Simple Internet Radio does not work with ESP32 board manager 3.0.3

[timtamneil]

I am using an ESP32-S3-WROOM-1 board and a PCM5102 in the simplest configuration. When I compile with Arduino-ESP32 version 2.0.17 the sketch runs perfectly. However when I update the board to 3.0.3 all I get is a loud buzzing.

What I am I missing here? Any help would be appreciated

The sketch is as follows:

/*
This will only work when compiled with version 2.0.17 esp32 in board manager

*/
#include <Arduino.h>
#include <WiFi.h>
#include "Audio.h" //see my repository at github "https://github.com/schreibfaul1/ESP32-audioI2S"

#define I2S_DOUT 47
#define I2S_BCLK 48
#define I2S_LRC 45

Audio audio;

String ssid = "xxxxxx";
String password = "xxxxxx";

//**************************************************************************************************
// S E T U P *
//**************************************************************************************************
void setup() {

Serial.begin(115200);

WiFi.begin("xxxxxx", "xxxxxx");
while (WiFi.status() != WL_CONNECTED){
    delay(2000);
    Serial.print(".");
}
Serial.println("Connect to xxxxxx");

audio.setPinout(I2S_BCLK, I2S_LRC, I2S_DOUT);
audio.setConnectionTimeout(1000, 1000);
audio.setVolume(21); // 0...21
audio.connecttohost("http://peacefulpiano.stream.publicradio.org/peacefulpiano.aac"); //  128k mp3

}
//**************************************************************************************************
// L O O P *
//**************************************************************************************************
void loop()
{
audio.loop();
}
//**************************************************************************************************
// E V E N T S *
//**************************************************************************************************
void audio_info(const char *info){
Serial.print("audio_info: "); Serial.println(info);
}

[schreibfaul1]

I don't think it has anything to do with V3.0.3. I have used a new AAC decoder, probably bytes were lost when writing to I2S. The "Peacefulpiano" Station now has been running for many minutes without any dropouts.

[timtamneil]

Thanks for your quick reply - where do I get the AAC decoder that you have used successfully?

[timtamneil]

The latest repository for this library contains a very different aac_decoder.h, so it looks like the issue
was as you say and the latest decoder in the repository works