Skip to content

Latest commit

 

History

History
404 lines (286 loc) · 10.5 KB

README.md

File metadata and controls

404 lines (286 loc) · 10.5 KB

nats_msg

nats_msg is a pure Erlang NATS message encoder/decoder library for NATS high performance messaging platform. For details about NATS protocol, see: NATS Protocol. It doesn't have any dependency other than Erlang/OTP (16+ should be OK) and optionally rebar3.

News

  • Version 0.4.1 (2016-03-23):
    • This version is incompatible with previous versions of the library.
    • Decoding is lazy, in the sense that, only a single message is decoded whenever the decode is called. You can use nats_msg:decode_all/1 to simulate the old behaviour.
    • HUGE performance improvements (2x - 100x).
    • The parser is much more stricter now.
    • Encoding functions return iodata instead of binary.
    • You can use iodata anywhere a binary is expected.

Install

nats_msg uses rebar3 to build and tests and it is available on hex.pm. Just include the following in your rebar.config:

{deps, [nats_msg]}.

Tests

Run the tests using:

$ rebar3 eunit

Build

$ rebar3 compile

Usage

IMPORTANT!

Before running any decoding functions, nats_msg:init/0 must be called once.

Binaries and iodata are used exclusively throughout the library.

Currently, no error handling is performed during encoding/decoding. You can protect against crashes by wrapping library functions between try...catch.

INFO and CONNECT messages have a JSON object as their parameter; but in order to not introduce a dependency, nats_msg does not encode/decode JSON objects. These parameters are kept or returned as binaries. You can use jsx or jiffy to deal with JSON. See the INFO and CONNECT sections in this document for examples.

Encoding

Encoding a message produces an IO list. nats_msg:encode/1 takes an atom as the name of the message or a tuple which contains the name, parameters and payload of the message.

The general form of nats_msg:encode/1 parameters is:

  • Name :: atom(): For messages taking no parameters,
  • {Name :: atom(), Parameters :: {iodata() | int(), ...}} for messages taking parameters but not a payload,
  • {Name :: atom(), Parameters :: {iodata() | int(), ...}, Payload :: iodata()} for messages taking parameters and a payload.

Messages of the same type always have the same structure, even if some of the values are undefined. Some examples:

  • nats_msg:encode(ping) produces a PING message,
  • nats_msg:encode({sub, {<<"INBOX">>, undefined, <<"2">>}} produces a SUB message with subject <<"INBOX">> and SID <<"2">>. This particular message has no queue group, so that field is set to undefined.
  • nats_msg:encode({pub, {<<"FOO">>, undefined, 11}, <<"Hello NATS!">>} produces a PUB message with subject <<"FOO">> and payload <<"Hello NATS!">> of size 11 and no reply to subject.

The library has convenience functions for all messages, like nats_msg:ping/0, which are discussed later in this document.

Decoding

Decoding a binary/iodata produces a {Message, RemainingBinary} tuple. Message is either [] if the data is not sufficient to decode the message, or the a term for the message, and RemainingBinary is the part of the input which wasn't decoded and returned. The latter is very useful when dealing with streams, where the input is chunked and appending chunks is required to be able to decode messages. In those situations, just prepend RemainingBinary to the next binary chunk before attempting to decode it.

The Message be used as an input to nats_msg:encode, like:

SomeBinary = ...
{Msg, Remaining} = nats_msg:decode(SomeBinary),
ReEncodedBinary = nats_msg:encode(Msg),
% ReEncodedBinary = SomeBinary

INFO Message

NATS Spec

Encode

ServerInfo = #{<<"auth_required">> => true, <<"server_id">> => <<"0001-SERVER">>},
BinaryInfo = jsx:encode(ServerInfo),
BinaryMsg = nats_msg:info(BinaryInfo).

Decode

Chunk = <<"INFO {\"auth_required\":true,\"server_id\":\"0001-SERVER\"}\r\n">>,
{Msg, _} = nats_msg:decode(Chunk),
{info, BinaryInfo} = Msg,
ServerInfo = jsx:decode(BinaryInfo, [return_maps]).

CONNECT Message

NATS Spec

Encode

ConnectInfo = #{<<"auth_required">> => true, <<"server_id">> => <<"0001-SERVER">>},
BinaryInfo = jsx:encode(ServerInfo),
BinaryMsg = nats_msg:connect(BinaryInfo).

Decode

Chunk = <<"CONNECT {\"verbose\":true,\"name\":\"the_client\"}\r\n">>,
{Msg, _} = nats_msg:decode(Chunk),
{connect, BinaryInfo} = Msg,
ClientInfo = jsx:decode(BinaryInfo, [return_maps]).

PUB Message

NATS Spec

Encode

Notify subscribers of a subject:

BinaryMsg = nats_msg:pub(<<"NOTIFY.INBOX">>).

Send some data (payload) to subscribers, providing a reply subject:

BinaryMsg = nats_msg:pub(<<"FOOBAR">>, <<"REPRAP">>, <<"Hello, World!">>).

Send some data (payload) to subscribers (without a reply subject):

BinaryMsg = nats_msg:pub(<<"FOOBAR">>, undefined, <<"Hello, World!">>).

Decode

Publish notification:

Chunk = <<"PUB NOTIFY 0\r\n\r\n">>,
{Msg, _} = nats_msg:decode(Chunk),
{pub, {Subject, ReplyTo, Payload}} = Msg,
% Subject = <<"NOTIFY">>,
% ReplyTo = undefined,
% Payload = <<>>.

Publish message with subject, replier and payload:

Chunk = <<"PUB FRONT.DOOR INBOX.22 11\r\nKnock Knock\r\n">>,
{Msg, _} = nats_msg:decode(Chunk),
{pub, {Subject, ReplyTo, Payload}} = Msg,
% Subject = <<"FRONT.DOOR">>,
% ReplyTo = <<"INBOX.22">>,
% Payload = <<"Knock Knock">>.

SUB Message

NATS Spec

Encode

Subscribe message with subject and SID:

BinaryMsg = nats_msg:sub(<<"FOO">>, <<"1">>).

Subscribe message with subject, group queue and SID:

BinaryMsg = nats_msg:sub(<<"BAR">>, <<"G1">>, <<"44">>)

Decode

Chunk = <<"SUB FOO 1\r\n">>,
{Msg, _} = nats_msg:decode(Chunk),
{sub, {Subject, GroupQueue, Sid}} = Msg,
% Subject = <<"FOO">>,
% GroupQueue = undefined,
% Sid = <<"1">>.

UNSUB Message

NATS Spec

Encode

Unsubscribe message with SID:

BinaryMsg = nats_msg:unsub(<<"1">>).

Unsubscribe message with SID and max messages:

BinaryMsg = nats_msg:unsub(<<"1">>, 10).

Decode

Chunk = <<"UNSUB 1 10\r\n">>,
{Msg, _} = nats_msg:decode(Chunk),
{unsub, {Sid, MaxMessages}} = Msg,
% Sid = <<"1">>,
% MaxMessages = 10

MSG Message

NATS Spec

Encode

Message with subject and SID:

BinaryMsg = nats_msg:msg(<<"FOO">>, <<"5">>).

Message with subject, sid, reply to subject and payload:

BinaryMsg = nats_msg:msg(<<"FOO">>, <<"5">>, <<"INBOX">>, <<"Hello!">>).

Message with subject, sid and payload:

BinaryMsg = nats_msg:msg(<<"FOO">>, <<"5">>, undefined, <<"Hello!">>).

Decode

Message with subject, sid and payload:

Chunk = <<"MSG FOO.BAR 9 13\r\nHello, World!\r\n">>,
{Msg, _} = nats_msg:decode(Chunk),
{msg, {Subject, Sid, ReplyTo, Payload}} = Msg,
% Subject = <<"FOO.BAR">>,
% Sid = <<"9">>,
% ReplyTo = undefined,
% Payload = <<"Hello, World!">>.

PING Message

NATS Spec

Encode

BinaryMsg = nats_msg:ping().

Decode

{Msg, _} = nats_msg:decode(<<"PING\r\n">>),
% Msg = ping

PONG Message

NATS Spec

Encode

BinaryMsg = nats_msg:pong().

Decode

{Msg, _} = nats_msg:decode(<<"PONG\r\n">>),
% Msg = pong

+OK Message

NATS Spec

Encode

BinaryMsg = nats_msg:ok().

Decode

{Msg, _} = nats_msg:decode(<<"+OK\r\n">>),
% Msg = ok

-ERR Message

NATS Spec

The spec defines a predefined set of error messages, so nats_msg encodes/decodes these to/from atoms as:

  • 'Unknown Protocol Operation' => unknown_operation
  • 'Authorization Violation' => auth_violation
  • 'Authorization Timeout' => auth_timeout
  • 'Parser Error' => parser_error
  • 'Stale Connection' => stale_connection
  • 'Slow Consumer' => slow_consumer
  • 'Maximum Payload Exceeded' => max_payload
  • 'Invalid Subject' => invalid_subject
  • Other errors are converted to unknown_error during decoding and kept as is during encoding.

Encode

BinaryMsg = nats_msg:err(auth_violation).

Decode

Chunk = <<"-ERR 'Authorization Timeout'\r\n">>,
{Msg, _} = nats_msg:decode(Chunk),
{ok, Error} = Msg,
% Error = auth_timeout

License

Copyright (c) 2016, Yuce Tekol <[email protected]>.
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:

* Redistributions of source code must retain the above copyright
  notice, this list of conditions and the following disclaimer.

* Redistributions in binary form must reproduce the above copyright
  notice, this list of conditions and the following disclaimer in the
  documentation and/or other materials provided with the distribution.

* The names of its contributors may not be used to endorse or promote
  products derived from this software without specific prior written
  permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.