-
Notifications
You must be signed in to change notification settings - Fork 3
Home
The Spotify Album Cover Display uses a SparkFun ESP32 and 64x64 RGB LED Matrix Panel.
This code is based off the ESP8266 Spotify Remote, written by Thing Pulse.
This code sets up your ESP32 as a webpage server and loads a 64x64 pixel image from the Spotify Client API. The ESP32 then decodes the jpg image into an 8-bit color array that gets displayed on the matrix panel.
This code is written for the SparkFun ESP32 Thing and the 64x64 RGB LED Matrix Panel. Below is a list of all the materials used in this project. If you enjoy this project, please support SparkFun!
- SparkFun ESP32 Thing
- ESP32 Thing Stackable Header Set
- RGB LED Matrix Panel - 64x64
- Jumper Wires Premium 6" M/M Pack of 10
- Jumper Wires Premium 12" M/F Pack of 10
- Wall Adapter Power Supply - 5.1V DC 2.5A (USB Micro-B)
- Alligator Clip with Pigtail (4 Pack)
If you wish to use other hardware, you may need to adapt the code to work with your setup.
This project does require a small amount of soldering for the headers. If you do not have access to soldering equipment, you can find a starter kit here:
To power the matrix panel, I used the alligator clips with pigtails to pull power directly from the USB Micro-B wall adapter off of the SparkFun ESP32. However, you can use the following materials instead to power the matrix panel directly with the power cable included with the panel: