Skip to content

melo/docker-perl-alt

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Perl Docker Image System

Docker Pulls Docker Build Status

This set of images provides a full and extensible setup to run your Perl applications with Docker.

There are three main versions of the image:

  • a -runtime version that should be used to run the final applications - the final target of your Dockerfile should use this one;
  • a -build version that can be used to build your applications;
  • a -devel version that can be used to debug and develop applications: this is mostly the -build version with extra modules.

Each of these is available in combination with an Alpine, the official Perl base image, and the wolfi-base from the Chainguard project.

Base Image Development Build Runtime
alpine:3.20 alpine-latest-devel / alpine-3.20-devel alpine-latest-build / alpine-3.20-build alpine-latest-runtime / alpine-3.20-runtime
alpine:edge alpine-next-devel / alpine-edge-devel alpine-next-build / alpine-edge-build alpine-next-runtime / alpine-edge-runtime
perl:5.40-slim perl-latest-devel / perl-5.40-slim-devel perl-latest-build / perl-5.40-slim-build perl-latest-runtime / perl-5.40-slim-runtime
perl:5.40 perl-full-devel / perl-5.40-devel perl-full-build / perl-5.40-build perl-full-runtime / perl-5.40-runtime
cgr.dev/chainguard/wolfi-base chainguard-latest-devel chainguard-latest-build chainguard-latest-runtime

See below how to create a Dockerfile for your project that makes full use of this setup, while making sure that you'll end up with the smallest possible final image.

What's inside?

All images are based on Alpine and Perl images and include:

  • perl:
    • on Alpine images, we use the system perl:
      • 3.20: perl 5.38.2;
      • edge: perl 5.40.0.
    • on official Perl images, currently 5.40.0;
    • on Chainguard images, currently 5.40.0.
  • cpanm;
  • Carton;
  • App::cpm.

Some common libs and tools are also included:

  • openssl: this is not the default for Alpine, but a lot of software fails to build without it;
  • zlib;
  • expat;
  • libxml2 and libxml-utils;
  • jq.

The -build and -devel versions include the development versions of these libraries.

Lambda Support (Experimental)

The Lambda support is still experimental. It seems to work fine but we are not using it in production at this moment.

The support includes testing your functions locally using the AWS Lambda Runtime Interface Emulator.

Most of the Lambda logic is provided by the excellent AWS::Lambda Perl module. Kudos to Shogo Ichinose for this.

Your handlers should be placed in the lambda-handlers/ of your project. Make sure your .pl handlers are executable.

A sample handler (named functions.pl) looks like this:

#!perl

use strict;
use warnings;
use JSON::MaybeXS;

sub echo {
  my ($payload, $context) = @_;

  return encode_json({ payload => $payload, context => { %$context } });
}

1;

The name of this function is functions.echo. The first part, functions, is the name of the handler file, functions.pl. The second part, echo, is the name of the sub called in that file. See AWS::Lambda for details on writing Lambda handlers.

To test the function locally, build your image then run it like this:

$ docker run --rm -it -p 9000:8080 your_image your_handler.your_function
10 Dec 2022 16:31:26,839 [INFO] (rapid) exec '/var/runtime/bootstrap' (cwd=/app, handler=your_handler.your_function)
10 Dec 2022 16:31:36,015 [INFO] (rapid) extensionsDisabledByLayer(/opt/disable-extensions-jwigqn8j) -> stat /opt/disable-extensions-jwigqn8j: no such file or directory
10 Dec 2022 16:31:36,015 [WARNING] (rapid) Cannot list external agents error=open /opt/extensions: no such file or directory

You can then test with:

$ curl -XPOST 'http://localhost:9000/2015-03-31/functions/function/invocations' -d '{}'

The logs will show something like this:

START RequestId: 3503ccbd-0dfc-4eba-99f7-5aa72b58692b Version: $LATEST
END RequestId: 3503ccbd-0dfc-4eba-99f7-5aa72b58692b
REPORT RequestId: 3503ccbd-0dfc-4eba-99f7-5aa72b58692b	Init Duration: 0.36 ms	Duration: 63.70 ms	Billed Duration: 64 ms	Memory Size: 3008 MB	Max Memory Used: 3008 MB

For a fully working example see test/lambda inside this repository.

Entrypoint

The system includes a standard ENTRYPOINT script that sets a decent PERL5LIB based on the assumption that your app libs are under /app/lib.

It will also check for submodules under /app/elib/ and include all /app/elib/*/lib folders in PERL5LIB.

Finally, if you need your own ENTRYPOINT script, place an executable at /entrypoint and it will be executed before the COMMAND.

Rational

The system was designed to have a big, fully featured, build-time image, and another slim runtime image. A third version that you can use during development time can also be created with a small addition to your app Dockerfile.

With a Docker multi-stage build, you can use a single Dockerfile to build and generate all the images, including the final runtime image.

The system assumes a specific directory layout for the app, the app dependencies, and the "stack".

  • application is inside /app;
  • application dependencies will be installed at /deps;
  • stack code and dependencies will be installed at /stack;

The fact that the stack code and dependencies are placed outside the app locations allow you to create Docker images with just the stack components that you can reuse between multiple projects. See below for two sample stacks, one for a Dancer2+Xslate+Starman combo, and another to have all the things needed to run a Minion job system.

The reason to split your app dependencies and your code is to allow you to use an image with your work directory from your laptop mounted under /app. If the app dependencies are in /deps and only your code is under /apps you can start a container with an image created from your app Dockerfile, and mount the laptop work directory with docker run -v-option under /app and develop with the same environment as your deployment environment will look like.

How to use

Below you'll find the recommended Dockerfile. The goal is to get a fast build, making use as much as possible of the Docker build cache, and provide the smallest possible image in the end.

This is an ordinary application. Dependencies are tracked with Carton in a cpanfile with the associate cpanfile.snapshot.

You should be able to just copy&paste this sample Dockerfile to your app work directory, and tweak the apk add lines to make sure that you add any packaged dependencies you might need. If you don't need any package dependencies, you can just remove those lines altogether.

### First stage, just to add our package dependencies. We put this on a
### separate stage to be able to reuse them across the "build" and
### "devel" phases lower down
FROM melopt/perl-alt:alpine-latest-build AS package_deps

### Add any packaged dependencies that your application might need. Make
### sure you use the -devel or -libs package, as this is to be used to
### build your dependencies and app. The postgres-libs shown below is
### just an example
RUN apk --no-cache add postgres-libs


### Second stage, build our app. We start from the previous stage, package_deps
FROM package_deps AS builder

### We copy all cpanfiles (this includes the optional cpanfile.snapshot)
### to the application directory, and we install the dependencies. Note
### that by default pdi-build-deps will install our apps dependencies
### under /deps. This is important later on.
COPY cpanfile* /app/
RUN cd /app && pdi-build-deps

### Copy the rest of the application to the app folder
COPY . /app/


### The third stage is used to create a developers image, based on the
### package_deps and build phases, and with
### possible some extra tools that you might want during local
### development. This layer has no impact on the runtime final version,
### but can be generated with a `docker build --target devel`
FROM package_deps AS devel

### Add any packaged dependencies that your application might need
### during development time. Given that we start from package_deps
### phase, all package dependencies from the build phase are already
### included.
RUN apk --no-cache add jq

### Assuming you have a cpanfile.devel file with all your devel-time
### dependencies, you can install it with this
RUN cd /app && pdi-build-deps cpanfile.devel

### Copy the App dependencies and the app code
COPY --from=builder /deps/ /deps/
COPY --from=builder /app/ /app/

### And we are done: this "development" image can be generated with:
###
###      docker build -t my-app-devel --target devel .
###
### You can then run it as:
###
###      cd your-app-workdir; docker run -it --rm -v `pwd`:/app my-app-devel
###


### Now for the fourth and final stage, the runtime edition. We start from the
### runtime version and add all the files from the build phase
FROM melopt/perl-alt:alpine-latest-runtime

### Add any packaged dependencies that your application might need
RUN apk --no-cache add postgres-libs

### Copy the App dependencies and the app code
COPY --from=builder /deps/ /deps/
COPY --from=builder /app/ /app/

### Add the command to start the application
CMD [ "your_app_start_command.pl" ]

Reuseable Stacks

You can also make stacks with commonly used combinations of packages. The setup is almost the same, the only difference is that when installing the dependencies and any other software you might need, the destination directory is /stack. The -runtime image will automatically include all of /stack dependencies and libs into PERL5LIB, and it will also make sure that any commands that are placed on bin/ directories are included on our PATH.

Dancer2 + Text::Xslate + Starman

Below you'll find an example of a Dockerfile for a stack that provides you:

  • Dancer2;
  • Text::Xslate for templating;
  • Starman for a web server.

This is actually available at melopt/dancer2-xslate-starman (repository is at Github melo/docker-dancer2-xslate-starman). You can check the cpanfile used for the stack.

FROM melopt/perl-alt:alpine-latest-build AS builder

COPY cpanfile* /stack/
RUN cd /stack && pdi-build-deps --stack


FROM melopt/perl-alt:alpine-latest-runtime

COPY --from=builder /stack /stack/

Some notes about this Dockerfile:

  • notice that the pdi-build-deps is run with the --stack option;
  • for the runtime version, we copy the /stack folders.

With this setup, you'll end up with a Docker image for your stack that you can reuse with multiple projects. For example, a simple Dancer2+Xslate-based web app could have a Dockerfile like this:

### Package deps, for build and devel phases
FROM melopt/perl-alt:latest-build AS package_deps

RUN apk --no-cache add mariadb-dev

### Build phase, build our app and our app deps
FROM package_deps AS builder

COPY cpanfile* /app/
RUN cd /app && pdi-build-deps

COPY . /app/


### Create the "development" image
FROM package_deps AS devel

RUN apk --no-cache add jq
RUN cd /app && pdi-build-deps cpanfile.devel

COPY --from=builder /deps/ /deps/
COPY --from=builder /app/ /app/


### Final phase: the runtime version - notice that we start from the stack image
FROM melopt/dancer2-xslate-starman

ENV PLACK_ENV=production
RUN apk --no-cache add mariadb-client

COPY --from=builder /deps/ /deps/
COPY --from=builder /app/ /app/

CMD [ "plackup", "--port", "80", "--server", "Starman" ]

Minion

Another stack, this time to allow users to run Minion workers and the admin interface. You can find the image at melopt/minion (repository at Github melo/docker-minion).

### Prepare the dependencies
FROM melopt/perl-alt:alpine-latest-build AS builder

RUN apk --no-cache add mariadb-dev postgresql-dev

COPY cpanfile* /stack/
RUN  cd /stack && pdi-build-deps --stack

### This stack includes some helper scripts
COPY bin /stack/bin/
### small "test phase", just to catch stupid mistakes...
RUN set -e && cd /stack && for script in bin/* ; do perl -wc $script ; done


### Runtime image
FROM melopt/perl-alt:alpine-latest-runtime

RUN apk --no-cache add mariadb-client postgresql-libs

COPY --from=builder /stack /stack

ENTRYPOINT [ "/stack/bin/minion-entrypoint" ]

Repository

This image source repository is at https://github.com/melo/docker-perl-alt.

Author

Pedro Melo [email protected]

About

A Docker image to manage Perl-based projects

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published