Candidate update to TS0041 to support _TYZB02_keyjqthh

[MrEcosse]

Have updated the TS0041 quirk to support the above variant which has AG Security on the circuit board. Button presses work but cannot seem to get a battery reading.

Have a similar update for the 3 button version _TYZB02_key8kk7r

`
"""Tuya 1 Button Remote."""

from zigpy.profiles import zha
from zigpy.quirks import CustomDevice
from zigpy.zcl.clusters.general import Basic, OnOff, Ota, PowerConfiguration, Time

from zhaquirks.const import (
BUTTON_1,
COMMAND,
DEVICE_TYPE,
DOUBLE_PRESS,
ENDPOINT_ID,
ENDPOINTS,
INPUT_CLUSTERS,
LONG_PRESS,
MODEL,
OUTPUT_CLUSTERS,
PROFILE_ID,
SHORT_PRESS,
)
from zhaquirks.tuya import TuyaSmartRemoteOnOffCluster

class TuyaSmartRemote0041TO(CustomDevice):
"""Tuya 1-button remote device with time on out."""

signature = {
    # SizePrefixedSimpleDescriptor(endpoint=1, profile=260, device_type=0, device_version=1, input_clusters=[0, 1, 6], output_clusters=[25, 10])
    MODEL: "TS0041",
    ENDPOINTS: {
        1: {
            PROFILE_ID: zha.PROFILE_ID,
            DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
            INPUT_CLUSTERS: [
                Basic.cluster_id,
                PowerConfiguration.cluster_id,
                OnOff.cluster_id,
            ],
            OUTPUT_CLUSTERS: [Ota.cluster_id, Time.cluster_id],
        },
    },
}
replacement = {
    ENDPOINTS: {
        1: {
            PROFILE_ID: zha.PROFILE_ID,
            DEVICE_TYPE: zha.DeviceType.REMOTE_CONTROL,
            INPUT_CLUSTERS: [
                Basic.cluster_id,
                PowerConfiguration.cluster_id,
                TuyaSmartRemoteOnOffCluster,
            ],
            OUTPUT_CLUSTERS: [Ota.cluster_id, Time.cluster_id],
        },
    },
}

device_automation_triggers = {
    (SHORT_PRESS, BUTTON_1): {ENDPOINT_ID: 1, COMMAND: SHORT_PRESS},
    (LONG_PRESS, BUTTON_1): {ENDPOINT_ID: 1, COMMAND: LONG_PRESS},
    (DOUBLE_PRESS, BUTTON_1): {ENDPOINT_ID: 1, COMMAND: DOUBLE_PRESS},
}

class TuyaSmartRemote0041TI(CustomDevice):
"""Tuya 1-button remote device with time on in."""

signature = {
    # SizePrefixedSimpleDescriptor(endpoint=1, profile=260, device_type=0, device_version=1, input_clusters=[0, 10, 1, 6], output_clusters=[25]))
    MODEL: "TS0041",
    ENDPOINTS: {
        1: {
            PROFILE_ID: zha.PROFILE_ID,
            DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
            INPUT_CLUSTERS: [
                Basic.cluster_id,
                PowerConfiguration.cluster_id,
                OnOff.cluster_id,
                Time.cluster_id,
            ],
            OUTPUT_CLUSTERS: [Ota.cluster_id],
        },
    },
}
replacement = {
    ENDPOINTS: {
        1: {
            PROFILE_ID: zha.PROFILE_ID,
            DEVICE_TYPE: zha.DeviceType.REMOTE_CONTROL,
            INPUT_CLUSTERS: [
                Basic.cluster_id,
                PowerConfiguration.cluster_id,
                TuyaSmartRemoteOnOffCluster,
                Time.cluster_id,
            ],
            OUTPUT_CLUSTERS: [Ota.cluster_id],
        },
    },
}

device_automation_triggers = {
    (SHORT_PRESS, BUTTON_1): {ENDPOINT_ID: 1, COMMAND: SHORT_PRESS},
    (LONG_PRESS, BUTTON_1): {ENDPOINT_ID: 1, COMMAND: LONG_PRESS},
    (DOUBLE_PRESS, BUTTON_1): {ENDPOINT_ID: 1, COMMAND: DOUBLE_PRESS},
}

class TuyaSmartRemote0041NT(CustomDevice):
"""AG Security/Tuya 1-button remote device with no time on."""

signature = {
    # SizePrefixedSimpleDescriptor(endpoint=1, profile=260, device_type=0, device_version=1, input_clusters=[0, 1, 6], output_clusters=[25]))
    MODEL: "TS0041",
    ENDPOINTS: {
        1: {
            PROFILE_ID: zha.PROFILE_ID,
            DEVICE_TYPE: zha.DeviceType.ON_OFF_SWITCH,
            INPUT_CLUSTERS: [
                Basic.cluster_id,
                PowerConfiguration.cluster_id,
                OnOff.cluster_id,
            ],
            OUTPUT_CLUSTERS: [Ota.cluster_id],
        },
    },
}
replacement = {
    ENDPOINTS: {
        1: {
            PROFILE_ID: zha.PROFILE_ID,
            DEVICE_TYPE: zha.DeviceType.REMOTE_CONTROL,
            INPUT_CLUSTERS: [
                Basic.cluster_id,
                PowerConfiguration.cluster_id,
                TuyaSmartRemoteOnOffCluster,
            ],
            OUTPUT_CLUSTERS: [Ota.cluster_id],
        },
    },
}

device_automation_triggers = {
    (SHORT_PRESS, BUTTON_1): {ENDPOINT_ID: 1, COMMAND: SHORT_PRESS},
    (LONG_PRESS, BUTTON_1): {ENDPOINT_ID: 1, COMMAND: LONG_PRESS},
    (DOUBLE_PRESS, BUTTON_1): {ENDPOINT_ID: 1, COMMAND: DOUBLE_PRESS},
}

`