-
Some tuya devices like the TS004X family devices is very Zigbee but need little patching for working OK in ZHA like disabling the time cluster for not turning itself off in 2 minutes and its working great the all devices is behaving the same and using Then its tuya devices it very likely coming "custom versions" that is little different and needs being selected with Is it possible in the quirk first adding devices with I dont knowing how the selection mechanism is working but if its possible doing like in my example its wold being great for some devices quirks. Mvh MW |
Beta Was this translation helpful? Give feedback.
Replies: 3 comments 1 reply
-
Also if its possible i think its one policy question how to implanting quirks so its being good done and not 15 different ways doing the same thing. I think all tuya ts0601 deices shall being moved to one folder for not being mixes with "normal" Zigbee device that not needing all DP things in the init that is in the tuya main folder. |
Beta Was this translation helpful? Give feedback.
-
Have starting adding functions i tuya INI with TuyaZB in front of the function in the INI for making then easier to see that is zigbee devices and not DP device function like: 2 unknown tuya cluster 0xE000 and 0xE001 that is out of range ((0xFC00, 0xFFFF) is the range for manufacture cluster) and need being defined for not getting problems then making quirks. |
Beta Was this translation helpful? Give feedback.
-
We have testing with TS004F and if first adding |
Beta Was this translation helpful? Give feedback.
We have testing with TS004F and if first adding
MODELS_INFO
for "special devices" and the last class isMODEL:
the model info is first cached and loaded and not the model and if the device is not having one matching model info its using the model if the EP / cluster config is OK.Tested with the classical 4 button dimmer switch and the new knob and both is triggering there class and if changing the model id its using the model = OK.