Skip to content

A wrapper for the SPEC CPU2017 benchmark suite.

Notifications You must be signed in to change notification settings

donggyukim/Speckle-2017

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

56 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

** SPEC2017 Port **

This branch is a WIP and changes Speckle's usage model. It removes run support, and makes the copy mode the default.

Key changes:

  • Host and Target configurations are provided.
  • A target SPEC2017 build is done to generate target binaries
  • A host SPEC2017 runsetup is done to complete generate a working directories for each benchmark.
  • The host directory is copyied to the overlay directory, host binaries are replaced with target binaries
  • A run script(run.sh) is generated that executes all the inputs for the benchmark

All of the following sections of the README may be out of date.

Purpose

The goal of this repository is to help you compile and run SPEC. This will NOT verify the output of SPEC.

Requirements

  • you must have your own copy of SPEC CPU2006 v1.2.
  • you must have built the tools in SPEC CPU2006 v1.2 (see below for help).

Details

We will compile the binaries "in vivo", calling into the actual SPEC CPU2006 directory. Once completed, the binaries are copied into this directory (./build).

The reasoning is that compiling the benchmarks is complicated and difficult (so why redo that effort?), but we want better control over executing the binaries. Of course, we are forgoing the validation and results building infrastructure of SPEC.

Setup

  • set the $SPEC_DIR variable in your environment to point to your copy of CPU2006-1.2.
  • modify Speckle/riscv.cfg as desired. It will get copied over to $SPEC_DIR/configs when compiling the benchmarks.
  • modify the BENCHMARKS variable in gen_binaries.sh as required to set which benchmarks you would like to compile and run.
  • modify the RUN variable in gen_binaries.sh as required to set how you would like to run the binaries (e.g., RUN="spike pk" to run on the Spike ISA simulator).

To compile binaries

    ./gen_binaries.sh --compile

You only need to compile SPEC once for a given SPEC input ("test", "train", "ref"). It should take about a minute.

To run binaries

    ./gen_binaries.sh --run

However, this only runs the binaries as specified by the $RUN variable in gen_binaries.sh, and it is running them via the symlinked directories in build/.

Building (and running) the binaries from a portable directory

By default, benchmarks are compiled and then symlinked into build/. However, for portability reasons, you can use:

     ./gen_binaries.sh --compile --copy

This will copy all the input files and binaries into a new directory (named after your CONFIG file and the INPUT size). This directory will contain a run.sh script and the commands/ directory needed to run SPEC anywhere!

Modify the generated "./${CONFIG}-spec-{$INPUT}/run.sh" script as required to run the binaries in your new environment.

TODO

  • add in training input set
  • provide input parameter control over the type and set of SPEC benchmarks built (e.g., currently requires manual hacking to build SPECInt vs SPECFP)
  • store output generated by SPEC into a separate /output directory

Known Issues

  • Currently, the riscv-pk does not support one of the perlbench.test workloads. This is because it calls the fork syscall, which is not supported by riscv-pk.
  • Currently, the riscv-pk exhibits errors on some of the reference input sets (it is reccommended that you use Linux instead).

Building SPEC Tools

These are the instructions that I had to follow to build the CPU2006 v1.2 tools from scratch on Intel amd64 machines running Ubuntu.

First, you can try:

    cd $SPEC_DIR/
    ./install.sh

Hopefully that works.

Building SPEC Tools: The Hard Way

If the Easy Way does not work, you can also try installing the tools from scratch. What follows is a method that worked for me.

Begin by creating a script (my_setup.sh) in cpu2006-1.2/tools/src with the following code:

    #!/bin/bash
    PERLFLAGS=-Uplibpth=
    for i in `gcc -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' '\n' | grep -v /gcc`; do
        PERLFLAGS="$PERLFLAGS -Aplibpth=$i"
    done
    export PERLFLAGS
    echo $PERLFLAGS
    export PATH=$PATH:/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin

Then:

    cd cpu2006-1.2/tools/src
    source my_setup.sh
    ./buildtools

About

A wrapper for the SPEC CPU2017 benchmark suite.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Shell 73.5%
  • Batchfile 26.5%