Skip to content

Updating MAINTAINERS.md info and removing dead code #788

Updating MAINTAINERS.md info and removing dead code

Updating MAINTAINERS.md info and removing dead code #788

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: CC-BY-4.0
# This is a basic workflow to help you get started with Actions
name: Test Asset Transfer
# Controls when the workflow will run
on:
# Triggers the workflow on push or pull request events but only for the main branch
push:
branches: [ main ]
pull_request:
branches: [ main ]
# Allows you to run this workflow manually from the Actions tab
workflow_dispatch:
concurrency:
group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
cancel-in-progress: true
# A workflow run is made up of one or more jobs that can run sequentially or in parallel
jobs:
fabric-asset-transfer:
# if: ${{ false }}
# The type of runner that the job will run on
runs-on: ubuntu-latest
# Steps represent a sequence of tasks that will be executed as part of the job
steps:
# Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
- uses: actions/[email protected]
# - name: Set up JDK 8
# uses: actions/setup-java@v2
# with:
# java-version: '8'
# distribution: 'adopt'
- name: Set up Go
uses: actions/setup-go@v2
with:
go-version: '1.20.2'
- name: Use Node.js 14.x
uses: actions/setup-node@v2
with:
node-version: 14.x
# CORDA NETWORK
# - name: Generate github.properties
# run: |
# echo "Using ${GITHUB_ACTOR} user."
# echo "username=${GITHUB_ACTOR}" >> github.properties
# echo "password=${{ secrets.GITHUB_TOKEN }}" >> github.properties
# echo "url=https://maven.pkg.github.com/${GITHUB_ACTOR}/weaver-dlt-interoperability" >> github.properties
#
# echo "Using ${GITHUB_ACTOR} user."
# echo "username=${GITHUB_ACTOR}" >> github.main.properties
# echo "password=${{ secrets.GITHUB_TOKEN }}" >> github.main.properties
# echo "url=https://maven.pkg.github.com/hyperledger-labs/weaver-dlt-interoperability" >> github.main.properties
#
# ./scripts/get-cordapps.sh || mv github.main.properties github.properties
#
# cat github.properties
# working-directory: tests/network-setups/corda
#
# - name: Start Corda Network
# run: |
# sed -i "/docker logs corda_partya_1 -f/"' s/^/#/' "scripts/start-nodes.sh"
# make start &> corda-net.out &
# working-directory: tests/network-setups/corda
# FABRIC NETWORK
- name: Start Fabric Network
run: make start-interop CHAINCODE_NAME=simpleassettransfer PROFILE='2-nodes'
working-directory: tests/network-setups/fabric/dev
# - name: Corda Network logs
# run: |
# cat tests/network-setups/corda/corda-net.out
# docker logs corda_partya_1
# RELAY
- name: Edit Relay docker compose
run: make convert-compose-method2
working-directory: core/relay
- name: Start Relay for network1
run: make start-server COMPOSE_ARG='--env-file docker/testnet-envs/.env.n1'
working-directory: core/relay
- name: Start Relay for network2
run: make start-server COMPOSE_ARG='--env-file docker/testnet-envs/.env.n2'
working-directory: core/relay
# - name: Start Relay for Corda_Network
# run: make start-server COMPOSE_ARG='--env-file docker/testnet-envs/.env.corda'
# working-directory: core/relay
#
# - name: Start Relay for Corda_Network2
# run: make start-server COMPOSE_ARG='--env-file docker/testnet-envs/.env.corda2'
# working-directory: core/relay
# FABRIC DRIVER
- name: Setup Fabric Driver .env
run: |
sed -i "s#<PATH-TO-WEAVER>#${GITHUB_WORKSPACE}#g" docker-testnet-envs/.env.n1
sed -i "s#<PATH-TO-WEAVER>#${GITHUB_WORKSPACE}#g" docker-testnet-envs/.env.n2
working-directory: core/drivers/fabric-driver
- name: Start Fabric Driver for network1
run: make deploy COMPOSE_ARG='--env-file docker-testnet-envs/.env.n1' NETWORK_NAME=$(grep NETWORK_NAME docker-testnet-envs/.env.n1 | cut -d '=' -f 2)
working-directory: core/drivers/fabric-driver
- name: Start Fabric Driver for network2
run: make deploy COMPOSE_ARG='--env-file docker-testnet-envs/.env.n2' NETWORK_NAME=$(grep NETWORK_NAME docker-testnet-envs/.env.n2 | cut -d '=' -f 2)
working-directory: core/drivers/fabric-driver
# IIN AGENT
- name: Setup Fabric IIN Env
run: |
sed -i "s#<PATH-TO-WEAVER>#${GITHUB_WORKSPACE}#g" docker-testnet/envs/.env.n1.org1
sed -i "s#^AUTO_SYNC=true#AUTO_SYNC=false#g" docker-testnet/envs/.env.n1.org1
sed -i "s#^DNS_CONFIG_PATH=.*#DNS_CONFIG_PATH=./docker-testnet/configs/dnsconfig-2-nodes.json#g" docker-testnet/envs/.env.n1.org1
sed -i "s#<PATH-TO-WEAVER>#${GITHUB_WORKSPACE}#g" docker-testnet/envs/.env.n1.org2
sed -i "s#^AUTO_SYNC=true#AUTO_SYNC=false#g" docker-testnet/envs/.env.n1.org2
sed -i "s#^DNS_CONFIG_PATH=.*#DNS_CONFIG_PATH=./docker-testnet/configs/dnsconfig-2-nodes.json#g" docker-testnet/envs/.env.n1.org2
sed -i "s#<PATH-TO-WEAVER>#${GITHUB_WORKSPACE}#g" docker-testnet/envs/.env.n2.org1
sed -i "s#^AUTO_SYNC=true#AUTO_SYNC=false#g" docker-testnet/envs/.env.n2.org1
sed -i "s#^DNS_CONFIG_PATH=.*#DNS_CONFIG_PATH=./docker-testnet/configs/dnsconfig-2-nodes.json#g" docker-testnet/envs/.env.n2.org1
sed -i "s#<PATH-TO-WEAVER>#${GITHUB_WORKSPACE}#g" docker-testnet/envs/.env.n2.org2
sed -i "s#^AUTO_SYNC=true#AUTO_SYNC=false#g" docker-testnet/envs/.env.n2.org2
sed -i "s#^DNS_CONFIG_PATH=.*#DNS_CONFIG_PATH=./docker-testnet/configs/dnsconfig-2-nodes.json#g" docker-testnet/envs/.env.n2.org2
working-directory: core/identity-management/iin-agent
- name: Start Fabric IIN Agent for network1
run: |
make deploy COMPOSE_ARG='--env-file docker-testnet/envs/.env.n1.org1' DLT_SPECIFIC_DIR=$(grep DLT_SPECIFIC_DIR docker-testnet/envs/.env.n1.org1 | cut -d '=' -f 2)
make deploy COMPOSE_ARG='--env-file docker-testnet/envs/.env.n1.org2' DLT_SPECIFIC_DIR=$(grep DLT_SPECIFIC_DIR docker-testnet/envs/.env.n1.org2 | cut -d '=' -f 2)
working-directory: core/identity-management/iin-agent
- name: Start Fabric IIN Agent for network2
run: |
make deploy COMPOSE_ARG='--env-file docker-testnet/envs/.env.n2.org1' DLT_SPECIFIC_DIR=$(grep DLT_SPECIFIC_DIR docker-testnet/envs/.env.n2.org1 | cut -d '=' -f 2)
make deploy COMPOSE_ARG='--env-file docker-testnet/envs/.env.n2.org2' DLT_SPECIFIC_DIR=$(grep DLT_SPECIFIC_DIR docker-testnet/envs/.env.n2.org2 | cut -d '=' -f 2)
working-directory: core/identity-management/iin-agent
# CORDA DRIVER
# - name: Start Corda Driver
# run: make deploy COMPOSE_ARG='--env-file docker-testnet-envs/.env.corda'
# working-directory: core/drivers/corda-driver
#
# - name: Start Corda_Network2 Driver
# run: make deploy COMPOSE_ARG='--env-file docker-testnet-envs/.env.corda2'
# working-directory: core/drivers/corda-driver
# FABRIC CLI
- name: Setup Fabric CLI .npmrc
run: |
cp .npmrc.template .npmrc
sed -i "s/<personal-access-token>/${{ secrets.GITHUB_TOKEN }}/g" .npmrc
cat .npmrc
working-directory: samples/fabric/fabric-cli
- name: Build Fabric CLI
run: |
npm install --global yarn
make build
working-directory: samples/fabric/fabric-cli
# FABRIC CLI
- name: Setup Fabric CLI ENV
run: |
echo ${GITHUB_WORKSPACE}
cp .env.template .env
./bin/fabric-cli env set-file ./.env
./bin/fabric-cli env set MEMBER_CREDENTIAL_FOLDER ${GITHUB_WORKSPACE}/samples/fabric/fabric-cli/src/data/credentials_docker
./bin/fabric-cli env set CONFIG_PATH ${GITHUB_WORKSPACE}/samples/fabric/fabric-cli/config.json
./bin/fabric-cli env set DEFAULT_APPLICATION_CHAINCODE simpleassettransfer
./bin/fabric-cli env set REMOTE_CONFIG_PATH ${GITHUB_WORKSPACE}/samples/fabric/fabric-cli/remote-network-config.json
./bin/fabric-cli env set CHAINCODE_PATH ${GITHUB_WORKSPACE}/samples/fabric/fabric-cli/chaincode.json
cat .env
working-directory: samples/fabric/fabric-cli
- name: Setup Fabric CLI Config
run: |
echo ${GITHUB_WORKSPACE}
cp config.template.json config.json
sed -i "s#<PATH-TO-WEAVER>#${GITHUB_WORKSPACE}#g" config.json
./bin/fabric-cli config set network2 aclPolicyPrincipalType ca
./bin/fabric-cli config set network1 chaincode simpleassettransfer
./bin/fabric-cli config set network2 chaincode simpleassettransfer
cp chaincode.json.template chaincode.json
cp remote-network-config.json.template remote-network-config.json
sed -i "s#localhost:9080#relay-network1:9080#g" remote-network-config.json
sed -i "s#localhost:9081#relay-corda:9081#g" remote-network-config.json
sed -i "s#localhost:9082#relay-corda2:9082#g" remote-network-config.json
sed -i "s#localhost:9083#relay-network2:9083#g" remote-network-config.json
sed -i "s#localhost:10006#corda_partya_1:10003#g" remote-network-config.json
sed -i "s#localhost:30006#corda_network2_partya_1:10003#g" remote-network-config.json
working-directory: samples/fabric/fabric-cli
- name: Fabric CLI Init
run: |
./bin/fabric-cli configure create all --local-network=network1
./bin/fabric-cli configure create all --local-network=network2
./bin/fabric-cli configure network --local-network=network1 --num-orgs=2
./bin/fabric-cli configure network --local-network=network2 --num-orgs=2
./scripts/initAssetsForTransfer.sh
working-directory: samples/fabric/fabric-cli
- name: Fabric Sync Membership using IIN Agent
run: |
./bin/fabric-cli configure membership --local-network=network1 --target-network=network2 --iin-agent-endpoint=localhost:9500
sleep 30
docker logs iin-agent-Org1MSP-network1
docker logs iin-agent-Org1MSP-network2
./bin/fabric-cli configure membership --local-network=network2 --target-network=network1 --iin-agent-endpoint=localhost:9501
sleep 30
docker logs iin-agent-Org1MSP-network1
docker logs iin-agent-Org1MSP-network2
working-directory: samples/fabric/fabric-cli
# CORDA CLIENT
# - name: Corda CLI Setup
# run: |
# cp remote-network-config.json.template remote-network-config.json
# sed -i "s#localhost:9080#relay-network1:9080#g" remote-network-config.json
# sed -i "s#localhost:9081#relay-corda:9081#g" remote-network-config.json
# sed -i "s#localhost:9082#relay-corda2:9082#g" remote-network-config.json
# sed -i "s#localhost:9083#relay-network2:9083#g" remote-network-config.json
# sed -i "s#localhost:10006#corda_partya_1:10003#g" remote-network-config.json
# sed -i "s#localhost:30006#corda_network2_partya_1:10003#g" remote-network-config.json
# working-directory: samples/corda/corda-simple-application/clients/src/main/resources/config
#
# - name: Corda CLI Initialize Vault
# run: make initialise-vault-asset-transfer-docker
# working-directory: samples/corda/corda-simple-application
# - name: Data Transfer Corda Client Tests
# run: |
# COUNT=0
# TOTAL=8
#
# # CORDA-CORDA2
# ./clients/build/install/clients/bin/clients request-state localhost:9081 relay-corda2:9082/Corda_Network2/corda_network2_partya_1:10003#com.cordaSimpleApplication.flow.GetStateByKey:H 1> tmp.out
# cat tmp.out | grep "SimpleState(key=H, value=\[SimpleState(key=H, value=1" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# ./clients/build/install/clients/bin/clients get-state H 1> tmp.out
# cat tmp.out | grep "SimpleState(key=H, value=\[SimpleState(key=H, value=1" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# # CORDA2-CORDA
#
# NETWORK_NAME=Corda_Network2 CORDA_PORT=30006 ./clients/build/install/clients/bin/clients request-state localhost:9082 relay-corda:9081/Corda_Network/corda_partya_1:10003#com.cordaSimpleApplication.flow.GetStateByKey:C 1> tmp.out
# cat tmp.out | grep "SimpleState(key=C, value=\[SimpleState(key=C, value=20" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# NETWORK_NAME=Corda_Network2 CORDA_PORT=30006 ./clients/build/install/clients/bin/clients get-state C 1> tmp.out
# cat tmp.out | grep "SimpleState(key=C, value=\[SimpleState(key=C, value=20" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# # CORDA - FABRIC1
# ./clients/build/install/clients/bin/clients request-state localhost:9081 relay-network1:9080/network1/mychannel:simplestate:Read:a 1> tmp.out
# tail -n 1 tmp.out | grep "SimpleState(key=a, value=Arcturus" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# ./clients/build/install/clients/bin/clients get-state a 1> tmp.out
# tail -n 1 tmp.out | grep "SimpleState(key=a, value=Arcturus" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# # CORDA - FABRIC2
# ./clients/build/install/clients/bin/clients request-state localhost:9081 relay-network2:9083/network2/mychannel:simplestate:Read:Arcturus 1> tmp.out
# tail -n 1 tmp.out | grep "SimpleState(key=Arcturus, value=17.671" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# ./clients/build/install/clients/bin/clients get-state Arcturus 1> tmp.out
# tail -n 1 tmp.out | grep "SimpleState(key=Arcturus, value=17.671" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# # RESULT
# echo "Passed $COUNT/$TOTAL Tests."
#
# if [ $COUNT == $TOTAL ]; then
# exit 0
# else
# exit 1
# fi
# working-directory: samples/corda/corda-simple-application
# FABRIC CLI
- name: Asset Transfer Fabric CLI Non-Fungible Tests
run: |
COUNT=0
TOTAL=8
# FABRIC2 - FABRIC1
./bin/fabric-cli asset transfer pledge --source-network=network1 --dest-network=network2 --recipient=bob --expiry-secs=3600 --type=bond --ref=a03 --data-file=src/data/assetsForTransfer.json &> tmp.out
tail -n 1 tmp.out | grep "Asset pledged with ID" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
CID=$(cat tmp.out | grep "Asset pledged with ID " | sed -e 's/Asset pledged with ID //')
# FABRIC1 - FABRIC2
./bin/fabric-cli asset transfer claim --source-network=network1 --dest-network=network2 --user=bob --owner=alice --type=bond.fabric --pledge-id=$CID --param=bond01:a03 &> tmp.out
tail -n 1 tmp.out | grep "Called Function ClaimRemoteAsset. With Args: $CID" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=alice mychannel simpleassettransfer ReadAsset '["bond01","a03"]' --local-network=network1 &> tmp.out
tail -n 2 tmp.out | grep "Error: the asset a03 does not exist" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=bob mychannel simpleassettransfer ReadAsset '["bond01","a03"]' --local-network=network2 &> tmp.out
#tail -n 1 tmp.out | grep "Result from network query: {\"type\":\"bond01\",\"id\":\"a03\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out | tr '\n' ' ' | grep "Result from network query: { \"type\": \"bond01\", \"id\": \"a03\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli asset transfer pledge --source-network=network1 --dest-network=network2 --recipient=bob --expiry-secs=20 --type=bond --ref=a04 --data-file=src/data/assetsForTransfer.json &> tmp.out
cat tmp.out
CID=$(cat tmp.out | grep "Asset pledged with ID " | sed -e 's/Asset pledged with ID //')
sleep 20
./bin/fabric-cli asset transfer claim --source-network=network1 --dest-network=network2 --user=bob --owner=alice --type=bond.fabric --pledge-id=$CID --param=bond01:a04 &> tmp.out
tail -n 1 tmp.out | grep "cannot claim asset with pledgeId $CID as the expiry time has elapsed" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli asset transfer reclaim --source-network=network1 --user=alice --type=bond.fabric --pledge-id=$CID --param=bond01:a04 &> tmp.out
tail -n 1 tmp.out | grep "Called Function ReclaimAsset. With Args: $CID" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=alice mychannel simpleassettransfer ReadAsset '["bond01","a04"]' --local-network=network1 &> tmp.out
#tail -n 1 tmp.out | grep "Result from network query: {\"type\":\"bond01\",\"id\":\"a04\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out | tr '\n' ' ' | grep "Result from network query: { \"type\": \"bond01\", \"id\": \"a04\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=bob mychannel simpleassettransfer ReadAsset '["bond01","a04"]' --local-network=network2 &> tmp.out
tail -n 2 tmp.out | grep "Error: the asset a04 does not exist" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
# RESULT
echo "Passed $COUNT/$TOTAL Tests."
if [ $COUNT == $TOTAL ]; then
exit 0
else
exit 1
fi
working-directory: samples/fabric/fabric-cli
# FABRIC CLI
- name: Asset Transfer Fabric CLI Fungible Tests
run: |
COUNT=0
TOTAL=8
# FABRIC2 - FABRIC1
./bin/fabric-cli asset transfer pledge --source-network=network1 --dest-network=network2 --recipient=bob --expiry-secs=3600 --type=token --units=50 --owner=alice --data-file=src/data/tokensForTransfer.json &> tmp.out
tail -n 1 tmp.out | grep "Asset pledged with ID" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
CID=$(cat tmp.out | grep "Asset pledged with ID " | sed -e 's/Asset pledged with ID //')
# FABRIC1 - FABRIC2
./bin/fabric-cli asset transfer claim --source-network=network1 --dest-network=network2 --user=bob --owner=alice --type=token.fabric --pledge-id=$CID --param=token1:50 &> tmp.out
tail -n 1 tmp.out | grep "Called Function ClaimRemoteTokenAsset. With Args: $CID" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=alice mychannel simpleassettransfer GetMyWallet '[]' --local-network=network1 &> tmp.out
tail -n 2 tmp.out | grep "Result from network query: token1=\"9950\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=bob mychannel simpleassettransfer GetMyWallet '[]' --local-network=network2 &> tmp.out
tail -n 2 tmp.out | grep "Result from network query: token1=\"50\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli asset transfer pledge --source-network=network1 --dest-network=network2 --recipient=bob --expiry-secs=20 --type=token --units=100 --owner=alice --data-file=src/data/tokensForTransfer.json &> tmp.out
cat tmp.out
CID=$(cat tmp.out | grep "Asset pledged with ID " | sed -e 's/Asset pledged with ID //')
sleep 20
./bin/fabric-cli asset transfer claim --source-network=network1 --dest-network=network2 --user=bob --owner=alice --type=token.fabric --pledge-id=$CID --param=token1:100 &> tmp.out
tail -n 1 tmp.out | grep "cannot claim asset with pledgeId $CID as the expiry time has elapsed" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli asset transfer reclaim --source-network=network1 --user=alice --type=token.fabric --pledge-id=$CID --param=token1:100 &> tmp.out
tail -n 1 tmp.out | grep "Called Function ReclaimTokenAsset. With Args: $CID" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=alice mychannel simpleassettransfer GetMyWallet '[]' --local-network=network1 &> tmp.out
tail -n 2 tmp.out | grep "Result from network query: token1=\"9950\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=bob mychannel simpleassettransfer GetMyWallet '[]' --local-network=network2 &> tmp.out
tail -n 2 tmp.out | grep "Result from network query: token1=\"50\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
# RESULT
echo "Passed $COUNT/$TOTAL Tests."
if [ $COUNT == $TOTAL ]; then
exit 0
else
exit 1
fi
working-directory: samples/fabric/fabric-cli
fabric-asset-transfer-local:
# if: ${{ false }}
# The type of runner that the job will run on
runs-on: ubuntu-latest
# Steps represent a sequence of tasks that will be executed as part of the job
steps:
# Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
- uses: actions/[email protected]
# - name: Set up JDK 8
# uses: actions/setup-java@v2
# with:
# java-version: '8'
# distribution: 'adopt'
- name: Set up Go
uses: actions/setup-go@v2
with:
go-version: '1.20.2'
- name: Use Node.js 18.x
uses: actions/setup-node@v2
with:
node-version: 18.x
- name: Install RUST Toolchain minimal stable with clippy and rustfmt
uses: actions-rs/toolchain@v1
with:
profile: minimal
toolchain: stable
components: rustfmt, clippy
- name: Get Latest Relay Dependencies
run: |
make protos-local
cargo update -p nom
cargo update -p lexical-core
working-directory: core/relay
- name: Use Protoc 3.15
run: |
curl -LO https://github.com/protocolbuffers/protobuf/releases/download/v3.15.6/protoc-3.15.6-linux-x86_64.zip
unzip protoc-3.15.6-linux-x86_64.zip -d protoc
go install google.golang.org/protobuf/cmd/protoc-gen-go@latest
go install google.golang.org/grpc/cmd/[email protected]
# PROTOS
- name: Build GO Protos
run: |
export PATH="$PATH:${GITHUB_WORKSPACE}/protoc/bin"
make build
working-directory: common/protos-go
# PROTOS
- name: Build JS Protos
run: |
export PATH="$PATH:${GITHUB_WORKSPACE}/protoc/bin"
make build
working-directory: common/protos-js
# - name: Build Java Protos
# run: make build
# working-directory: common/protos-java-kt
# Build Dependencies
# - name: Build Corda Interop App
# run: make build-local
# working-directory: core/network/corda-interop-app
#
# - name: Build Corda Interop SDK
# run: make build
# working-directory: sdks/corda
#
# - name: Build Corda SimpleApplication
# run: make build-local
# working-directory: samples/corda/corda-simple-application
- name: Build Fabric Interop SDK
run: make build-local
working-directory: sdks/fabric/interoperation-node-sdk
- name: Build Fabric CLI
run: make build-local
working-directory: samples/fabric/fabric-cli
- name: Build Relay
run: make
working-directory: core/relay
- name: Build Fabric Driver
run: make build-local
working-directory: core/drivers/fabric-driver
- name: Build IIN Agent
run: make build-local
working-directory: core/identity-management/iin-agent
# - name: Build Corda Driver
# run: make build-local
# working-directory: core/drivers/corda-driver
#
# # CORDA NETWORK
# - name: Start Corda Network
# run: |
# sed -i "/docker logs corda_partya_1 -f/"' s/^/#/' "scripts/start-nodes.sh"
# make start-local &> corda-net.out &
# working-directory: tests/network-setups/corda
# FABRIC NETWORK
- name: Start Fabric Network
run: make start-interop-local CHAINCODE_NAME=simpleassettransfer
working-directory: tests/network-setups/fabric/dev
# - name: Corda Network logs
# run: |
# cat tests/network-setups/corda/corda-net.out
# docker logs corda_partya_1
# RELAY
- name: Start Relay for network1
run: RELAY_CONFIG=config/Fabric_Relay.toml cargo run --bin server &> relay-n1.out &
working-directory: core/relay
- name: Start Relay for network2
run: RELAY_CONFIG=config/Fabric_Relay2.toml cargo run --bin server &> relay-n2.out &
working-directory: core/relay
# - name: Start Relay for Corda_Network
# run: RELAY_CONFIG=config/Corda_Relay.toml cargo run --bin server &> relay-corda.out &
# working-directory: core/relay
#
# - name: Start Relay for Corda_Network2
# run: RELAY_CONFIG=config/Corda_Relay2.toml cargo run --bin server &> relay-corda2.out &
# working-directory: core/relay
# FABRIC DRIVER
- name: Setup Fabric Driver .env
run: |
cp .env.template .env
CCP_PATH=${GITHUB_WORKSPACE}/tests/network-setups/fabric/shared/network1/peerOrganizations/org1.network1.com/connection-org1.json
sed -i "s#path_to_connection_profile#${CCP_PATH}#g" .env
working-directory: core/drivers/fabric-driver
- name: Start Fabric Driver for network1
run: npm run dev &> fdriver-n1.out &
working-directory: core/drivers/fabric-driver
- name: Start Fabric Driver for network2
run: CONNECTION_PROFILE=${GITHUB_WORKSPACE}/tests/network-setups/fabric/shared/network2/peerOrganizations/org1.network2.com/connection-org1.json NETWORK_NAME=network2 RELAY_ENDPOINT=localhost:9083 DRIVER_ENDPOINT=localhost:9095 npm run dev &> fdriver-n2.out &
working-directory: core/drivers/fabric-driver
# IIN AGENT
- name: Setup Fabric IIN Config
run: |
# FABRIC CONFIG
cp src/fabric-ledger/config.json.template src/fabric-ledger/config-n1.json
CCP_PATH=${GITHUB_WORKSPACE}/tests/network-setups/fabric/shared/network1/peerOrganizations/org1.network1.com/connection-org1.json
sed -i "s#<path-to-connection-profile>#${CCP_PATH}#g" src/fabric-ledger/config-n1.json
cat src/fabric-ledger/config-n1.json
cp src/fabric-ledger/config.json.template src/fabric-ledger/config-n2.json
CCP_PATH=${GITHUB_WORKSPACE}/tests/network-setups/fabric/shared/network2/peerOrganizations/org1.network2.com/connection-org1.json
sed -i "s#<path-to-connection-profile>#${CCP_PATH}#g" src/fabric-ledger/config-n2.json
cat src/fabric-ledger/config-n2.json
# DNS CONFIG
sed -i "s#iin-agent-Org1MSP-network1#localhost#g" docker-testnet/configs/dnsconfig.json
sed -i "s#iin-agent-Org1MSP-network2#localhost#g" docker-testnet/configs/dnsconfig.json
cat docker-testnet/configs/dnsconfig.json
working-directory: core/identity-management/iin-agent
- name: Setup Fabric IIN Env
run: |
cp .env.template .env
sed -i "s#<name-of-iin-agent/org-name>#Org1MSP#g" .env
sed -i "s#^DLT_TYPE=.*#DLT_TYPE=fabric#g" .env
sed -i "s#<weaver-contract-name>#interop#g" .env
sed -i "s#^DNS_CONFIG_PATH=#DNS_CONFIG_PATH=./docker-testnet/configs/dnsconfig.json#g" .env
sed -i "s#^SECURITY_DOMAIN_CONFIG_PATH=#SECURITY_DOMAIN_CONFIG_PATH=./docker-testnet/configs/security-domain-config.json#g" .env
sed -i "s#^CONFIG_PATH=#CONFIG_PATH=./src/fabric-ledger/config-n1.json#g" .env
sed -i "s#^AUTO_SYNC=#AUTO_SYNC=false#g" .env
cat .env
working-directory: core/identity-management/iin-agent
- name: Start Fabric IIN Agent for network1
run: npm run dev &> iinagent-n1.out &
working-directory: core/identity-management/iin-agent
- name: Start Fabric IIN Agent for network2
run: IIN_AGENT_ENDPOINT=localhost:9501 SECURITY_DOMAIN=network2 CONFIG_PATH=./src/fabric-ledger/config-n2.json npm run dev &> iinagent-n2.out &
working-directory: core/identity-management/iin-agent
# # CORDA DRIVER
# - name: Start Corda_Network Driver
# run: ./build/install/corda-driver/bin/corda-driver &> corda-driver.out &
# working-directory: core/drivers/corda-driver
#
# - name: Start Corda_Network2 Driver
# run: DRIVER_PORT=9098 ./build/install/corda-driver/bin/corda-driver &> corda2-driver.out &
# working-directory: core/drivers/corda-driver
# FABRIC CLI
- name: Setup Fabric CLI ENV
run: |
echo ${GITHUB_WORKSPACE}
cp .env.template .env
./bin/fabric-cli env set-file ./.env
./bin/fabric-cli env set MEMBER_CREDENTIAL_FOLDER ${GITHUB_WORKSPACE}/samples/fabric/fabric-cli/src/data/credentials
./bin/fabric-cli env set CONFIG_PATH ${GITHUB_WORKSPACE}/samples/fabric/fabric-cli/config.json
./bin/fabric-cli env set DEFAULT_APPLICATION_CHAINCODE simpleassettransfer
./bin/fabric-cli env set REMOTE_CONFIG_PATH ${GITHUB_WORKSPACE}/samples/fabric/fabric-cli/remote-network-config.json
./bin/fabric-cli env set CHAINCODE_PATH ${GITHUB_WORKSPACE}/samples/fabric/fabric-cli/chaincode.json
cat .env
working-directory: samples/fabric/fabric-cli
- name: Setup Fabric CLI Config
run: |
echo ${GITHUB_WORKSPACE}
cp config.template.json config.json
sed -i "s#<PATH-TO-WEAVER>#${GITHUB_WORKSPACE}#g" config.json
###### Change line number in following commands if config is modified #####
./bin/fabric-cli config set network2 aclPolicyPrincipalType ca
./bin/fabric-cli config set network1 chaincode simpleassettransfer
./bin/fabric-cli config set network2 chaincode simpleassettransfer
cp chaincode.json.template chaincode.json
cp remote-network-config.json.template remote-network-config.json
working-directory: samples/fabric/fabric-cli
- name: Fabric CLI Init
run: |
./bin/fabric-cli configure create all --local-network=network1
./bin/fabric-cli configure create all --local-network=network2
./bin/fabric-cli configure network --local-network=network1
./bin/fabric-cli configure network --local-network=network2
./scripts/initAssetsForTransfer.sh
working-directory: samples/fabric/fabric-cli
- name: Fabric Sync Membership using IIN Agent
run: |
./bin/fabric-cli configure membership --local-network=network1 --target-network=network2 --iin-agent-endpoint=localhost:9500
sleep 10
tail -10 ../../../core/identity-management/iin-agent/iinagent-n1.out
./bin/fabric-cli configure membership --local-network=network2 --target-network=network1 --iin-agent-endpoint=localhost:9501
sleep 10
tail -10 ../../../core/identity-management/iin-agent/iinagent-n2.out
working-directory: samples/fabric/fabric-cli
# # CORDA CLIENT
# - name: Corda CLI Initialize Vault
# run: make initialise-vault
# working-directory: samples/corda/corda-simple-application
#
# - name: Data Transfer Corda Client Tests
# run: |
# COUNT=0
# TOTAL=8
#
# # CORDA-CORDA2
# ./clients/build/install/clients/bin/clients request-state localhost:9081 localhost:9082/Corda_Network2/localhost:30006#com.cordaSimpleApplication.flow.GetStateByKey:H 1> tmp.out
# cat tmp.out | grep "SimpleState(key=H, value=\[SimpleState(key=H, value=1" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# ./clients/build/install/clients/bin/clients get-state H 1> tmp.out
# cat tmp.out | grep "SimpleState(key=H, value=\[SimpleState(key=H, value=1" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# # CORDA2-CORDA
#
# NETWORK_NAME=Corda_Network2 CORDA_PORT=30006 ./clients/build/install/clients/bin/clients request-state localhost:9082 localhost:9081/Corda_Network/localhost:10006#com.cordaSimpleApplication.flow.GetStateByKey:C 1> tmp.out
# cat tmp.out | grep "SimpleState(key=C, value=\[SimpleState(key=C, value=20" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# NETWORK_NAME=Corda_Network2 CORDA_PORT=30006 ./clients/build/install/clients/bin/clients get-state C 1> tmp.out
# cat tmp.out | grep "SimpleState(key=C, value=\[SimpleState(key=C, value=20" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# # CORDA - FABRIC1
# ./clients/build/install/clients/bin/clients request-state localhost:9081 localhost:9080/network1/mychannel:simplestate:Read:a 1> tmp.out
# cat tmp.out | grep "SimpleState(key=a, value=Arcturus" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# ./clients/build/install/clients/bin/clients get-state a 1> tmp.out
# cat tmp.out | grep "SimpleState(key=a, value=Arcturus" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# # CORDA - FABRIC2
# ./clients/build/install/clients/bin/clients request-state localhost:9081 localhost:9083/network2/mychannel:simplestate:Read:Arcturus 1> tmp.out
# cat tmp.out | grep "SimpleState(key=Arcturus, value=17.671" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# ./clients/build/install/clients/bin/clients get-state Arcturus 1> tmp.out
# cat tmp.out | grep "SimpleState(key=Arcturus, value=17.671" && COUNT=$(( COUNT + 1 )) && echo "PASS"
# cat tmp.out
#
# # RESULT
# echo "Passed $COUNT/$TOTAL Tests."
#
# if [ $COUNT == $TOTAL ]; then
# exit 0
# else
# exit 1
# fi
# working-directory: samples/corda/corda-simple-application
# FABRIC CLI
- name: Asset Transfer Fabric CLI Non-Fungible Tests
run: |
COUNT=0
TOTAL=8
# FABRIC2 - FABRIC1
./bin/fabric-cli asset transfer pledge --source-network=network1 --dest-network=network2 --recipient=bob --expiry-secs=3600 --type=bond --ref=a03 --data-file=src/data/assetsForTransfer.json &> tmp.out
tail -n 1 tmp.out | grep "Asset pledged with ID" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
CID=$(cat tmp.out | grep "Asset pledged with ID " | sed -e 's/Asset pledged with ID //')
# FABRIC1 - FABRIC2
./bin/fabric-cli asset transfer claim --source-network=network1 --dest-network=network2 --user=bob --owner=alice --type=bond.fabric --pledge-id=$CID --param=bond01:a03 &> tmp.out
tail -n 1 tmp.out | grep "Called Function ClaimRemoteAsset. With Args: $CID" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=alice mychannel simpleassettransfer ReadAsset '["bond01","a03"]' --local-network=network1 &> tmp.out
tail -n 2 tmp.out | grep "Error: the asset a03 does not exist" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=bob mychannel simpleassettransfer ReadAsset '["bond01","a03"]' --local-network=network2 &> tmp.out
#tail -n 1 tmp.out | grep "Result from network query: {\"type\":\"bond01\",\"id\":\"a03\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out | tr '\n' ' ' | grep "Result from network query: { \"type\": \"bond01\", \"id\": \"a03\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli asset transfer pledge --source-network=network1 --dest-network=network2 --recipient=bob --expiry-secs=20 --type=bond --ref=a04 --data-file=src/data/assetsForTransfer.json &> tmp.out
cat tmp.out
CID=$(cat tmp.out | grep "Asset pledged with ID " | sed -e 's/Asset pledged with ID //')
sleep 20
./bin/fabric-cli asset transfer claim --source-network=network1 --dest-network=network2 --user=bob --owner=alice --type=bond.fabric --pledge-id=$CID --param=bond01:a04 &> tmp.out
tail -n 1 tmp.out | grep "cannot claim asset with pledgeId $CID as the expiry time has elapsed" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli asset transfer reclaim --source-network=network1 --user=alice --type=bond.fabric --pledge-id=$CID --param=bond01:a04 &> tmp.out
tail -n 1 tmp.out | grep "Called Function ReclaimAsset. With Args: $CID" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=alice mychannel simpleassettransfer ReadAsset '["bond01","a04"]' --local-network=network1 &> tmp.out
#tail -n 1 tmp.out | grep "Result from network query: {\"type\":\"bond01\",\"id\":\"a04\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out | tr '\n' ' ' | grep "Result from network query: { \"type\": \"bond01\", \"id\": \"a04\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=bob mychannel simpleassettransfer ReadAsset '["bond01","a04"]' --local-network=network2 &> tmp.out
tail -n 2 tmp.out | grep "Error: the asset a04 does not exist" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
# RESULT
echo "Passed $COUNT/$TOTAL Tests."
if [ $COUNT == $TOTAL ]; then
exit 0
else
exit 1
fi
working-directory: samples/fabric/fabric-cli
# FABRIC CLI
- name: Asset Transfer Fabric CLI Fungible Tests
run: |
COUNT=0
TOTAL=8
# FABRIC2 - FABRIC1
./bin/fabric-cli asset transfer pledge --source-network=network1 --dest-network=network2 --recipient=bob --expiry-secs=3600 --type=token --units=50 --owner=alice --data-file=src/data/tokensForTransfer.json &> tmp.out
tail -n 1 tmp.out | grep "Asset pledged with ID" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
CID=$(cat tmp.out | grep "Asset pledged with ID " | sed -e 's/Asset pledged with ID //')
# FABRIC1 - FABRIC2
./bin/fabric-cli asset transfer claim --source-network=network1 --dest-network=network2 --user=bob --owner=alice --type=token.fabric --pledge-id=$CID --param=token1:50 &> tmp.out
tail -n 1 tmp.out | grep "Called Function ClaimRemoteTokenAsset. With Args: $CID" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=alice mychannel simpleassettransfer GetMyWallet '[]' --local-network=network1 &> tmp.out
tail -n 2 tmp.out | grep "Result from network query: token1=\"9950\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=bob mychannel simpleassettransfer GetMyWallet '[]' --local-network=network2 &> tmp.out
tail -n 2 tmp.out | grep "Result from network query: token1=\"50\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli asset transfer pledge --source-network=network1 --dest-network=network2 --recipient=bob --expiry-secs=20 --type=token --units=100 --owner=alice --data-file=src/data/tokensForTransfer.json &> tmp.out
cat tmp.out
CID=$(cat tmp.out | grep "Asset pledged with ID " | sed -e 's/Asset pledged with ID //')
sleep 20
./bin/fabric-cli asset transfer claim --source-network=network1 --dest-network=network2 --user=bob --owner=alice --type=token.fabric --pledge-id=$CID --param=token1:100 &> tmp.out
tail -n 1 tmp.out | grep "cannot claim asset with pledgeId $CID as the expiry time has elapsed" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli asset transfer reclaim --source-network=network1 --user=alice --type=token.fabric --pledge-id=$CID --param=token1:100 &> tmp.out
tail -n 1 tmp.out | grep "Called Function ReclaimTokenAsset. With Args: $CID" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=alice mychannel simpleassettransfer GetMyWallet '[]' --local-network=network1 &> tmp.out
tail -n 2 tmp.out | grep "Result from network query: token1=\"9950\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
./bin/fabric-cli chaincode query --user=bob mychannel simpleassettransfer GetMyWallet '[]' --local-network=network2 &> tmp.out
tail -n 2 tmp.out | grep "Result from network query: token1=\"50\"" && COUNT=$(( COUNT + 1 )) && echo "PASS"
cat tmp.out
# RESULT
echo "Passed $COUNT/$TOTAL Tests."
if [ $COUNT == $TOTAL ]; then
exit 0
else
exit 1
fi
working-directory: samples/fabric/fabric-cli