Fix markdown

docs/guides/Security Groups.md

@@ -3,7 +3,7 @@
 This guide provides a step by step walkthrough of how to get started utilizing security groups in OpenStacks
 
 
-# What are Security Groups
+# What are Security Groups?
 
 Security Groups are what allows you to determine what inbound and outbound traffic is allowed into your instances (virtual machines).
 In simple terms they act like a virtual firewall that operates at the instance level, controlling access based on IP addressess, port numbers, and protocols.
@@ -13,63 +13,48 @@ In simple terms they act like a virtual firewall that operates at the instance l
 
 When creating an instance on OpenStack if you don't implement your own security group it will use its default.
 The default rules set the following standard:
-    ```
-    Inbound Traffic: Blocked by default
-    Outbound Traffic: Allowed by default
-    ```
+
+```
+Inbound Traffic: Blocked by default
+Outbound Traffic: Allowed by default
+```
 Depending on your security and accessibility needs you'll need to tailor your secuity groups accordingly.
 
 
 # Example- Allowing SSH via Security Groups
-
-## 1. Once you have logined into your openstack portal navigate to the Networks tab and click Security Groups located in the column on the left hand side of the screen
-![alt text](../img/Security-Groups/Networks-Tab.png)
 
-## 2. Click on Create Security Group
+1. Once you have logined into your openstack portal navigate to the Networks tab and click Security Groups located in the column on the left hand side of the screen ![alt text](../img/Security-Groups/Networks-Tab.png)
 
+2. Click on Create Security Group
 ![alt text](../img/Security-Groups/Create-Security-Group.png)
 
-## 3. Name your new Secuirty Group something like "Allow SSH" or something similar to make it easier to remember in the future. You can also add a description for further clarification. When you're finished naming click Create Security Group.
-
+3. Name your new Secuirty Group something like "Allow SSH" or something similar to make it easier to remember in the future. You can also add a description for further clarification. When you're finished naming click Create Security Group.
 ![alt text](../img/Security-Groups/Naming-Sec-Group.png)
 
-## 4. You'll then be taken to the rule management papge. Here you can add the specific rules you want for traffic on your instance. Here's a break down of the terms you'll see:
-
+4. You'll then be taken to the rule management papge. Here you can add the specific rules you want for traffic on your instance. Here's a break down of the terms you'll see:
 ![alt text](../img/Security-Groups/Rules-Explained.png)
-
-```
-    Egress: Outgoing network traffic from your vm
-
-    Ingress: Inbound network traffic to your vm
-
-    Ether Type: Identifies the protocal type of the payload (Typically IPv4 or IPv6)
-
-    IP Protocol: Specifies which network protocol the rule applies to (TCP, UDP, ICMP)
-
-    Port Range: Specifies which ports the rule applies to
-        Port 22: Typically used for SSH traffic
-        Port 80: Typically used for HTTP web traffic
-
-    Remote IP Prefix: Defines the source or destination IP addresses in CIDR notation
-
-    Remote Security Group: Specifies another security group as the source or destination
-
-```
-## 5. Click on Add Rule
-
+    - Egress: Outgoing network traffic from your vm
+    - Ingress: Inbound network traffic to your vm
+    - Ether Type: Identifies the protocal type of the payload (Typically IPv4 or IPv6)
+    - IP Protocol: Specifies which network protocol the rule applies to (TCP, UDP, ICMP)
+    - Port Range: Specifies which ports the rule applies to
+        - Port 22: Typically used for SSH traffic
+        - Port 80: Typically used for HTTP web traffic
+    - Remote IP Prefix: Defines the source or destination IP addresses in CIDR notation
+    - Remote Security Group: Specifies another security group as the source or destination
+
+5. Click on Add Rule
 ![alt text](../img/Security-Groups/Add-Rule.png)
 
-## 6. Update the following drop down boxes to all SSH and click add to create the new rule
-
+6. Update the following drop down boxes to all SSH and click add to create the new rule
 ![alt text](../img/Security-Groups/Modifiying-Rule.png)
 
-## 7. (Optional) If you'd like to be able to ping your instance to check if it's working for inbound ssh traffic you can add another rule to allow ICMP (Internet Control Message Protocol)
-
+7. (Optional) If you'd like to be able to ping your instance to check if it's working for inbound ssh traffic you can add another rule to allow ICMP (Internet Control Message Protocol)
 ![alt text](../img/Security-Groups/Adding-ICMP.png)
 
 
 
 # Summary
-## Now you should be all set to create and add your own Security Groups to your instances. Good luck on your Infra journey!
+Now you should be all set to create and add your own Security Groups to your instances. Good luck on your Infra journey!
 
 [//]: # (![alt text](../img/Security-Groups/Hack.png#center))