifacts from Mongo DB, etc.).

Log structue

Each log record has common structure:

    1                       2       3                           4                               5       6
2015-03-19 15:22:26,307 | INFO  | worker                   | CollectorMessageListenerImpl       86 | CollectorJobData [Collector4] message arrived with 1 urls. CorrelationId: cognifide-project-test-suite-1426774946010 RequestMessageId: ID:FLANNEL-56766-1426771932253-1:1:1:1:2
2015-03-19 15:22:28,650 | INFO  | worker                   | CollectorDispatcherImpl            41 | Start collection from http://www.cognifide.com, with 4 steps to perform. Company: cognifide Project: project TestSuite: test-suite Test: test1
2015-03-19 15:22:28,651 | DEBUG | worker                   | CollectorDispatcherImpl            53 | Performing collection step 1/4: open named open with parameters: {} from http://www.cognifide.com. Company: cognifide Project: project TestSuite: test-suite Test: test1
2015-03-19 15:22:29,351 | DEBUG | worker                   | CollectorDispatcherImpl            53 | Performing collection step 2/4: sleep named sleep with parameters: {duration=1500} from http://www.cognifide.com. Company: cognifide Project: project TestSuite: test-suite Test: test1
2015-03-19 15:22:29,351 | DEBUG | job-common               | SleepModifier                      27 | Sleeping for 1500 milliseconds
2015-03-19 15:22:30,851 | DEBUG | worker                   | CollectorDispatcherImpl            53 | Performing collection step 3/4: screen named screen with parameters: {} from http://www.cognifide.com. Company: cognifide Project: project TestSuite: test-suite Test: test1
2015-03-19 15:22:31,804 | DEBUG | datastorage-gridfs-impl  | GridFsStorage                     600 | Saving node with key: PatternMetadata{company=cognifide, project=project, testSuiteName=test-suite, environment=win7-ff16, artifactType=PATTERNS, domain=null, version=null} and file name: result.json
2015-03-19 15:22:31,813 | INFO  | datastorage-gridfs-impl  | GridFsHelper                      428 | Index created; Database: cognifide; Collection: project.files
2015-03-19 15:22:31,814 | DEBUG | datastorage-gridfs-impl  | GridFsStorage                     600 | Saving node with key: PatternMetadata{company=cognifide, project=project, testSuiteName=test-suite, environment=win7-ff16, artifactType=PATTERNS, domain=null, version=null} and file name: screenshot.png
...

where:

  1. Log record date and hour,
  2. Log level (INFO, DEBUG or ERROR),
  3. Name of the system module where information is logged,
  4. Name of the class,
  5. Line of code,
  6. Log message.

Logs configuration

AET logging can be configured in org.ops4j.pax.logging.cfg file in C:\content\karaf\data\etc folder.

This configuration file specifies among others log files destination folder, log level and pattern, log file maximum size.

What's new

AET 2.0 brings new reporting capabilities and improved performance. We have decided to label the new features as BETA and improve them based your feedback as it means a lot to us. Stay tuned!

Architecture performance improvements

We keep evolving the AET architecture and optimizing reporting performance. We have introduced new web application reports, which are now generated on the client-side. Also, we have optimized database model queries and decreased number of calls by a factor of 10. If you’ve ever been working on a release and discovered that the AET database has become overloaded, we have removed data storage duplications so you don’t need to worry any longer!

New reporting interface BETA

The reporting interface has been turned into a modern and responsive client-side application. Now it’s easy to search and filter results from your test case. If you are tired of re-running your tests after accepting patterns don’t worry, now all changes are applied on the fly. Additionally you can share a link to a test result that you are concerned about and share with your team just by copying the test URL and pasting to JIRA.

Accessibility report BETA

AET 2.0 introduces an accessibility report that displays validation output of page accessibility analysis using the HTML_CodeSniffer library. Results show the total count of errors, warnings and notice type violations.

Client-side performance BETA

Now it’s possible to test client-side performance in an agile and incremental fashion. Brand new reports show overall scores along with a list of rules with individual grades. The performance analysis is based on the YSlow tool.

FAQ

This section contains answers for frequently asked questions. If you can't find an answer to your question here please use the Issues Tool to raise a question.

1. Setup and first steps

1.1. What do I need to start using AET?

You need Maven and Java installed to run AET and Chrome browser to see reports if you have AET environment already set up. See more information in Running Suite section. To setup AET you need VirtualBox 5.1.14 to run AET VM. See more details in Basic Setup section.

1.2. I have an AET environment, how can I run tests?

You need Maven and Java installed to run AET and Chrome browser to see reports. See more information in Running Suite section. To start AET suite you need 2 XML files:

To run suite simply execute this command:

mvn aet:run

from the directory where you have two above XML files.

Next, you will see processing progress. After a SUCCESSFUL BUILD explore target directory and open redirect.html in Chrome browser file to see the report.

1.3. How can I integrate AET with continuous integration tools?

AET tests are triggered by AET Maven Client Application. Thanks to this you may simply run mvn aet:run from your favourite CI tool (e.g. Jenkins or Bamboo).

1.4. I'm running AET for the first time. How will the tool know the patterns?

When running AET for the first time AET has no patterns. The first collected screenshots will be treated as patterns, so the first run will detect no changes. The same is true when a new test or url is added to already existing suite - new records will have patterns collected during the first suite run.


2. Environment and software

2.1. Which browser is used by AET?

AET currently uses Firefox 38.6.0 ESR as default browser. Information about current versions of components used by AET can be found in Third-party software used by system section.

2.2. Does AET use database for storing data?

Yes, AET uses MongoDB where all data collected during AET suite processing is stored.

2.3. I have a problem with missing fonts (my page is not English). What should I do?

You can add custom fonts to AET virtual machine. To do so, place desired fonts inside usr/share/fonts or /usr/share/fonts/truetype directories, AET's FireFox should use them. Other idea is to install fonts with e.g.: yum groupinstall chinese-support yum groupinstall arabic-support See more details in answers for this AET question.


3. User interface and reports

3.1 What browser should I use to browse AET reports?

AET reports are dedicated and tested with Chrome browser, however they should also work fine with other modern browsers like FireFox or Edge.

3.2 I would like to compare pages between two environments/domains. How can I do that with the AET Tool?

The AET System enables comparison of the same page (set of pages) between different environments (domains). To do so, simply change domain parameter (either by change in suite definition or using aet run command) when running following tests. All data collected during those suite runs will be compared with the same patterns (which are independent of domain attribute).

3.3 How can I access pages that require authentication to enter?

There are two possible solutions. For the Basic Authentication you may use Header Modifier with Authorization key set:

<header key="Authorization" value="Basic emVuT2FyZXVuOnozbkdAckQZbiE=" />

The string in value is base64 encoded username:password string. The other way is to use Login Modifier that can pass simple login form.

3.4 How can I simulate another user agent?

Use Header Modifier to achieve that. Just add header modifier with key 'User-Agent' and requested value.

3.5 What can I do with elements that render differently each time a page is opened and it occurs in changes detected each time?

Use Hide Modifier to hide those elements with css or xpath selectors.

3.6 I want to check how my page behaves on mobile devices, how can I do that?

AET is not integrated with mobile devices. However, you may simulate mobile resolution and check if your page changes its rendering breakpoints for different resolutions. Use Resolution Modifier to simulate different resolutions.


4. Best practices

4.1 I want to check how my page looks on several devices - what is the best way do configure a suite?

You may configure several Resolution Modifiers and Screen Collectors within single <collect> phase. Please remember that it is a good practice to give tested page the time to adjust after changing the resolution and before collecting a screenshot. Example test configuration may look like this:

<collect>
	<open/>
	<wait-for-page-loaded />
	<resolution width="1280" height="1024"/>
	<sleep duration="1000"/>
	<screen  name="desktop"/>
	<resolution width="320" height="480"/>
	<sleep duration="1000"/>
	<screen  name="mobile"/>
</collect>

AET Suite Migration to AET 2.1.0

Updating the XML suite

With version 2.1.0 we are supporting regular expressions for following filters:

Please notice that the change introduced for W3C HTML5 Issues Filter is backward incompatible:

For version 2.0.x we were expecting that message parameter contains a prefix of error message.

From 2.1.x we need to use messagePattern parameter with JAVA regular expression. To match with a prefix we need to provide i.e.: messagePattern="The first occurrence of.*". The .* is needed here to match all errors with given prefix.

Using new version of maven plugin

With the new version we have refactored our maven plugin. Please update the AET plugin version in your pom.xml. Previous versions of maven plugin are not compatible with new AET version!

Clone this wiki locally