V2.0.2 #13
Triggered via release
October 11, 2024 17:06
richonguzman
richonguzman
published
V2.0.2
Status
Success
Total duration
6m 20s
Artifacts
–
Annotations
93 warnings
|
build (heltec_ht-ct62_GPS, esp32c3)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (heltec_ht-ct62_GPS, esp32c3)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (heltec_ht-ct62_GPS, esp32c3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (heltec_wifi_lora_32_v3_TNC, esp32s3)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (heltec_wifi_lora_32_v3_TNC, esp32s3)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (heltec_wifi_lora_32_v3_TNC, esp32s3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ESP32_DIY_LoRa_GPS, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ESP32_DIY_LoRa_GPS, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ESP32_DIY_LoRa_GPS, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (heltec_wireless_tracker, esp32s3)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (heltec_wireless_tracker, esp32s3)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (heltec_wireless_tracker, esp32s3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ESP32_DIY_1W_LoRa_GPS, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ESP32_DIY_1W_LoRa_GPS, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ESP32_DIY_1W_LoRa_GPS, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (heltec_wifi_lora_32_v3_GPS, esp32s3)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (heltec_wifi_lora_32_v3_GPS, esp32s3)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (heltec_wifi_lora_32_v3_GPS, esp32s3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ESP32_DIY_LoRa_GPS_915, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ESP32_DIY_LoRa_GPS_915, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ESP32_DIY_LoRa_GPS_915, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ttgo_t_deck_GPS, esp32s3)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ttgo_t_deck_GPS, esp32s3)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ttgo_t_deck_GPS, esp32s3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (heltec-lora32-v2_GPS, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (heltec-lora32-v2_GPS, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (heltec-lora32-v2_GPS, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (OE5HWN_MeshCom, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (OE5HWN_MeshCom, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (OE5HWN_MeshCom, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ESP32S3_DIY_LoRa_GPS, esp32s3)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ESP32S3_DIY_LoRa_GPS, esp32s3)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ESP32S3_DIY_LoRa_GPS, esp32s3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ttgo_t_deck_plus, esp32s3)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ttgo_t_deck_plus, esp32s3)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ttgo_t_deck_plus, esp32s3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ttgo-t-beam-v0_7, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ttgo-t-beam-v0_7, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ttgo-t-beam-v0_7, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (esp32_c3_DIY_LoRa_GPS_915, esp32c3)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (esp32_c3_DIY_LoRa_GPS_915, esp32c3)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (esp32_c3_DIY_LoRa_GPS_915, esp32c3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (esp32_c3_DIY_LoRa_GPS, esp32c3)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (esp32_c3_DIY_LoRa_GPS, esp32c3)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (esp32_c3_DIY_LoRa_GPS, esp32c3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ESP32_DIY_1W_LoRa_GPS_LLCC68, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ESP32_DIY_1W_LoRa_GPS_LLCC68, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ESP32_DIY_1W_LoRa_GPS_LLCC68, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ttgo_t_beam_s3_SUPREME_v3, esp32s3)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ttgo_t_beam_s3_SUPREME_v3, esp32s3)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ttgo_t_beam_s3_SUPREME_v3, esp32s3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (heltec-lora32-v2_GPS_915, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (heltec-lora32-v2_GPS_915, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (heltec-lora32-v2_GPS_915, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ESP32_DIY_1W_LoRa_GPS_915, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ESP32_DIY_1W_LoRa_GPS_915, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ESP32_DIY_1W_LoRa_GPS_915, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ESP32S3_DIY_LoRa_GPS_915, esp32s3)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ESP32S3_DIY_LoRa_GPS_915, esp32s3)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ESP32S3_DIY_LoRa_GPS_915, esp32s3)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ttgo-t-beam-v1_2_915, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ttgo-t-beam-v1_2_915, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ttgo-t-beam-v1_2_915, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ttgo-t-beam-v1_2_SX1262, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ttgo-t-beam-v1_2_SX1262, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ttgo-t-beam-v1_2_SX1262, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ttgo-t-lora32-v2_1_TNC_915, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ttgo-t-lora32-v2_1_TNC_915, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ttgo-t-lora32-v2_1_TNC_915, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (Wemos_ESP32_Bat_LoRa_GPS, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (Wemos_ESP32_Bat_LoRa_GPS, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (Wemos_ESP32_Bat_LoRa_GPS, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ttgo-t-beam-v1_SX1268, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ttgo-t-beam-v1_SX1268, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ttgo-t-beam-v1_SX1268, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ttgo-t-lora32-v2_1_GPS, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ttgo-t-lora32-v2_1_GPS, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ttgo-t-lora32-v2_1_GPS, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ttgo-t-beam-v1_2, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ttgo-t-beam-v1_2, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ttgo-t-beam-v1_2, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ttgo-t-lora32-v2_1_TNC, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ttgo-t-lora32-v2_1_TNC, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ttgo-t-lora32-v2_1_TNC, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ttgo-t-lora32-v2_1_GPS_915, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ttgo-t-lora32-v2_1_GPS_915, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ttgo-t-lora32-v2_1_GPS_915, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ttgo-t-beam-v1_915, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ttgo-t-beam-v1_915, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ttgo-t-beam-v1_915, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
build (ttgo-t-beam-v1, esp32)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
build (ttgo-t-beam-v1, esp32)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v3, actions/setup-python@v4, actions/upload-release-asset@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (ttgo-t-beam-v1, esp32)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|