C System Calls

• Overview
• Getting Started
• File Disemvowel
  • Standard Input -> Standard Output
  • File -> Standard Output
  • File -> File
  • Test scripts and design suggestions
• Summarizing Directories
  • C using stat()
    • Static variables as "fields"
    • Calling stat()
    • Reading Directories
    • Checking for Errors
  • C using ftw()
  • The shell using find
• To do

Overview

This repository contains the starter code and tests for the "C system calls" lab. The primary goal of this lab is to gain some experience with (Unix) (file) system calls in C, and compare these to using the shell.

For this lab, you will need to have (or develop) some familiarity with several C programming concepts, including:

• Using command line arguments
• Using 2-Dimensional arrays
• Basics of file-system calls, including standard input (stdin) and standard output (stdout)
• Using stat()
• Using struct

For comparison, we will also use shell commands to traverse directories.

To accomplish these goals, you will work on solving two distinct problems, both of which illustrate how we interact with the file system from (C) programs. The first is revisiting an old friend (dihttps://github.com/UMM-CSci-Systems/C-traversing-directories/blob/master/README.md#reading-directoriessemvowel from a previous C Lab), but this time we disemvowel entire files instead of single lines. The second is three different solutions to the problem of summarizing files; two solutions will be in C and one uses shell commands.

Getting started

There are two directories in the repository, one for each of the two major parts of this lab. We would recommend doing them in the order listed below; there's no overwhelming reason that you need to do them in any particular order, however, and it would be far better to move on to the next one rather than get buried in one and not make any progress.

---

File disemvowel

This is an extension of the disemvoweling exercise from a previous C Lab. Here you should write a program that disemvowels an entire file, reading from standard input or a file specified on the command line, and writing to standard output or to a file specified on the command line.

It's common for command line utilities to be very flexible in how they handle both input and output. This allows them to be easily used as both "stand alone" utilities, and as combined with other programs using pipes. To illustrate what that looks like from a programmer's standpoint, you'll write a program file_disemvowel that can be called in all of the following ways:

Read from standard input, write to standard output

$ ./file_disemvowel
Some text
consisting of 2 lines.
^D
Sm txt 
cnsstng f 2 lns.

Note that we can also use I/O redirection and pipes to modify standard input and standard output:

$ cat small_input
Vulcan once stood proud here,
until he spewed his parts from his dirty mouth,
shattering his body and the land alike.
-- Thomas McPhee, 20 Jul 2010
$ ./file_disemvowel < small_input > /tmp/output
$ cat /tmp/output
Vlcn nc std prd hr,
ntl h spwd hs prts frm hs drty mth,
shttrng hs bdy nd th lnd lk.
-- Thms McPh, 20 Jl 2010

Read from a file, write to standard output

Your program should be able to take a single command line argument that is interpreted as the name of the file to be disemvoweled. The output will then go to standard output.

$ cat small_input
Vulcan once stood proud here,
until he spewed his parts from his dirty mouth,
shattering his body and the land alike.
-- Thomas McPhee, 20 Jul 2010
$ ./file_disemvowel small_input
Vlcn nc std prd hr,
ntl h spwd hs prts frm hs drty mth,
shttrng hs bdy nd th lnd lk.
-- Thms McPh, 20 Jl 2010

Read from a file, write to a file

If your program is provided with two command line arguments, it should interpret the first as the input file and the second as the file where the output should be written.

$ cat small_input
Vulcan once stood proud here,
until he spewed his parts from his dirty mouth,
shattering his body and the land alike.
-- Thomas McPhee, 20 Jul 2010
$ ./file_disemvowel small_input /tmp/output
$ cat /tmp/output
Vlcn nc std prd hr,
ntl h spwd hs prts frm hs drty mth,
shttrng hs bdy nd th lnd lk.
-- Thms McPh, 20 Jl 2010

Test scripts and design suggestions

The directory file_disemvowel/tests has a bats test script (file_disemvowel_test.bats) and some test data. You want to start by trying to get those tests to pass at a minimum but, as always, we make no guarantees that those tests are in any way complete enough to ensure correctness. To run the tests enter

bats tests/file_disemvowel_test.bats

in the file_disemvowel directory.

The basic structure of our solution is

#include <stdio.h>
#include <stdbool.h>

#define BUF_SIZE 1024

bool is_vowel(char c) { 
    /* 
     * Returns true if c is a vowel (upper or lower case), and 
     * false otherwise. 
     */ 
}

int copy_non_vowels(int num_chars, char* in_buf, char* out_buf) {
    /*
     * Copy all the non-vowels from in_buf to out_buf. 
     * num_chars indicates how many characters are in in_buf, 
     * and this function should return the number of non-vowels that
     * that were copied over.
     */
}

void disemvowel(FILE* inputFile, FILE* outputFile) { 
    /*
     * Copy all the non-vowels from inputFile to outputFile.
     * Create input and output buffers, and use fread() to repeatedly read
     * in a buffer of data, copy the non-vowels to the output buffer, and
     * use fwrite to write that out. 
     */
}

int main(int argc, char *argv[]) { 
    FILE *inputFile; 
    FILE *outputFile;

    // Code that processes the command line arguments 
    // and sets up inputFile and outputFile.

    disemvowel(inputFile, outputFile);

    return 0; 
}

A few comments:

• We've used #define to create a named constant which we used for the size of the two buffers in the function disemvowel().
• Rather than using the very low-level I/O tools open(), read(), and write(), we recommend using the slightly higher level tools fopen(), fread(), and fwrite(), as they're more like what you'd actually use in a text-processing program like this. You'll want to look at the man pages for fopen(), fread(), and fwrite() for the details, and definitely ask questions if you're not sure what's going on there.
• This uses command line arguments in C. You probably want to start by just reading standard input and writing to standard input, as that allows you to initially ignore the command line arguments and focus on the file operations; once you get that right, you should pass the first of the three tests. When that's done that you can start worrying about the command line arguments. There are lots of on-line resources for handling command line arguments in C, e.g., in the wikibook A Little C Primer.

‼️ Until you get the command line argument handling working, the last two tests are likely to hang indefinitely waiting for you to close standard input. Both those tests are marked as skip to prevent them from hanging when you first start the project. You need to make sure to remove (or comment out) the skip lines when think you have command line argument processing working. Otherwise your handling of command line arguments won't actually be tested.

---

Summarizing directories

Here's where we'll generate several different solutions to the same problem, two in C (using different system tools), and one using shell commands. The problem we're solving in each case is to write a program that takes a single command line argument and looks at every file and directory from there down (in sub-directories, sub-sub-directories, etc.) and summarizes how many directories it finds and how many regular files (non-directories) it finds. The output should look like:

Processed all the files from <test_data/loads_o_files/>.
There were 1112 directories.
There were 10001 regular files.

There is a test script in summarize_tree_test.bats that will only pass when all three programs exist and work using these names:

• summarize_tree
• summarize_tree_ftw
• summarize_tree.sh

The two files test_data/small_dir_sizes and test_data/large_dir_sizes in the repo are necessary for the tests to pass; you shouldn't remove or change them.

Remember to also use valgrind to look for memory leaks in both your C versions.

‼️ Before working on this you should expand the test_data.tgz tar archive. This contains large collections of test directories and files (over 10,000 files) that we keep compressed in the repository so we don't burden Github (and you) with pushing and pulling these large collections of files. So execute

cd test_data
tar -zxf test_data.tgz

That should give you two directories: loads_o_files and fewer_files. The former is a large directory structure with thousands of files and directories. The latter is a smaller subset. The tests assume those directories exist and won't pass unless they do.

C using stat()

We'll start with a "traditional" C solution using the stat() and readdir() library functions. We've given you a substantial stub for this in summarize_tree/summarize_tree.c which is also included below:

#include <stdio.h>
#include <sys/stat.h> 
#include <stdbool.h> 
#include <stdlib.h>
#include <dirent.h> 
#include <unistd.h>
#include <string.h>

static int num_dirs, num_regular;

bool is_dir(const char* path) { 
    /*
     * Use the stat() function (try "man 2 stat") to determine if the file
     * referenced by path is a directory or not. Call stat, and then use
     * S_ISDIR to see if the file is a directory. Make sure you check the
     * return value from stat in case there is a problem, e.g., maybe the
     * the file doesn't actually exist. 
     *
     * You'll need to allocate memory for a buffer you pass to stat(); make
     * sure you free up that space before you return from this function or
     * you'll have a substantial memory leak (think of how many times this
     * will be called!).
     */
}

/* 
 * This is necessary this because the multiple recursion means there's no way to 
 * order them so that all the functions are defined before they're called.
 */ 
void process_path(const char**);

void process_directory(const char* path) { 
    /*
     * Update the number of directories seen, use opendir() to open the
     * directory, and then use readdir() to loop through the entries
     * and process them. You have to be careful not to process the
     * "." and ".." directory entries, or you'll end up spinning in
     * (infinite) loops. Also make sure you closedir() when you're done. 
     *
     * You'll also want to use chdir() to move into this new directory,
     * with a matching call to chdir() to move back out of it when you're
     * done. 
     */
}

void process_file(const char* path) { 
    /*
     * Update the number of regular files.
     */
}

void process_path(const char* path) { 
    if (is_dir(path)) {
        process_directory(path); 
    } else { 
        process_file(path); 
    } 
}

int main (int argc, char *argv[]) { 
    // Ensure an argument was provided.
    if (argc = 2) { 
        printf ("Usage: %s <path>\n", argv[0]); 
        printf ("       where <path> is the file or root of the tree you want to summarize.\n"); 
        return 1; 
    }

    num_dirs = 0; 
    num_regular = 0;

    process_path(argv[1]);

    printf("There were %d directories.\n", num_dirs); 
    printf("There were %d regular files.\n", num_regular);

    return 0; 
}

Static variables as "fields"

The static int declaration on line 9 gives us two semi-global variables that are visible to all the functions in this file, but invisible outside of this file. This gives us something sort of like fields in a class in a language like Java, except that you can't make "instances" of this file so there are never more than these two integer variables. (This means if you tried to use this approach for something like a stack, then you couldn't ever have more than one stack.)

Calling stat()

In is_dir(), you'll want to use the stat() system call (try man 2 stat) to get the "status" of the file identified by path. The signature for stat() is

int stat(const char *path, struct stat *buf);

This is typical of many library functions where the "return value" is actually being written into a pointer argument (buf in this case), and what's returned is an error code. If the error code is 0, then stat worked fine, and its results are stored in buf; if the error code is non-zero then there was a problem (e.g., the file didn't actually exist) and you can't count on buf containing any meaningful information. What you get in buf is a whole bunch of information including the (inode)[https://en.wikipedia.org/wiki/Inode] number, access and change times, etc. (see the man page for more). What we care about is the st_mode field; to access that field you need to dereference the pointer (i.e., *buf) and then use the dot notation to access the field: (*buf).st_mode. This syntax is sufficiently awkward (the parens are necessary because dot binds more tightly than star), that the designers of C provided an alternative syntax for this common case: buf->st_mode.

This st_mode field contains all the file permission information, which includes whether it's a directory or not. We could try to extract that information from st_mode directly, but they've given us a S_ISDIR() macro that does that work for us. Then the key expression is something like

S_ISDIR(buf->st_mode)

An important point about stat() is that the function doesn't allocate space for buf; you're supposed to have done that before you call stat(). You can do this with malloc(), or you can actually declare a struct stat locally (struct stat buf), and pass it's address to stat() with &buf. If you do that, buf isn't a pointer, so you don't need the arrow notation above and can just use

S_ISDIR(buf.st_mode)

Reading directories

In process_directory you'll need to have a loop that reads all the entries in the directory named by the given path, making recursive calls to process those sub-paths. The basic approach is to use opendir() to open the directory, repeatedly call readdir() to read the next entry from the directory, and then call closedir() at the end. There are a few bits you need to be careful of:

• You need use chdir() at the start of process_directory() to actually move into the directory you're processing. You'll then to use chdir("..") to move back up to the parent directory at the end of process_directory().
• You need to check whether readdir() gave you either "." or ".." as the d_name. It will eventually do that since every directory contains both those entires. You don't want to make recursive calls on those, because you'll end up in an infinite loop.

Checking for errors

Since C tends to just crash horribly when something goes wrong, you want to get in the habit of checking for errors so you can try to give your user some useful feedback. I've provided an example in main() where I check that the program is called with the right number of command line arguments. You also want to check the result code returned by stat() in is_dir(). You should also probably check for errors from things like opendir(), readdir(), closedir(), and chdir(), although errors there are less likely.

C using ftw()

Having gotten the version with stat() to work, we're now going to do this again, using a nice library tool called ftw() (for "file tree walk"). Here you just need to call ftw() (which you can do straight from main() after checking the command line arguments), and it does all the recursive traversal of the file system for you. What you need to do is define a function

static int callback(const char *fpath, const struct stat *sb, int typeflag)

and pass it in as the second argument of ftw(), something like this:

static int callback(const char *fpath, const struct stat *sb, int typeflag) { 
    // Define stuff here 
}

#define MAX_FTW_DEPTH 16

int main(int argc, char** argv) { 
    // Check arguments and set things up

    ftw(argv[1], callback, MAX_FTW_DEPTH);

    // Print out the results 
}

ftw() will call your callback() function once for every file it finds, giving you the opportunity to do whatever you wish with that file. In our case we just determine whether it's a directory or not (the typeflag field is very useful here) and update the appropriate counter. In more general applications, however, you could check for file types (image files, for example), copy things, compute their sizes, or whatever.

The shell using find

An alternative to writing this in C is to use shell commands. Here we'd recommend using find to do the traversal for you (its -type flag is probably useful), and let wc do the counting. If you find that wc gives you white space you don't want, you can use xargs to strip that off.

To Do

The canvas rubric provides detailed information on how you will be graded. The main topics revolve around

• Create the four executable files:
  • dismvowel
  • summarize_tree
  • summarize_tree_ftw
  • summarize_tree.sh
• Ensure that the programs pass their tests
• Ensure that the C programs pass valgrind tests
• Code and commits should be understandable and useful