vcon (short for "VM Control") is a CLI tool to help manage VMs in a vSphere environment
vcon is designed to help users write scripts which perform actions against a vSphere system, so that they may clone, power-cycle, and destroy VMs in an automated fashion.
vcon is designed with the following tasks in mind.
The test command will attempt to make a connection to vSphere without performing any actions. This can help validate your credentials.
Using the clone command, vcon can duplicate a template or VM, ensure that it is in a running state, and provide information to find and access the new VM. The user must specify the destination folder using the --destination flag. The user may optionally specify a name using the --name flag, but a name will be generated if none was provided. The name may be a Go template string; see Templates.
The --configuration flag can be provided to reconfigure the VM after it's been cloned and before it is started. The value is a JSON-formatted string; see Configuration for details. Unlike the configure command, the string will not be read from STDIN when closing.
The --on flag can be set to false to prevent the VM from starting automatically.
The info command gets information about an existing VM, in JSON form. The command indicates:
- The machine's configuration: number of CPUs, memory size (in MB), and network name
- The IPv4 address or addresses
- Whether the VM is currently running
- The path to the VM in it's data center
- The Managed Object Reference in vSphere
An example result:
{
"configuration": {
"cpus": 2,
"memory": 12288,
"network": "VLAN3028"
},
"ips": [],
"isRunning": false,
"path": "/Engineering/TeamSharks/temporary VMs/bob - 2018-05-09 14:47:59",
"ref": "vm-139"
}The configure command allows the user to change certain virtual hardware allocations. In particular, the CPU, memory, and network adapter may be changed. The VM must be powered off when making changes.
The configuration is provided as a JSON object:
{
"cpus": number,
"memory": number,
"network": string
}Only VM specifications that are in the provided JSON will be altered. For example, to change the number of CPUs, but leave the memory and network unchanged, only include the cpus property.
When changing the network, it is assumed that all network devices will change to the requested network.
The JSON may be provided as an argument to the command, after the target VM, or read in from STDIN. If the JSON is not read from stdid, then the argument may either be the literal JSON, or a path to a file containing the JSON:
echo '{ "cpus": 2 }' | vcon configure $TARGET
vcon configure $TARGET "{ \"memory\": 2048 }"
vcon configure $TARGET /tmp/machine.jsonUsing the note command, vcon can append a new piece of text to a VM in vSphere. The --overwrite flag can be used to replace any existing notes.
Using the relocate command, vcon can rename a VM and/or move it into a different folder. The target location must still be in the same data store and data center. Like the clone command, the name and destination are derived from --name and --destination (or -n and -d) options. Unlike the clone command, there is no default for the name option, and for the destination, any value in a configuration file is ignored.
Using the power command, vcon can turn on, turn off, or suspend a VM. The power command uses an additional argument, on, off, or suspend, to indicate the desired state.
The snapshot command will manage snapshots. There are several subcommands: create, list, remove, and revert. This functionality is not completely tested, and may change.
Using the destroy command, vcon can remove a VM from vSphere. This will fail if the VM is currently running, but the command can stop the VM first by using the --force flag.
The version command returns the version of the binary.
vcon needs several parameters in order for it to connect to, and work with, vSphere. These parameters vary by command, but at the very least include user name, password, vSphere address, data center name, and data store name. Parameters can be provided through a number of different mechanisms, including the command line, environment variables, and a config file.
Command line options are specified with a long name (i.e., --username), and when possible, a short name (i.e., -u).
All environment variables are upper-cased versions of the command line option, and prefixed are with VCON_. For example, the environment variable for username is VCON_USERNAME. Most command line options may be specified by an environment variable.
A configuration file, named .vcon.[json|yaml], may be used to keep configuration. By default, this file would be found in the current user's home directory, and the location may be specified using the config command line option.
The vcon CLI uses Cobra and Viper to manage configuration, so as per the precedence rules, the highest precedence is given to command line options, then environment variables, then configuration file settings, and finally default values.
| Option | Short name | Command | Env | Config file | Required | Default |
|---|---|---|---|---|---|---|
| username | u | (all) | Y | Y | Y | |
| password | p | (all) | Y | Y | Y | |
| prompt-for-password | (all) | Y | true |
|||
| vsphere | v | (all) | Y | Y | Y | |
| datacenter | (all) | Y | Y | Y | ||
| datastore | (all) | Y | Y | Y | ||
| timeout | t | (all) | Y | Y | 30 |
|
| verbose | v | (all) | Y | false |
||
| config | (all) | ~/.vcon.[json|yaml] |
||||
| configuration | c | clone | ||||
| destination | d | clone, relocate | Y (*) | |||
| name | n | clone, relocate, snapsnot-create | (generated) (**) | |||
| on | clone | true |
||||
| resourcepool | clone | Y | Y | Y | ||
| force | f | destroy | false |
|||
| overwrite | note | false |
||||
| snapshotIsRef | snapshot-remove, snapshot-revert | false |
||||
| targetIsRef | configure, destroy, info, note, power, snapshot-* | false |
* The destination parameter for the relocate command is not taken from the config file
** The name parameter is for the relocate command is not generated
The name parameter for the clone and snapshot create can accept a Go template string. The default template fills in the vSphere user's name and a local datetime stamp. For example, the VM name template defaults to {{ username }} - {{ now }}.
On top of Go's built-in template functions, vcon comes with some extra functionality added.
Env takes one argument and returns the value of an environment variable whose name is a case-sensitive match for the arguement.
Now returns the local time. Now also accepts an optional argument, which can describe the time format using the Joda time format.
Username returns the logged-in user's name, as per the User object. If this is in an email format, only the name section is returned (i.e., foo in [email protected]).
UtcNow returns the UTC time. UtcNow also accepts an optional argument, which can describe the time format using the Joda time format.
VsUsername returns the name of the user which is used to communicate with vSphere. If this is in an email format, only the name section is returned (i.e., foo in [email protected]).
vcon clone "/Engineering/templates/Deployment Template" --on=false --name='TEST {{ Username }} {{ Now `YYYY` }} {{ UtcNow }}'
# {
# "configuration": {
# "cpus": 2,
# "memory": 4096,
# "network": "VLAN3000"
# },
# "ips": [],
# "isRunning": false,
# "path": "/Engineering/TeamSharks/temporary VMs/TEST Brousseau 2018 2018-08-13 04:54:22",
# "ref": "vm-139"
# }vcon is designed to strictly operate within a single data center and data store. If your requirements involve cloning virtual machines from one data store or data center to another, vcon is insufficient.
vcon cannot create new VMs; it can only clone existing VMs and templates.
vcon is not designed for extensive VM alterations. The CPU and memory can be changed, and the attached network may be changed. If there are multiple network adapters, it is assumed that all network adapters will be changed to the same network. Other VM features such as sound device, optical drive, and disk configuration cannot be changed with this tool.
vcon has been developed against an ESXi 6.5 system & API. No testing has been done older versions or other VMware products. Finally, vcon is not associated with VMware aside from the usage of the govmomi library.
This example uses the jq library for JSON parsing. This example is meant to demonstrate how a user may script the cloning, reconfiguration, and powering of a VM before executing a test. After the test, the VM is either torn down, or moved into a separate folder for post-test examination.
#!/bin/bash
set -euo pipefail
# Testing the connection
vcon test
# Clone a template; don't spin up yet
RESULTS=$(vcon clone "/Engineering/templates/Deployment Template" --destination "/Engineering/TeamSharks/temporary VMs" --on=false)
# RESULTS is a JSON block, shaped like...
# {
# "configuration": {
# "cpus": 2,
# "memory": 4096,
# "network": "VLAN3000"
# },
# "ips": [],
# "isRunning": false,
# "path": "/Engineering/TeamSharks/temporary VMs/MyName - 2018/04/29 20:44:22"
# "ref": "vm-139
# }
# Pull the id out of the result JSON
TARGET=$(echo $RESULTS | jq -r ".ref")
# Append some notes
vcon note $TARGET "VM generated for Team Shark acceptance test, feature F1234" --targetIsRef
# Change the VM's hardware configuration using HEREDOC
vcon configure $TARGET --targetIsRef << EOF
{
"cpus": 6,
"memory": 4096
}
EOF
# Power up VM
vcon power on $TARGET --targetIsRef
# Get the IP address
IP=$(vcon info $TARGET --targetIsRef | jq -r ".ips | .[0]")
# Execute some automated tests
REMOTE_IP=$IP testcafe ...
SUCCESS=$?
if [[ $SUCCESS == 0 ]];
# Destroy the VM; the force option will power it down first.
vcon destroy $TARGET --targetIsRef --force
else
vcon relocate $TARGET --targetIsRef --destination "/Engineering/TeamSharks/Failed tests"
vcon note $TARGET "Test failed" --targetIsRef
vcon power off $TARGET --targetIsRef
fi