ns3_802.11_frame_aggregation

ns3 scripts for simulating scenarios in which 802.11 frame aggregation is studied

Citation

If you use this code, please cite the next research article:

Jose Saldana, Jose Ruiz-Mas, Jose Almodovar, "Frame Aggregation in Central Controlled 802.11 WLANs: the Latency vs. Throughput Trade-off," IEEE Communications Letters, vol.21, no. 2, pp. 2500-2530, Nov. 2017. ISSN 1089-7798. http://dx.doi.org/10.1109/LCOMM.2017.2741940

http://ieeexplore.ieee.org/document/8013762/

Author's self-archive version: http://diec.unizar.es/~jsaldana/personal/amsterdam_2017_in_proc.pdf

wifi-central-controlled-aggregation_v140.cc is the ns3 file used for the paper.

Content of the repository

The .cc file contains the ns3 script. It has been run with ns3-26 (https://www.nsnam.org/ns-3-26/).

The folder shell_scripts_used_in_the_paper contains the files used for obtaining each of the figures presented in the paper.

• Figure 1

test_fig1.1.sh		No aggregation
test_fig1.2.sh		AMPDU aggregation

• Figure 2

test_fig2.1.sh		No aggregation
test_fig2.2.sh		AMPDU aggregation

• Figure 3

test_fig3.1.sh		AMPDU 8000
test_fig3.2.sh		AMPDU 16000

• Figure 5

test_fig5.1_5-25.sh	No aggregation				5, 10, 15, 20 users
test_fig5.1_40-50.sh	No aggregation				40, 50 users
test_fig5.1_80.sh	No aggregation				80 users
test_fig5.2_5-25.sh	AMPDU aggregation			5, 10, 15, 20 users
test_fig5.2_40-50.sh	AMPDU aggregation			40, 50 users
test_fig5.2_80.sh	AMPDU aggregation			80 users
test_fig5.3_5-25.sh	AMPDU aggregation, 8kB			5, 10, 15, 20 users
test_fig5.3_40-50.sh	AMPDU aggregation, 8kB			40, 50 users
test_fig5.3_80.sh	AMPDU aggregation, 8kB			80 users
test_fig5.4_5-25.sh	AMPDU aggregation, Algorithm		5, 10, 15, 20 users
test_fig5.4_40-50.sh	AMPDU aggregation, Algorithm		40, 50 users
test_fig5.4_80.sh	AMPDU aggregation, Algorithm		80 users
test_fig5.5_5-25.sh	AMPDU aggregation, 8kB, Algorithm	5, 10, 15, 20 users
test_fig5.5_40-50.sh	AMPDU aggregation, 8kB, Algorithm	40, 50 users
test_fig5.5_80.sh	AMPDU aggregation, 8kB, Algorithm	80 users

How to use it

• Download ns3.

• Put the .cc file in the ns-3.26/scratch directory.

• Put a .sh file in the ns-3.26 directory.

• Run a .sh file. (You may need to adjust the name of the .cc file in the .sh script).