Skip to content
Alexander Bürger edited this page Apr 21, 2023 · 2 revisions

Frequently Asked Questions

Does fimex use file-locks for reading/writing?

It is very common, that NWP (numerical weather prediction) files are updated while the model is running. It is often desirable to be able to read the file already when the model is still running, e.g. to see the first few ours of weather prediction.

Fimex does not use file-locks for reading: Graphical interfaces like diana which read via Fimex might keep the file open as long as it does not change, therefor locking the file for too long to allow writers to update the files. Writing additional data to an existing file is usually not a problem, in particularly when the reader re-opens the file when it has updated the time-stamp mtime.

Fimex does not implement file-locking for writers generally, though in particularly with the fillWriter interface this situation might change, in particular for netcdf-files

How can I change the units of a variable?

If the original variable e.g. t2m has units-attribute Celsius and you want to have a new netcdf-file with unit Kelvin, you should use the --output.config=cdmWriterConfig.xml and define there the new units for the that variable and make sure you defined the datatype of that variable, too.

If the input-file has the wrong units, e.g. Celsius while the data in fact is Kelvin, you should use the input.config=... and re-define the units-attribute. The data-values won't be changed.

How to solve problems with a short variable?

I have problems with a felt-file with a variable of type 'short'. fimex abborts with change in scaling-factor for parameter: 31,2,1000 consider using float or double datatpye. What should I do?

  • While the netcdf-format allows for only 1 scaling-factor per variable, the felt-format can have a scaling-factor per 2d-slice per variable (that are level*time scaling-factors). You should change the type of the variable and its _FillValue attribute from short to float in the file felt2nc_variables.xml.

  • If you want to save disk-space, and you know that all data of the variable can be subscribed sufficiently with a packed short data-array, use the ncml-configuration as follows:

    <?xml version="1.0" encoding="UTF-8"?>
    <netcdf xmlns="http://www.unidata.ucar.edu/namespaces/netcdf/ncml-2.2"
               xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
               xsi:schemaLocation="http://www.unidata.ucar.edu/namespaces/netcdf/ncml-2.2 ncml-2.2.xsd ">
    <!-- change the type of a variable, repack -->
    <variable name="precipitation_amount" type="short">
       <attribute name="_FillValue" value="-32767" type="short" />
       <attribute name="scale_factor" value="0.1" type="float" />
       <attribute name="add_offset" value="0" type="double" />
    </variable>
    </netcdf>
    

In this example, the precipitation will be described with an accuracy of 0.1mm and up to 3276.7mm. The ncml-configfile will be applied right before writing with the --ncml.config=....ncml fimex-option.

Vector-rotation

Which vectors are auto-detected for rotation

Vectors are autorotated if one of the following applies:

  • the <spatial_vector direction="x" counterpart="y_wind" /> property is set for both vectors, this can be done with ncml, or the different reader-configurations
  • the vector has a known CF-standard-name, e.g.
    • x_wind, y_wind
    • _x_velocity,_y_velocity
    • _x_transport,_y_transport
    • _x_displacement,_y_displacement
    • eastward, northward
  • the complete list can be found in the source code of enhanceVectorProperties here

Vector-rotation gives error-message (>= 0.48) and wrong values due to different units

When rotating vectors for spatial interpolations, fimex does not change the scale_factor, add_offset or unit of the vector-components, but requires, that those are equal for both x and y component of the vector. This happens in particular when retrieving wind-data from ECMWF in netcdf, e.g. for ERA data.

A solution is to configure the vector to have the same scale/add_offset, e.g. with ncml (--input.config):

<variable orgName="Uvind" name="x_wind" type="float">
  <attribute name="scale_factor" value="1" type="float" />
  <attribute name="add_offset" value="0" type="float" />
  <remove name="_FillValue"  type="attribute" />
  <attribute name="standard_name" value="x_wind" type="String" />
</variable>
<variable orgName="Vvind" name="y_wind" type="float" >
  <attribute name="scale_factor" value="1" type="float" />
  <attribute name="add_offset" value="0" type="float" />
  <remove name="_FillValue"  type="attribute" />
  <attribute name="standard_name" value="y_wind" type="String" />
</variable>

What does this error-message mean?

CDMException: Felt_File_Error: FeltError: cannot read gridParameters: no Felt_Array2 available

The config-file for felt-files must at least define 1 existing parameter in the corresponding felt-file. Update your config-file (e.g. felt2nc_variables.xml) with the output from the felt-index, which can be read by felt-tools like rfinh.

CDMException: Can't open HDF5 attribute

This error-message is unfortuneatly very misleading. In many cases, the _FillValue type does not correspond to the variables type. Please check your config-file. Unless really required, it's recommended to remove the _FillValue.

How can I read grib-message which are split over several files?

Since fimex 0.40.1, it is possible to give multiple optional file-sources:

fimex --input.file=/opdata/lameps/mle/eceps_201211260000_ens00.mars \
      --input.type=grb --input.config=/home/heikok/Programme/MetSis/Fimex/share/etc/cdmGribReaderConfig.xml \
      --input.optional=/opdata/lameps/mle/eceps_201211260000_ens01.mars \
      --input.optional=/opdata/lameps/mle/eceps_201211260000_ens02.mars \
      --output.file=eceps.nc4

Running an extraction from opendap

Example:

fimex --input.file=http://thredds.met.no/thredds/dodsC/topaz/dataset-topaz3-arc-myocean-be \
      --input.type=netcdf \
      --output.type=netcdf \
      --output.file=test.nc \
      \
      --extract.selectVariables=time \
      --extract.selectVariables=x \
      --extract.selectVariables=y \
      --extract.selectVariables=depth \
      --extract.selectVariables=longitude \
      --extract.selectVariables=latitude \
      --extract.selectVariables=temperature \
      \
      --extract.reduceTime.start=2010-10-05 \
      --extract.reduceTime.end=2010-10-07 \
      \
      --extract.reduceToBoundingBox.south 55.0 \
      --extract.reduceToBoundingBox.north 80.0 \
      --extract.reduceToBoundingBox.east 20.0 \
      --extract.reduceToBoundingBox.west -5.0

OpENDAP and slicing

OpENDAP servers are often limited on how much data can be read at per request, e.g. thredds allows only 500MB binary data / 50MB ascii data per request before failing with an error like

syntax error, unexpected WORD_STRING, expecting WORD_WORD
context: Error { code = 403; message = "Request too big=19011.0 Mbytes, max=500.0"^;};
terminate called after throwing an instance of 'MetNoFimex::CDMException'
  what():  CDMException: NetCDF: Malformed or inaccessible DAP DATADDS
Aborted

Fimex tries to subdivide requests into one unlimited slice per variable. Unfortunately, OpENDAP often does not know about 'unlimited' dimension and one has to add that manually to fimex, e.g. for an unlimited time dimension: --input.config=unlimitedTime.ncml with contents like:

<?xml version="1.0" encoding="UTF-8"?>
<netcdf xmlns="http://www.unidata.ucar.edu/namespaces/netcdf/ncml-2.2"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
		xsi:schemaLocation="http://www.unidata.ucar.edu/namespaces/netcdf/ncml-2.2 http://www.unidata.ucar.edu/schemas/netcdf/ncml-2.2.xsd">
<dimension name="time" isUnlimited="true" />
</netcdf>

Authentication

In theory, it should be possible to specify username and password

  • in $HOME/.dodsrc and $HOME/.netrc (see below for an example)
  • as part of the URL for example https://XXXX:[email protected]/thredds/dodsC/....nc

Example $HOME/.netrc: machine thredds.met.no login XXXX password YYYY

Example $HOME/.dodsrc (replace YOURHOME with the value og $HOME):

HTTP.NETRC=YOURHOME/.netrc

Unfortunately, this does not always seem to work as expected. Known status of OpenDAP authentication support (applies to fimex and ncdump):

  • Specifying the password in the URL does not seem to work when the password contains a /, at least for Ubuntu 18.04.
  • For Ubuntu 16.04 (xenial, EOL), both URL and netrc seem to work.
  • For Ubuntu 18.04 (bionic), username and password cannot be read from netrc, but can be specified in the URL.
  • For Ubuntu 20.04 (focal), username and password can only be read from netrc, but cannot be specified in the URL.