feat: add lua_cjson module

deps/luajit/src/Makefile

@@ -451,7 +451,8 @@ LJVM_BOUT= $(LJVM_S)
 LJVM_MODE= elfasm
 
 LJLIB_O= lib_base.o lib_math.o lib_bit.o lib_string.o lib_table.o \
-	 lib_io.o lib_os.o lib_package.o lib_debug.o lib_jit.o lib_ffi.o
+	 lib_io.o lib_os.o lib_package.o lib_debug.o lib_jit.o lib_ffi.o \
+   lua_cjson.o strbuf.o fpconv.o
 LJLIB_C= $(LJLIB_O:.o=.c)
 
 LJCORE_O= lj_gc.o lj_err.o lj_char.o lj_bc.o lj_obj.o \

deps/luajit/src/fpconv.c

@@ -0,0 +1,205 @@
+/* fpconv - Floating point conversion routines
+ *
+ * Copyright (c) 2011-2012  Mark Pulford <[email protected]>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* JSON uses a '.' decimal separator. strtod() / sprintf() under C libraries
+ * with locale support will break when the decimal separator is a comma.
+ *
+ * fpconv_* will around these issues with a translation buffer if required.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <assert.h>
+#include <string.h>
+
+#include "fpconv.h"
+
+/* Lua CJSON assumes the locale is the same for all threads within a
+ * process and doesn't change after initialisation.
+ *
+ * This avoids the need for per thread storage or expensive checks
+ * for call. */
+static char locale_decimal_point = '.';
+
+/* In theory multibyte decimal_points are possible, but
+ * Lua CJSON only supports UTF-8 and known locales only have
+ * single byte decimal points ([.,]).
+ *
+ * localconv() may not be thread safe (=>crash), and nl_langinfo() is
+ * not supported on some platforms. Use sprintf() instead - if the
+ * locale does change, at least Lua CJSON won't crash. */
+static void fpconv_update_locale()
+{
+    char buf[8];
+
+    snprintf(buf, sizeof(buf), "%g", 0.5);
+
+    /* Failing this test might imply the platform has a buggy dtoa
+     * implementation or wide characters */
+    if (buf[0] != '0' || buf[2] != '5' || buf[3] != 0) {
+        fprintf(stderr, "Error: wide characters found or printf() bug.");
+        abort();
+    }
+
+    locale_decimal_point = buf[1];
+}
+
+/* Check for a valid number character: [-+0-9a-yA-Y.]
+ * Eg: -0.6e+5, infinity, 0xF0.F0pF0
+ *
+ * Used to find the probable end of a number. It doesn't matter if
+ * invalid characters are counted - strtod() will find the valid
+ * number if it exists.  The risk is that slightly more memory might
+ * be allocated before a parse error occurs. */
+static inline int valid_number_character(char ch)
+{
+    char lower_ch;
+
+    if ('0' <= ch && ch <= '9')
+        return 1;
+    if (ch == '-' || ch == '+' || ch == '.')
+        return 1;
+
+    /* Hex digits, exponent (e), base (p), "infinity",.. */
+    lower_ch = ch | 0x20;
+    if ('a' <= lower_ch && lower_ch <= 'y')
+        return 1;
+
+    return 0;
+}
+
+/* Calculate the size of the buffer required for a strtod locale
+ * conversion. */
+static int strtod_buffer_size(const char *s)
+{
+    const char *p = s;
+
+    while (valid_number_character(*p))
+        p++;
+
+    return p - s;
+}
+
+/* Similar to strtod(), but must be passed the current locale's decimal point
+ * character. Guaranteed to be called at the start of any valid number in a string */
+double fpconv_strtod(const char *nptr, char **endptr)
+{
+    char localbuf[FPCONV_G_FMT_BUFSIZE];
+    char *buf, *endbuf, *dp;
+    int buflen;
+    double value;
+
+    /* System strtod() is fine when decimal point is '.' */
+    if (locale_decimal_point == '.')
+        return strtod(nptr, endptr);
+
+    buflen = strtod_buffer_size(nptr);
+    if (!buflen) {
+        /* No valid characters found, standard strtod() return */
+        *endptr = (char *)nptr;
+        return 0;
+    }
+
+    /* Duplicate number into buffer */
+    if (buflen >= FPCONV_G_FMT_BUFSIZE) {
+        /* Handle unusually large numbers */
+        buf = (char *)malloc(buflen + 1);
+        if (!buf) {
+            fprintf(stderr, "Out of memory");
+            abort();
+        }
+    } else {
+        /* This is the common case.. */
+        buf = localbuf;
+    }
+    memcpy(buf, nptr, buflen);
+    buf[buflen] = 0;
+
+    /* Update decimal point character if found */
+    dp = strchr(buf, '.');
+    if (dp)
+        *dp = locale_decimal_point;
+
+    value = strtod(buf, &endbuf);
+    *endptr = (char *)&nptr[endbuf - buf];
+    if (buflen >= FPCONV_G_FMT_BUFSIZE)
+        free(buf);
+
+    return value;
+}
+
+/* "fmt" must point to a buffer of at least 6 characters */
+static void set_number_format(char *fmt, int precision)
+{
+    int d1, d2, i;
+
+    assert(1 <= precision && precision <= 14);
+
+    /* Create printf format (%.14g) from precision */
+    d1 = precision / 10;
+    d2 = precision % 10;
+    fmt[0] = '%';
+    fmt[1] = '.';
+    i = 2;
+    if (d1) {
+        fmt[i++] = '0' + d1;
+    }
+    fmt[i++] = '0' + d2;
+    fmt[i++] = 'g';
+    fmt[i] = 0;
+}
+
+/* Assumes there is always at least 32 characters available in the target buffer */
+int fpconv_g_fmt(char *str, double num, int precision)
+{
+    char buf[FPCONV_G_FMT_BUFSIZE];
+    char fmt[6];
+    int len;
+    char *b;
+
+    set_number_format(fmt, precision);
+
+    /* Pass through when decimal point character is dot. */
+    if (locale_decimal_point == '.')
+        return snprintf(str, FPCONV_G_FMT_BUFSIZE, fmt, num);
+
+    /* snprintf() to a buffer then translate for other decimal point characters */
+    len = snprintf(buf, FPCONV_G_FMT_BUFSIZE, fmt, num);
+
+    /* Copy into target location. Translate decimal point if required */
+    b = buf;
+    do {
+        *str++ = (*b == locale_decimal_point ? '.' : *b);
+    } while(*b++);
+
+    return len;
+}
+
+void fpconv_init()
+{
+    fpconv_update_locale();
+}
+
+/* vi:ai et sw=4 ts=4:
+ */

deps/luajit/src/fpconv.h

@@ -0,0 +1,22 @@
+/* Lua CJSON floating point conversion routines */
+
+/* Buffer required to store the largest string representation of a double.
+ *
+ * Longest double printed with %.14g is 21 characters long:
+ * -1.7976931348623e+308 */
+# define FPCONV_G_FMT_BUFSIZE   32
+
+#ifdef USE_INTERNAL_FPCONV
+static inline void fpconv_init()
+{
+    /* Do nothing - not required */
+}
+#else
+extern void fpconv_init();
+#endif
+
+extern int fpconv_g_fmt(char*, double, int);
+extern double fpconv_strtod(const char*, char**);
+
+/* vi:ai et sw=4 ts=4:
+ */