Skip to content

bramoosterhuis/Raspberry

 
 

Repository files navigation

Wiring the NRF24

GND	  25
VCC	  17
CE	  22
CSN   24
SCK   23
MOSI  19
MISO  21
IRQ	  --

Building Serial Gateway

The standard configuration will build the Serial Gateway with a tty name of
'/dev/ttyMySensorsGateway' and PTS group ownership of 'tty' the PTS will be group read 
and write. The default install location will be /usr/local/sbin. If you want to change
that edit the variables in the head of the Makefile.

First build the librf24-bcm library

- Change to librf24-bcm
- make all
- sudo make install

Build the Gateway

- change back to Raspberry Dir
- make all
- sudo make install
- (if you want to start daemon at boot) sudo make enable-gwserial

For some controllers a more recognisable name needs to be used: e.g. /dev/ttyUSB020 (check if this is free).

sudo ln -s /dev/ttyMySensorsGateway /dev/ttyUSB20

To automatically create the link on startup, add
ln -s /dev/ttyMySensorsGateway /dev/ttyUSB20
just before
exit0
in /etc/rc.local


Uninstalling 

- change to Raspberry Dir
- sudo make uninstall

Support: http://forum.mysensors.org

About

MySensors Raspberry Port

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 79.1%
  • C 15.8%
  • Shell 2.7%
  • Makefile 2.4%