Skip to content
/ dhyara Public

Dhyara is a ESP-IDF component for Mobile Ad-Hoc Networks on the top of ESP NOW.

License

Notifications You must be signed in to change notification settings

neel/dhyara

Repository files navigation

DHYARA

GitHub Repository | Doxygen Documentation

Dhyara is a ESP-IDF component for Mobile Ad-Hoc Networks on the top of ESP NOW (Layer 2). Dhyara is Open Source under BSD 2 Clause License. See LICENSE

[TOC]

Management Console

Basic Usage

The dhyara nodes identify each other via MAC address. Once deployed the nodes communicate with each other and each node builds a routing table based on its local view. On the top of that, dhyara provides C and C++ APIs for send/receice/ping/traceroute functionalities.

In the following example, the string "Hello World" is a variable length data which is sent to the destination identified with the mac address 4c:11:ae:9c:a6:85 over the multihop network. If the destination is a direct neighbour of the source then the message will be delivered in one hop. Otherwise the message sent will find its path to the destination 4c:11:ae:9c:a6:85 on its own by following the routing decisions of each intermediate nodes.

uint8_t sink[] = {0x4c, 0x11, 0xae, 0x9c, 0xa6, 0x85};
dhyara_send(sink, "Hello World");

C++ version of the above mentined C example.

dhyara::peer_address sink("4c:11:ae:9c:a6:85");
std::string data = "Hello World";
dhyara_send(sink, data.begin(), data.end());

To receive the mesage sent over the network the sink node needs to register a callback where the data is received.

void data_received(const unsigned char* source, const void* data, unsigned long len){
    // data received here
}
dhyara_receivef(&data_received);

ESP Now limits maximum size of a frame to 250 bytes. The variable length data is represented as a data packet (\ref dhyara::packets::data), which is broken into multiple smaller sized chunks. On the receiving end these chunks are joined to comstruct a data packet, which is used while calling the receive callback set using \ref dhyara_receivef, \ref dhyara_receive, and \ref dhyara_receive_data.

dhyara_receive_data([](const dhyara::peer::address& source, const dhyara::packets::data& data){
    std::cout << "received data " << " originating from " << data.source() << " via " << source << " of size " << data.length() << std::endl;
});

In the above mentioned C++ example, source represents the immediate neighbour of the desination, and data.source() is the originator of the message.

[Read More](\ref dhyara)

Compilation & Integration

Dhyara is a C++11 library that has to be used as an ESP-IDF component. It can be cloned to the components directory or can be used as a git submodule inside your projects components directory. If the application project is using an extra components directory then path to that directory has to be added in the root directory's CMakeLists.txt file as shown in the following example.

set(EXTRA_COMPONENT_DIRS ${CMAKE_CURRENT_SOURCE_DIR}/components)

To configure the network parameters use idf.py menuconfig in the aplications directory and Go to Component config > Dhyara ad hoc network To build and flash the application use idf.py build and idf.py flash as usual.

menuconfig

See Building the examples.

C Example

The examples are provided in the examples directory. See Building the examples for instructions on building the examples.

Following is a C example demonstrating basic usage of dhyara


void data_received(const unsigned char* source, const void* data, unsigned long len){
    ESP_LOGI("hello-c", "data received \"%s\" (length %lu)", (const char*)data, len);
}

void app_main(){
    esp_err_t ret = nvs_flash_init();
    if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND) {
        ESP_ERROR_CHECK(nvs_flash_erase());
        ret = nvs_flash_init();
    }
    ESP_ERROR_CHECK(ret);
    
    ESP_ERROR_CHECK(dhyara_init(WIFI_MODE_AP));
    dhyara_start_default_network();
    
    dhyara_receivef(&data_received);

    uint8_t self[] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
    dhyara_local(self);
    
    ESP_LOGI("hello-c", "Local MAC address %x:%x:%x:%x:%x:%x", self[0], self[1], self[2], self[3], self[4], self[5]);
    
    uint8_t source[] = {0x4c, 0x11, 0xae, 0x71, 0x0f, 0x4d};  // TODO change the source address
    uint8_t sink[]   = {0x4c, 0x11, 0xae, 0x9c, 0xa6, 0x85};  // TODO change the sink address
    
    const uint8_t* other = 0x0;
    
    if(memcmp(self, source, 6) == 0) other = sink;
    if(memcmp(self, sink,   6) == 0) other = source;
    
    while(1){
        if(other){
            dhyara_ping(other, .count = 1, .batch = 10);
            dhyara_traceroute(other);
            dhyara_send(other, "Hello World");
            dhyara_send(other, "Hello World", 5);
        }
        vTaskDelay(pdMS_TO_TICKS(2000));
    }
}

C++ Example

Dhyara is primarily intended to be used for C++ application. To build a C++ application with ESP-IDF we first start from a main.c which calls a C++ function mainx(). Following is the main.c from the example hello-cxx


void app_main(){
    esp_err_t ret = nvs_flash_init();
    if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND) {
        ESP_ERROR_CHECK(nvs_flash_erase());
        ret = nvs_flash_init();
    }
    ESP_ERROR_CHECK(ret);
    
    ESP_ERROR_CHECK(dhyara_init(WIFI_MODE_AP));
    
    mainx(); // Enter C++
}

The mainx() is declared and gaurded by extern C{} block in the mainx.h, so that it can be included from c as well as C++. Following is the definition of mainx() which can be found in the mainx.cpp in the hello-cxx example project.

void mainx(){
    dhyara::network network(dhyara_link());
    dhyara_set_default_network(&network);
    
    dhyara::peer_address sink("4c:11:ae:9c:a6:85"), source("4c:11:ae:71:0f:4d");

    dhyara_start_default_network();
    
    dhyara::peer_address local = dhyara_local();
    dhyara::peer_address other = (local == source) ? sink : ((local == sink) ? source : dhyara::peer_address::null());
    
    // The anonymous function will be called once all chunks of a data packet is received
    dhyara_receive_data([](const dhyara::peer::address& source, const dhyara::packets::data& data){
        std::cout << "received data " << " originating from " << data.source() << " via " << source << " of size " << data.length() << std::endl;
    });
    
    while(1){
        if(!other.is_null()){
            dhyara_ping(other, 1, 10);
            dhyara_traceroute(other);
            std::string buffer = "Hello World";
            dhyara_send(other, buffer.begin(), buffer.end());
        }
        vTaskDelay(pdMS_TO_TICKS(5000));
    }
} 

About

Dhyara is a ESP-IDF component for Mobile Ad-Hoc Networks on the top of ESP NOW.

Resources

License

Stars

Watchers

Forks

Packages

No packages published