Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FPGA-readBridge -hf 0 issue #2

Open
rokzitko opened this issue Sep 15, 2021 · 2 comments
Open

FPGA-readBridge -hf 0 issue #2

rokzitko opened this issue Sep 15, 2021 · 2 comments

Comments

@rokzitko
Copy link

First let me thank you for putting together this very nice solution for developing on DE10* platforms.

I have some issues that I'll split into separate github issues to keep track.

The first one is that on DE10-nano, FPGA-readBridge -hf 0 hangs, right after "Bridge: HPS-to-FPGA". The chip goes into a hard lock, then the watchdog reboots the device after a while. I experience no such issue on DE10-std, though.

Kind regards,
Rok

@robseb
Copy link
Owner

robseb commented Sep 15, 2021

Is related to MSEL misconfiguration #3

@rokzitko
Copy link
Author

rokzitko commented Sep 16, 2021

I am not sure. I use the same MSEL settings. This is the output from DE10std:


**********************************************************************************************************
*                                                                                                        *
*                     ########   ######     ##    ##  #######   ######  ########  #######                *
*                     ##     ## ##    ##     ##  ##  ##     ## ##    ##    ##    ##     ##               *
*                     ##     ## ##            ####   ##     ## ##          ##    ##     ##               *
*                     ########   ######        ##    ##     ## ##          ##    ##     ##               *
*                     ##   ##         ##       ##    ##     ## ##          ##    ##     ##               *
*                     ##    ##  ##    ##       ##    ##     ## ##    ##    ##    ##     ##               *
*                     ##     ##  ######        ##     #######   ######     ##     #######                *
*                                                                                                        *
*                    --    Embedded Yocto based Linux Distro for Intel SoC-FPGAs          --             *
*                    ---        created by Robin Sebastian (github.com/robseb)           ---             *
*                    ---                   Contact: [email protected]                        ---             *
**********************************************************************************************************

-- Git Repository: https://github.com/robseb/rsyocto
-- VERSION:       1_042
-- KERNEL:        "linux-socfpga 5.11"
-- BUILD:         10 Apr 2021
-- FPGA:          Intel Cyclone V
-- BOARD:         Terasic DE10 Standard
-- IMAGE:         "rsYocto_1_042_DE10STD.img"
-- PACKING DATE:  11.04.2021
-- FPGA PROJECT:  "DE10STDrsyocto.qpf"
--FOLDER NAME:    socfpgaPlatformGenerator
 -- MAIN FEATURES:
    python3, pip3, django, sqlite, openSSH Server, apache2, php,
    gcc, gcc++, make, cmake, wget, curl, gdb server, gatord, time, nano,
    minicom, i2c-tools, spi-tools, usbutils, ethtool, iputils, git, can-tools,
    rstools, opkg, update-rc.d, crontab, devmem, iproute2, devmem, iproute2, iw
 -- FPGA:
    Sys_ID, LEDs, Switches, ADC, Seven Segment Display, Display, ...
 -- INCLUDE:
   Intel hwlib for CY5
 -- WEBITERFACE:
   Pinout and Info Page
   ***********************************************************************************************************

[email protected]'s password:
Warning: untrusted X11 forwarding setup failed: xauth key data not generated
Last login: Wed Sep 15 15:06:31 2021 from 192.168.2.155
root@cyclone5:~#  FPGA-readMSEL
-- Read the MSEL-Switch Status with the FPGA Manager of Intel Cyclone V  --
      MSEL-switch postion:
MSEL[4..0]       : 00100 [0x04]
MODE             : Passive Parallel x16 (FPPx16)
POR Delay        : Slow power on
Security         : AES Encryption Disabled
cdratio          : x1
cfgwdth		  : 0
Partial Reconfig.: supported
Data Compression : Disabled

Note: cdratio: Clock-to-data ratio field
      cfgwdth: Configuration data width bit

root@cyclone5:~# FPGA-readBridge -lw 0
	------- Read a FPGA Register via a HPS-to-FPGA Bridge -------
	Bridge:      Lightweight HPS-to-FPGA
	Brige Base:  0xff200000
	Your Offset: 0x0
	Address:     0xff200000
-------------------------------------------------------------------------------------
			      Value: 0 [0x0]
-------------------------------------------------------------------------------------
No  | 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
Bit |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |
-------------------------------------------------------------------------------------
No  | 15 | 14 | 13 | 12 | 11 | 10 | 09 | 08 | 07 | 06 | 05 | 04 | 03 | 02 | 01 | 00 |
Bit |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |
-------------------------------------------------------------------------------------
Reading was successfully

root@cyclone5:~# FPGA-readBridge -hf 0
	------- Read a FPGA Register via a HPS-to-FPGA Bridge -------
	Bridge:      HPS-to-FPGA
	Brige Base:  0xc0000000
	Your Offset: 0x0
	Address:     0xc0000000
-------------------------------------------------------------------------------------
			      Value: 591751049 [0x23456789]
-------------------------------------------------------------------------------------
No  | 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
Bit |  0 |  0 |  1 |  0 |  0 |  0 |  1 |  1 |  0 |  1 |  0 |  0 |  0 |  1 |  0 |  1 |
-------------------------------------------------------------------------------------
No  | 15 | 14 | 13 | 12 | 11 | 10 | 09 | 08 | 07 | 06 | 05 | 04 | 03 | 02 | 01 | 00 |
Bit |  0 |  1 |  1 |  0 |  0 |  1 |  1 |  1 |  1 |  0 |  0 |  0 |  1 |  0 |  0 |  1 |
-------------------------------------------------------------------------------------
Reading was successfully

With DE10-nano, lightweight bridge works, but not the HPS-FPGA bridge:

**********************************************************************************************************
*                                                                                                        *
*                     ########   ######     ##    ##  #######   ######  ########  #######                *
*                     ##     ## ##    ##     ##  ##  ##     ## ##    ##    ##    ##     ##               *
*                     ##     ## ##            ####   ##     ## ##          ##    ##     ##               *
*                     ########   ######        ##    ##     ## ##          ##    ##     ##               *
*                     ##   ##         ##       ##    ##     ## ##          ##    ##     ##               *
*                     ##    ##  ##    ##       ##    ##     ## ##    ##    ##    ##     ##               *
*                     ##     ##  ######        ##     #######   ######     ##     #######                *
*                                                                                                        *
*                    --    Embedded Yocto based Linux Distro for Intel SoC-FPGAs          --             *
*                    ---        created by Robin Sebastian (github.com/robseb)           ---             *
*                    ---                   Contact: [email protected]                        ---             *
**********************************************************************************************************

-- Git Repository: https://github.com/robseb/rsyocto
-- VERSION:       1_042
-- KERNEL:        "linux-socfpga 5.11"
-- BUILD:         10 Apr 2021
-- FPGA:          Intel Cyclone V
-- BOARD:         Terasic DE10 Nano
-- IMAGE:         "rsYocto_1_042_D10NANO.img"
-- PACKING DATE:  11.04.2021
-- FPGA PROJECT:  "DE10NANOrsyocto.qpf"
--FOLDER NAME:    socfpgaPlatformGenerator
 -- MAIN FEATURES:
    python3, pip3, django, sqlite, openSSH Server, apache2, php,
    gcc, gcc++, make, cmake, wget, curl, gdb server, gatord, time, nano,
    minicom, i2c-tools, spi-tools, usbutils, ethtool, iputils, git, can-tools,
    rstools, opkg, update-rc.d, crontab, devmem, iproute2, devmem, iproute2, iw
 -- FPGA:
    Sys_ID, LEDs, Switches, ADC, Seven Segment Display, Display, ...
 -- INCLUDE:
   Intel hwlib for CY5
 -- WEBITERFACE:
   Pinout and Info Page
   ***********************************************************************************************************

[email protected]'s password:
Warning: untrusted X11 forwarding setup failed: xauth key data not generated
root@cyclone5:~# FPGA-readMSEL
-- Read the MSEL-Switch Status with the FPGA Manager of Intel Cyclone V  --
      MSEL-switch postion:
MSEL[4..0]       : 00100 [0x04]
MODE             : Passive Parallel x16 (FPPx16)
POR Delay        : Slow power on
Security         : AES Encryption Disabled
cdratio          : x1
cfgwdth		  : 0
Partial Reconfig.: supported
Data Compression : Disabled

root@cyclone5:~# FPGA-readBridge -lw 0
	------- Read a FPGA Register via a HPS-to-FPGA Bridge -------
	Bridge:      Lightweight HPS-to-FPGA
	Brige Base:  0xff200000
	Your Offset: 0x0
	Address:     0xff200000
-------------------------------------------------------------------------------------
			      Value: 1 [0x1]
-------------------------------------------------------------------------------------
No  | 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
Bit |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |
-------------------------------------------------------------------------------------
No  | 15 | 14 | 13 | 12 | 11 | 10 | 09 | 08 | 07 | 06 | 05 | 04 | 03 | 02 | 01 | 00 |
Bit |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  0 |  1 |
-------------------------------------------------------------------------------------
Reading was successfully
root@cyclone5:~# FPGA-readBridge -hf 0
	------- Read a FPGA Register via a HPS-to-FPGA Bridge -------
	Bridge:      HPS-to-FPGA
	Brige Base:  0xc0000000
	Your Offset: 0x0
client_loop: send disconnect: Broken pipe

The amount of output before the hang is variable.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants