X3DS

Use your 3DS console as a XBOX 360 controller for your PC!

Inspried by 3DSController, X3DS is a 3DS homebrew application together with a Windows program which makes your 3DS also a wireless XBOX360 controller for your PC.

Setup

PC

1. Install ViGEm Driver.
2. Find out your PC's local IP address and remember it.
3. Make sure that your PC and your 3DS is in the same network.
4. Download the 3dsx.exe and 3dsx.exe.config. You can then modify the config file.
5. Run the 3dsx.exe.

3DS

1. Put x3ds.ini to the root of your 3DS's SD card. An example configuration can be found in the 3ds/ directory of this repo. You need to modify the x3ds.ini, and change the remote to your PC's address.
2. Put the x3ds.3dsx file to the /3ds folder, and execute the homebrew from hbmenu.
3. At this moment, you should be able to see message printed out to the 3dsx.exe's console every second. You can now checkout the newly connected virtual controller in the Control Pannel.

Key Map

Circle pad is mapped to left stick. On New3DS, C-Stick is mapped to right stick, and zL, zR are mapped to trigger keys.

Touch screen is used to map the left stick key and right stick key. If left 1/3 is pressed, left stick is pressed. If right 1/3 is pressed, right stick is pressed. If middle 1/3 is pressed, both left stick and right stick are pressed.