A zsh plugin that automatically loads completions added dynamically to FPATH or XDG_DATA_DIRS
Anytime after the start of your shell if new entries have been added to your FPATH, this plugin will reload your completion system to make the new completions functions immediately available. It also loads extra paths from $XDG_DATA_DIRS to comply with the XDG spec.
This plugin is especially useful/important for users of dynamic development shells via tools like direnv, nix-direnv, nix develop, which dynamically put specific versions of executables on the front of $PATH and typically surface matching completion scripts via $XDG_DATA_DIRS
Normally zsh only builds the pairing of executable name and completion functions once at shell startup, when compinit is called, typically while sourcing ~/.zshrc. For this, only directories on $FPATH are considered. Any additions to $FPATH after this point, will make the functions themselves available for autoloading, but the completion system will not consider them anymore. This means that any tools that are installed non-permanently, will never have their completions picked up, since they will generally not be on the startup $FPATH (or $PATH for that matter).
Users of nix and direnv are hit especially hard by this, since they rely on non-permanent changes to the running shell or shells with dynamically generated $PATH. This plugin bridges that still unresolved need for zsh users. (Note, for fish users, there is a similar plugin here)
When sourced, this plugin only defines functions and registers hooks. The hooks are only executed the first time the prompt is rendered. Therefore it is not very sensitive to load order, however it should be loaded late to ensure that it only runs after all other hooks that could affect the relevant env vars have run.
Should work out of the box.
Most packages have shell completion scripts for bash,zsh, and fish available in their share directory. mkShell automatically adds their share directories to $XDG_DATA_DIRS, so if they ship a zsh/site-functions dir in them (i.e. they used installShellCompletion --zsh, which is most), this plugin will add them to the $FPATH and make the functions available for completion.
Currently, nix-shell does not currently set nativeBuildInputs (NixOS/nix#4254) and therefore does not set/expand $XDG_DATA_DIR.
This plugin offers a slightly hacky workaround which tries to discover fpaths from entries on $PATH.
You can enable it by setting zstyle ':completion-sync:path' enabled true. Since this behaviour does not conform to the meaning of the $PATH variable (as opposed to $FPATH and $XDG_DATA_DIR) it is not enabled by default. Putting relevant packages into nativeBuildInputs (once supported) is the preferred way.
Ensure that .envrc exports an extended $XDG_DATA_DIRS. each path should contain a folder zsh/site-functions or zsh/$ZSH_VERSION/functions, (often this path also contains completion scripts for other shells and is therefore shell agnostic and preferrable over setting fpath directly). Alternatively, expand $FPATH with the folders containing the completion scripts (Remember that direnv uses a bash subshell, so you need to use the scalar $FPATH and not the array $fpath)
This plugin registers a hook for both precmd (run each time before the prompt is displayed) and chpwd (run when changing directories). It registers itself at the end of the hook chain when it is loaded, in the hope of going last after all hooks that might change the env vars (especially after the dir env hook).
The first time this feature loads, it will enumerate all subpaths of XDG_DATA_DIRS that contain zsh functions ($dir/zsh/site-functions, $dir/zsh/$ZSH_VERSION/functions, or $dir/zsh/vendor-completions which is a non-standard path used by debian packages) and then prepend all of these paths that are not on the FPATH yet to the FPATH. This avoids overriding custom overrides for internal functions again by putting the zsh install directory on the front of the path, because it is also reachable via $XDG_DATA_DIRS.
Then everytime $XDG_DATA_DIRS changes, the plugin then enumerates the zsh function subpaths again and then diffs that against the last state of the function dirs. It then adds/removes these from fpaths as indicated by the diff. Note, that unlike in the initialization, this will always prepend or remove the first occurence of a path from the fpath. If a directory is dynamically added during runtime, we assume that the user wants it to take priority.
The PATH sync feature is a workaround for nix-shell -p, which puts the bin/ folder of nix a set of nix derivations on the PATH, but doesn't export their share/ directory on $XDG_DATA_DIRS. (This is in tune with how nix works, since only nativeBuildInputs and not packages are meant to export their data dirs). In nix, these share/ dirs are siblings to the bin/ path on $PATH and if they have a corresponding zsh completions, those are installed in share/zsh/site-functions. So, to discover these fpaths, the plugin tests for the existence of a directory at $p/$relPath for every $p from $PATH and $rp from the configured array of relative paths. The default works for discovering any zsh FPATHs in nix derivations on $PATH. The resultant array of paths is then added to the front of $FPATH (preserving priority order from $PATH) if the relevant path if not on $FPATH yet. When there is a change in $PATH, the plugin builds the array from the current $PATH again and diffs it against the last state, adding or/removing to/from the front of $FPATH as needed.
Since zsh-autocomplete includes very heavy customization of the zsh compsys, we cannot simply use the existing mechanism of calling compinit again. Instead we need to source (i.e. initialize) all of zsh-autocomplete again. To accomplish this, the plugin tries to detect if functions defined by ZAC are currently loaded. (ZAC functions seem uniquely prefixed by '.autocomplete:'). We then take the first function with this prefix, query what path it was loaded from and then walk the file tree upwards until we detect a file named zsh-autocomplete.plugin.zsh. If such a file is found before trying to check /.., we remember it's path and subsequently replace our calls to compinit with source <path to zsh.plugin.zsh>. This detection is not perfect, but robust enough for almost all normal usecases. For a more correct and faster solution see The Correct Way
In the future we hope that the integration can be made more lightweight with specific functions to just reload the matching of commands and completion functions, or even allow for adding/removing specific completion entries.
You can use zstyle to control the behaviour of the plugin. This includes enabling/disabling certain feature-sets and fine-grained control over debug logging.
To turn the XDG_DATA_DIRS feature on or off, set zstyle 'completion-sync:xdg' enabled (default enabled).
Note that disabling this feature during runtime will not remove the dirs added to the fpath at startup, it will only pause the syncing. To avoid adding paths from $XDG_DATA_DIRS to $FPATH, set the zstyle in .zshrc (i.e. before the first prompt is rendered)
To enable detecting zsh function paths from the binary search path, set zstyle :completion-sync:path enabled true (default false).
The plugin searches the relative paths indicated in the array set in zstyle :completion-sync:path rel_dirs (default: ("../share/zsh/$ZSH_VERSION/functions" '../share/zsh/site-functions')). The default is setup based on the typical nix derivation structure, which has its share//XDG_DATA_DIR as a sibling to the bin/ directory on the path.
Note that if you want nix-shell to put you into zsh by default and only need support for nix-shell compatibility, you should install this plugin for compatibility which does put nix fpaths onto path already and does not require this plugin's workaround.
The following options all control how the zsh compsys is reloaded when a change in fpath is detected. These options take priority in the following order
- Custom (default: disabled)
- zsh-autocomplete (if enabled and zsh-autocomplete found, default: enabled)
- Builtin compinit (default: disabled)
compinit -D(using the loaded compinit)
If the existing options are not sufficient or you want to fine tune how compsys is reloaded, you can set a custom command
zstyle ':completion-sync:compinit:custom' enabled true
zstyle ':completion-sync:compinit:custom' command 'this string will be eval'ed'The plugin zsh-autocomplete (ZAC) customizes the behaviour of zsh's compsys to an extreme degree. it does this so much, that any calls to the builtin compinit will break the plugin in subtle to overt ways. As a protection, the plugin disables compinit completely after it has loaded (see Builtin Compinit for details). This leaves us without a good option on how to reload our completions system. While forcing use of the builtin compinit function allows reloading, this will lead to aforementioned breakage. Instead, we can make use of the fact, that zsh-autocomplete initialization is idempotent and source the complete plugin again to ensure that zsh-autocomplete re-initializes on the current FPATH
In order to re-initialize ZAC , this plugin needs to know where ZAC is installed
zstyle ':completion-sync:compinit:custom' enabled true
zstyle ':completion-sync:compinit:custom' command 'source <path to zsh-autocomplete.plugin.zsh>'This plugin can also try to detect the installation path of zsh-autocomplete for you.
zstyle ':completion-sync:compinit:compat:zsh-autocomplete' enabled true # default: trueNote that will slow down your shell startup a little, since we first need to find a function belonging to the plugin, find out where it was loaded from and then walk the filesystem upwards to find the folder that zsh-autocomplete-plugin.zsh is in. Once the plugin finds the correct path once, it can advise you how to speed up your shell start by setting
zstyle ':completion-sync:compinit:compat:zsh-autocomplete' optimize true # default: trueThen just follow the instructions output at shell start.
Caution: This is hacky and will probably break something.
zstyle ':completion-sync:compinit:builtin-compinit' enabled true #default: falseSome plugins patch or otherwise modify the compinit function. this can leave us unable to access the functionality necessary for reloading the completion system. As a workaround, this option, if enabled will first copy the existing compinit function out of the way and autoload compinit from the fpath again. The result of this is almost always the builtin compinit or a function meant to act as a drop-in replacement and therefore safe to call.
Note that while this will bruteforce re-enable the ability to reload completions, there is often a very good reason why plugins patch compinit. Sometimes, it is only the goal of improving performance ensuring that multiple calls to compinit in .zshrc via different plugins do not slow down shell start. In this case, where compinit was no-op'ed for performance, it is safe to enable this option.
On the other hand, plugins like zsh-autocomplete (which made me originally write this workaround) no-op the function, because it's default behaviour will break zsh-autocomplete in subtle ways. Using builtin-compinit with it gets completions for new commands, but at degraded autocomplete functionality across the board.
Examples:
# Enable debug logging by default
zstyle ':completion-sync:*' debug true
# Turn off the very verbose line diffs
zstyle ':completion-sync:*:diff' debug false
# Turn off debug logging about candidate paths
zstyle ':completion-sync:**:candidate' debug false
zstyle ':completion-sync:**:candidate:*' debug falseYou can control the debug logging very precisely if you need to, but for most use cases the options above are sufficient. If you need more precision, search for :completion-sync: in the source.