Name	Name	Last commit message	Last commit date
parent directory ..
__tests__/test-validator	__tests__/test-validator
src	src
README.md	README.md
package.json	package.json

Validator Bonds CLI

CLI for Validator Bonds contract.

Working with CLI

To install the CLI as global npm package

npm install -g @marinade.finance/validator-bonds-cli@latest

For detailed information on NPM packages installation and execution see section NPM package installation.

Successful installation will be shown in similar fashion to this output

added 165 packages in 35s

17 packages are looking for funding
  run `npm fund` for details

# to verify installed version
validator-bonds --version
2.0.3

To get info on available commands

validator-bonds --help

Requirements: Node.js version 16 or higher.

Required steps for a validator to be eligible for stake distribution

creating a bond
funding the bond
bidding for the stake
track that the bond is sufficiently funded

In terms of CLI commands in the most simplistic way:

# initializing the bond account for vote-account
validator-bonds init-bond --vote-account <vote-account-address> \
  --validator-identity ./validator-identity.json
> Bond account BondAddress9iRYo3ZEK6dpmm9jYWX3Kb63Ed7RAFfUc of config vBoNdEvzMrSai7is21XgVYik65mqtaKXuSdMBJ1xkW4 successfully created

# create a random keypair for a stake account to be created and funded to bond
# the Validator Bonds program does not preserve stake account public keys as it merges and splits them
solana-keygen new -o /tmp/stake-account-keypair.json

# Creating a stake account. The SOLs will be funded to the Bond
solana create-stake-account <stake-account-keypair> <Amount of SOL 1 for every 10,000 staked>

# To couple the created stake account with the vote account
# This causes the stake account to be in the Activating state.
solana delegate-stake <stake-account-pubkey> <vote-account-address>

# Funding Bond by assigning the stake account with the SOL amount in it
validator-bonds fund-bond <vote-account-address> --stake-account <stake-account-pubkey>

# Bidding the auction
# --max-stake-wanted specifies the maximum amount of stake the validator aims to receive. The actual amount delegated will depend on the auction and may be equal to or less than this value.
# --cpmpe defines how many lamports the validator is willing to pay for every 1000 SOLs delegated
validator-bonds configure-bond <vote-account-address> --authority ./validator-identity.json \
  --cpmpe <lamports> --max-stake-wanted <lamports>
> Bond account BondAddress9iRYo3ZEK6dpmm9jYWX3Kb63Ed7RAFfUc successfully configured

# Check the new configuration and track the funding
validator-bonds show-bond <vote-account-address>

Creating a bond

A bond account can be created for any validator.

The bond account is strictly coupled with a vote account.

It can be created in two ways:

permission-ed: --validator-identity <keypair-wallet> signature is needed. One may then configure additional authority that permits future changes at the bond account with argument --bond-authority (the bond authority can be set at this point to anything).
permission-less: anybody may create the bond account. For any future configuration change of bond account, or for withdrawal funds, the validator identity signature is needed (the bond authority is set to identity of the validator at this point).

On the bond account:

there can be only one bond for a vote account
every bond is attached to a vote account

# permission-ed: bond account at mainnet
validator-bonds -um init-bond -k <fee-payer-keypair> \
  --vote-account <vote-account-pubkey> --validator-identity <validator-identity-keypair> \
  --bond-authority <authority-on-bond-account-pubkey> \
  --rent-payer <rent-payer-account-keypair>

# permission-less: bond account at mainnet
validator-bonds -um init-bond -k <fee-payer-keypair> \
  --vote-account <vote-account-pubkey> --rent-payer <rent-payer-account-keypair>

# to configure bond account properties
validator-bonds -um configure-bond --help

Bond creation details

The init-bond command initiates the creation of an account on the blockchain containing configuration data specific to a particular bond. This bond account is intricately linked with a corresponding vote account. The creation of a bond account requires a validator's identity signature, specifically one associated with the vote account.

The parameters and their meanings are explained in detail below:

--k <fee-payer-keypair>: This parameter designates the account used to cover transaction costs (e.g., 5000 lamports).
--vote-account: Specifies the vote account on which the bond will be established.
--validator-identity: Represents the required signature; the validator identity must match one within the designated vote account.
--bond-authority: Refers to any public key with ownership rights. It is recommended to use a ledger or multisig. This key does not necessarily need to correspond to an existing on-chain account (SOL preloading is unnecessary).
--rent-payer: This account covers the creation cost of the Solana bond account, and it is expected to be the same as the fee payer (default). The rent cost is 0.00270048 SOL. Note that the --rent-payer is unrelated to bond security or "funding," which is addressed through a separate instruction. The bond's security is established by providing a stake account. The lamports in the stake account then corresponds to the SOL amount added to the security of the bond account. There is no direct payment of SOLs to the bond; it is accomplished solely by allocating stake accounts.
--cpmpe: Cost per mille per epoch, in lamports. How many lamports the validator is willing to pay for every 1000 SOLs delegated. The property configures the bid the Bond owner wishes to pay for receiving delegated stake. The maximum delegated stake is defined by max-stake-wanted. The actual amount of delegated stake is influenced by constraints defined by the delegation strategy. The cpmpe value goes into the auction where compared with other bids the delegation strategy determines the actual amount of stake delegated to the vote account linked to the Bond account.
--max-stake-wanted: The maximum stake, in lamports(!), that the Bond owner desires to get delegated from the delegation strategy. The funded bond is charged only for the amount of stake that was actually delegated (if nothing is delegated, nothing is charged).

Show the bond account

validator-bonds -um show-bond <bond-or-vote-account-address>

To display all details about the Bond use --with-funding and --verbose parameters. Gathering all the details require multiple calls to RPC node and does not work properly with public RPC node (moniker -um or --rpc-url mainnet-beta). Use some other RPC node url as described at https://solana.com/rpc.

RPC_URL=<url-to-solana-rpc-node>
validator-bonds -u$RPC_URL show-bond <bond-or-vote-account-address> --with-funding --verbose

Expected output on created bond is like

{
  programId: 'vBoNdEvzMrSai7is21XgVYik65mqtaKXuSdMBJ1xkW4',
  publicKey: '...',
  account: {
    config: 'vbMaRfmTCg92HWGzmd53APkMNpPnGVGZTUHwUJQkXAU',
    voteAccount: '...',
    authority: '...'
    costPerMillePerEpoch: "1000 lamports",
    maxStakeWanted: "10000 SOLs"
  },
  amountOwned: "10.024261277 SOLs",
  amountActive: "10.024261277 SOLs,
  numberActiveStakeAccounts: 1,
  amountAtSettlements: "0 SOL",
  numberSettlementStakeAccounts: 0,
  amountToWithdraw: "0 SOL",
  withdrawRequest: '<NOT EXISTING>'
}

NOTE: for more details on 429 Too Many Requests check the section Troubleshooting

Bond account configuration

The Bond owner may configure following properties of the account:

--bond-authority: The authority that, when signing the configuration transaction, allows changes to the Bond account configuration and withdrawal of funds. The validator identity keypair of the linked vote account or the owner of the SPL minted configuration token also has this ability.
--cpmpe: Cost per mille per epoch (in lamports). It's a bid used in the delegation strategy auction. The Bond owner agrees to pay this amount in lamports to get stake delegated to the vote account for one epoch.
--max-stake-wanted In lamports, the maximum amount of stake that the Bond owner desires to get delegated to their vote account.

Permission-ed Configure workflow

When creating the bond account in a permission-ed manner (as described in section Creating a Bond), the authority is defined upfront. This authority is then used for changing Bond account configuration. (If one prefers not to sign the CLI transaction with the validator identity key, they can utilize the mint-configure workflow.)

When authority is configure then use

validator-bonds -um configure-bond <bond-or-vote-account-address> \
  --authority <authority-or-validator-identity.keypair> \
  --bond-authority <new-bond-authority-pubkey>

Permission-less Mint - Configure workflow

An alternative step, the permission-less mint workflow is available only for special purposes. For configuration, it is typically recommended to use the validator identity signature, as described in permission-ed configure workflow.

The owner of the validator identity key has permission to configure the bond account. To verify the ownership of the validator identity key without requiring the CLI-generated transaction signature and sending it on-chain, one can use Bond's token minting. Use the command mint-bond:

validator-bonds -um mint-bond <bond-or-vote-account-address>

After executing this command, the Bond program creates an SPL token that is transferred to the wallet of the validator identity. The owner of the validator identity keypair may transfer the token to any other account using standard means. Later, when they want to configure the bond account, it's required to verify ownership of the Bond's SPL token. The owner of the token signs the CLI generated transaction, and the Bonds program burns the Bond's SPL token, allowing configuration of the authority.

validator-bonds -um configure-bond <bond-or-vote-account-address> \
  --authority <spl-token-owner-keypair> \
  --bond-authority <new-bond-authority-pubkey> \
  --with-token

Funding Bond Account

! NEVER fund a bond with a SOL transfer. Bond funding happens by assigning a stake account to the Bond.

! NEVER fund a bond by manually assigning the withdraw authority under the Bond PDA. Funding a Bond should be done using the fund_bond instruction.

The bond account exists to be funded, where the funds may be used to cover a protected event when a validator under-performs or experiences a serious issue. The funds are used when the validator bids in an auction. "Funding the bond" consists of two steps:

Charging lamports to a stake account.
Assigning ownership of the stake account to the Validator Bonds program using the fund-bond CLI command.

The funded stake account:

Must be delegated to the vote account belonging to the bond account.
Must be activating or activated.

All lamports held in the stake accounts are considered part of the protected stake amount.

validator-bonds -um fund-bond <bond-or-vote-account-address> \
  --stake-account <stake-account-address> \
  --stake-authority <withdrawer-stake-account-authority-keypair>

The meanings of parameters are as follows:

<bond-or-vote-account-address>: bond account that will be funded by the amount of lamports from the stake account.
--stake-account: address of the stake account that will be assigned under the bonds program.
--stake-authority: signature of the stake account authority (probably withdrawer) that permits to change the stake account authorities

How to add more funds under the bond?

It's as simple as creating a new stake account and funding it into the bond program. The amounts of SOLs delegated to the same validator are summed together. The validator bonds program may merge or split the accounts delegated to the same validator. It's not guaranteed to maintain the same stake accounts in the bond, but the amount of SOLs is always associated with the validator.

Validator Bonds and funding with stake accounts

The concept of Bonds revolves around managing stake accounts delegated to validators. This allows the validator to lock funds under the Validator Bonds Program while still earning inflation rewards. However, Validator Bonds Program is not designed to preserve the specific stake accounts (i.e, its public keys) that were initially funded. Instead, the funding is considered as the total sum of lamports across various stake accounts.

When a settlement event occurs, the funded stake account is split, and a portion of the funds is used for the Settlement. After the settlement is closed, any non-claimed lamports remaining in the stake account are returned to the bond's available resources, making them eligible for withdrawal. As a result, there are now two stake accounts. These stake accounts can later be merged if needed to create a larger, compound amount for future settlement funding.

Withdrawing Bond Account

When someone chooses to stop participating in covering the bonds for protected events, they can withdraw the funds by transferring ownership of the stake accounts back to the original owner (i.e., stake account authorities are transferred to --withdrawer).

This process involves two steps:

Initialize a withdrawal request, which means creating an on-chain account (a ticket) informing the protected event system about the intention to withdraw funds.
Only after the lockup period elapses — currently after 3 epochs — can one claim the withdrawal request and regain ownership of the funds held in the stake account.

WARNING: The amount specified in the withdrawal request ticket account is no longer counted as part of the funded bond amount. When participating in bond auctions, always verify the active stake recognized by the system using the show-bond CLI command.

NOTE: The withdrawal request account remains on-chain until canceled. See details and consequences in the section [Canceling Withdraw Request](#cancelling-withdraw-request

To initialize the withdrawal request, one needs to define the maximum number of lamports that are requested to be withdrawn upon claiming. The amount defined on creating withdraw request can be bigger than amount funded to bond.

IMPORTANT: If you want to withdraw all SOLs from the funded bond, use ALL as value for --amount argument.

For claiming, one may define --withdrawer as the public key where the claimed stake accounts will be assigned (by withdrawer and staker authorities) to. When not defined, the default wallet keypair address is used (~/.config/solana/id.json) as the new owner of the stake accounts.

# 1) Initialize withdraw request
validator-bonds -um init-withdraw-request <bond-or-vote-account-address> \
  --authority <bond-authority-keypair> \
  --amount <number-of-requested-lamports-to-be-withdrawn __OR__ "ALL">

# 2) Claim existing withdraw request
validator-bonds -um claim-withdraw-request <withdraw-request-or-bond-account-address> \
  --authority <bond-authority-keypair> \
  --withdrawer <user-pubkey>

The meanings of parameters are as follows:

<bond-or-vote-account-address>: The bond account from which funds (i.e., where stake accounts are withdrawn) will be taken.
--authority: The bond account authority with permission to make changes to the bond account. This can be either the configured public key in the bond account (see configure-bond above) or the validator identity.
--amount: The max amount of lamports to be later withdrawn from the bonds program on claiming. The amount can only be specified when creating the withdrawal request. If a different amount needs to be withdrawn, the old request must be canceled, a new withdrawal request with the desired amount must be created and you must wait for a few epochs (by default, 3 epochs) before claiming is possible.
--withdrawer: The new owner of the withdrawn stake accounts (the staker and withdrawer authorities are assigned to --withdrawer public key).

Technical details on creating withdraw request and claiming

When creating a withdrawal request, a specific number of lamports is designated for withdrawal after the delayed claiming period (3 epochs). This represents the maximum amount that can be withdrawn. However, during the delayed claiming period, staking rewards may accrue, resulting in a discrepancy between the requested withdrawal amount and the actual available lamports in the stake accounts. The system only allows withdrawal of the specified amount in the withdrawal request.

At time of withdrawal (claim-withdraw-request), one must specify the stake account from which the amount will be taken. This typically results in splitting the stake account, where one portion of lamports is transferred to the withdrawer, while the remaining portion is retained in the validator bonds contract.

However, a split stake account issue may arise if the requested withdrawal amount is not conducive to creating viable delegated stake accounts.

A viable stake account must include an amount to cover the rent deposit (~0.002282880 SOL for a stake account). The rent is not part of the delegated amount but is a base requirement for any account created on Solana. Additionally, a viable delegated stake account must have some SOL beyond the rent deposit. Currently, Solana requires a minimum of 1 lamport for this purpose, but this requirement may change in the future.

The contract mirrors this requirement by defining the Config parameter minimum_stake_lamports, which enforces a minimum amount for each stake account, ensuring that this amount is locked within any stake account. This is particularly important for stake accounts funded into a Settlement, as such stake account locks this amount until the Settlement is closed and reset.

Failure to meet the minimum stake account size may result in the claim-withdraw-request operation failing. For more details on withdrawal issues, refer to the FAQ section on failed withdrawal requests.

Cancelling Withdraw Request Account

The withdrawal request can be cancelled at any time.

validator-bonds -um cancel-withdraw-request <withdraw-request-or-bond-account-address> \
  --authority <bond-authority-keypair>

The intention to withdraw funds from the bond account is signaled by creating an on-chain withdrawal request account. This account remains until it is manually canceled. Only one withdrawal request can exist per bond at a time.

If the bond owner wishes to change the withdrawal amount or have the amount considered as part of the funded bond again, they must cancel the existing request and create a new withdrawal request if needed.

NOTE: When the owner uses --amount ALL during withdrawal, the system sets the amount to the maximum possible value. Any future bond funding will also be considered as withdrawable and thus not counted to bond funded amount. The existence of a withdrawal request can be verified using the show-bond command.

Show Validator Bonds Program Configuration

The global configuration for the Validator Bonds Program is stored on-chain in a config account, which can be viewed using the show-config command. The address of the Marinade config account is vbMaRfmTCg92HWGzmd53APkMNpPnGVGZTUHwUJQkXAU.

Configuration parameters:

epochsToClaimSettlement: Number of epochs during which a Settlement is available for claiming after its creation.
slotsToStartSettlementClaiming: Number of slots that must elapse after a Settlement is created before claiming is permitted.
withdrawLockupEpochs: Number of epochs that must elapse before a Bonds withdrawal request can be claimed.
minimumStakeLamports: Minimum size of a stake account when working with split stakes.
minBondMaxStakeWanted: Minimal value in lamports to be permitted being defined for bond --max-stake-wanted parameter.

# Global configuration of Marinade Validator Bonds Program
validator-bonds -um show-config vbMaRfmTCg92HWGzmd53APkMNpPnGVGZTUHwUJQkXAU

Searching Bonds funded stake accounts

Bond program assigns the funded stake accounts with withdrawal authority of address 7cgg6KhPd1G8oaoB48RyPDWu7uZs51jUpDYB3eq4VebH. To query the all stake accounts one may use the RPC call of getProgramAccounts.

Technical details of the stake account layout can be found in Solana source code for staker and withdrawer and for voter pubkey.

STAKER_OFFSET = 12 // 4 for enum, 8 rent exempt reserve
WITHDRAWER_OFFSET = 44 // 4 + 8 + staker pubkey
VOTER_PUBKEY_OFFSET = 124 // 4 for enum + 120 for Meta

RPC_URL='https://api.mainnet-beta.solana.com'
curl $RPC_URL -X POST -H "Content-Type: application/json" -d '
  {
    "jsonrpc": "2.0",
    "id": 1,
    "method": "getProgramAccounts",
    "params": [
      "Stake11111111111111111111111111111111111111",
      {
        "encoding": "base64",
        "dataSlice": {
            "offset": 0,
            "length": 0
        },
      "filters": [
          {
            "memcmp": {
              "offset": 44,
              "bytes": "7cgg6KhPd1G8oaoB48RyPDWu7uZs51jUpDYB3eq4VebH"
            }
          }
        ]
      }
    ]
  }
' | jq '.'

Support for Ledger signing

Any signature can be generated using Ledger by specifying either the pubkey (usb://ledger/9rPVSygg3brqghvdZ6wsL2i5YNQTGhXGdJzF65YxaCQd) or the path (usb://ledger?key=0/0) as the parameter value. For instance, if the bond authority is set up to be controlled by a key managed on Ledger, the command can be executed as follows:

# using solana-keygen to find pubkey on a particular derivation path
solana-keygen pubkey 'usb://ledger?key=0/3'

# using the ledger to sign as the authority to change the bond account configuration
validator-bonds -um configure-bond \
  --authority 'usb://ledger?key=0/3' --bond-authority <new-authority-pubkey> \
  <bond-account-address>

The support for ledger came from @marinade.finance/ledger-utils TS implementation wrapper around @ledgerhq/hw-app-solana. The implementation tries to be compatible with way how solana CLI behaves.

NPM packages installation and execution

To verify the installation folders for NPM and to install the package globally, check the configuration. The default properties and potentially existing .npmrc configuration file can be checked with the command npm config list.

To check where NPM packages are and will be installed:

# Get npm global installation folder
npm list -g
> /usr/lib
> +-- @marinade.finance/[email protected]
> ...
# In this case, the `bin` folder is located at /usr/bin

To verify the configuration of paths, use:

npm config get cache
npm config get prefix

If there are defined folders accessible only by the root account, configure the user workspace local configuration as follows:

npm config set cache ~/.cache/npm
npm config set prefix ~/.local/share/npm

With this configuration, NPM packages will be installed under the prefix directory.

npm i -g @marinade.finance/validator-bonds-cli@latest
npm list -g
> ~/.local/share/npm/lib
> `-- @marinade.finance/[email protected]

To execute the installed packages from any location, configure the PATH to place the newly defined user workspace local installation before others.

# the nodejs binaries reside in '~/.local/share/npm/bin' for this particular case
NPM_LIB=`npm list -g | head -n 1`
export PATH=${NPM_LIB/%lib/bin}:$PATH

NPM Exec From Local Directory

One can use the npm exec command to install the NPM package into a local folder and execute it from there.

cd /tmp
npm install @marinade.finance/validator-bonds-cli@latest

# `node_modules` exists in the folder and contains the CLI and its dependencies
ls node_modules
# Execute from the local directory
npm exec -- validator-bonds --version