meta-swid-5

PHYTEC BSP-Yocto-NXP-I.MX93-PD24.1.1 adapation project for GORGY/BODET

Introduction

This is a short description of the steps to take to build the BSP

Build

Follow the steps bellow to build the BSP.

1. Create an empty folder to build the BSP in. host$ mkdir ~/yocto host$ cd ~/yocto

2. Get our phyLinux script to check out the BSP-Yocto-NXP-i.MX93-PD24.1.1 BSP. host$ wget https://download.phytec.de/Software/Linux/Yocto/Tools/phyLinux host$ chmod +x phyLinux host$ ./phyLinux init -p imx93 -r BSP-Yocto-NXP-i.MX93-PD24.1.1

3. Clone the meta-swid-5 layer into your sources directory. host$ git clone [email protected]:phytec/meta-swid-5.git sources/meta-swid-5

4. Source the environment. host$ source sources/poky/oe-init-build-env

5. Enable the newly added layer in your bblayers.conf by adding following line to conf/bblayers.conf: BBLAYERS += " ${OEROOT}/../meta-swid-5"

6. Build one of the available machines and images. host$ bitbake phytec-qt5demo-image

After that the build image can be found under deploy/images// .