Skip to content

Latest commit

 

History

History
211 lines (152 loc) · 7.6 KB

README.md

File metadata and controls

211 lines (152 loc) · 7.6 KB
Raw

🚀 Plan A Trip To Mars 🚀

Linux macOS Windows Platform installs

Problems

1: Install the project

Getting used to programming collaboratively in python can be quite hard, as there are lots of tooling options to choose from. Therefore, the first exercise is to just be able to run the following command:

$ plan-a-trip-to-mars
Hello, World!
This is plan-a-trip-to-mars, version 0.1.1

To do this, follow the installation instructions below.

2: Editing the code

Let us try to make a change to the code. Open the file ./src/plan_a_trip_to_mars/simulation.py, and edit it such that the Jerk scenario is being run.

3: Creating a new scenario

Open the file ./src/plan_a_trip_to_mars/scenarios.py. The python class BigScenario works as a template for all the other classes that inherit it. Using the other classes (Simpl, Mayhem and Jerk) as guiding, create a new class for a Mars orbit, for example named MarsTransfer.

Figure out which methods (a function tied to a class) are needed for the new MarsTransfer class to work.

As a starting point you should be able to run the simulation with three bodies: the Sun, Earth and Mars. Their positions and velocities are not important yet, just make sure they exist in the simulation.

4: Simulate the orbit of the Earth and Mars

Now, adjust the positions and velocities of the three bodies (Sun, Earth, Mars) so that the Earth and Mars move in circular orbits around the Sun.

5: Estimate Mars opposition

Use the simulation to obtain a reasonable value for the amount of days between two Mars oppositions, that is, the amount of days that passes between two occasions that Earth and Mars are aligned with the Sun.

Tip

The base class BigScenario has a method named do_at_each_time_step(). You may make use of this in order to get an estimate of the opposition time. Think about where the do_at_each_time_step() method should be implemented. Is it used by any other scenario class?

6: Calculate delta v

Calculate the velocity needed for a rocket to travel from Earth to Mars on a Hohmann transfer orbit, i.e., the relative velocity with respect to Earth.

7: Simulate the transfer time

Using the program, obtain a reasonable number for the amount of days it takes for the rocket to complete the transfer orbit, i.e., the amount of days until it arrives at Mars. You should use your answer from problem 4 to place the Earth and Mars in a good position for the transfer orbit.

8: Calculate delta v

How much must the velocity of the rocket increase upon arrival at Mars if it were to follow the same orbit? Give the rocket a kick on the day of arrival and confirm that the rocket and Mars move as a pair.

9: Catching up with Mars

If the rocket missed on the timing of the transfer orbit, but is on Mars's orbit just some distance behind, how would you adjust its velocity so that it overtakes Mars? Explain.

10: Final

A rocket sits on a circular trajectory when a sudden impact in the radial direction sends it on a parabolic trajectory. Find the velocity needed to get it on a parabolic trajectory, and the closest point the parabolic trajectory will have to the centre object. Simulate the path it takes.

Install

The project is packaged with Pixi and Uv, and additionally solved for Conda. All three installation alternatives are available for all three major platforms: Linux, OSX and Windows. You will need to use one of them to install this project.

Uv

Uv is a python-only tool for handling your project, and extremely fast.

Install Uv via their website.

Pixi

Pixi is similar to anaconda (just younger/more modern) and I have tested that it works with for example Spyder.

Install Pixi via their website.

Conda

Conda has been around for a long time and has widespread support. The files that specify the environments are generated using Pixi, as

environment.linux-64.yml
environment.osx-64.yml
environment.osx-arm64.yml
environment.win-64.yml

Visit the Conda website for installation instructions.

Package plan-a-trip-to-mars

You will now need to clone the repository and cd into it. This is done using git. Alternatively, you can download the repository in a zip-file from GitHub.

git clone https://github.com/flottflyt/plan-a-trip-to-mars.git
cd plan_a_trip_to_mars || exit 1

Now you can install the project with either Uv, Pixi or Conda:

# uv
uv sync
# pixi
pixi install
# conda (replace the file name to match your operating system platform)
conda env create --name name-of-my-env --file environment.linux-64.yml

Running the code

You will now be able to run the python code! This can be done in two ways with slightly different syntax depending on if you used Uv, Pixi or Conda to install the project.

# uv
uv run plan-a-trip-to-mars
uv run python ./src/plan_a_trip_to_mars/simulation.py
# pixi
pixi run --environment spyder plan-a-trip-to-mars
pixi run --environment spyder python ./src/plan_a_trip_to_mars/simulation.py
# conda
conda run -n name-of-my-env plan-a-trip-to-mars
conda run -n name-of-my-env python ./src/plan_a_trip_to_mars/simulation.py
Note on virtual environments

When working on a python project, the best practice is to work inside a virtual environment. This can be confusing to begin with, but the pros massively outweighs the cons. Many programs exist the creates and manages virtual environments, and both Pixi and Uv will do this automatically for you!

Many good alternatives for working with python using virtual environments exist. Pick your favourite and learn how to use it.

Usage

Scenario constants

Five scenario constants exists:

  • SIZE: The length of the sides of the simulation, in metres.
  • TOT_TIME: The total time of the simulation, in units of spi. That is, changing the spi will change the unit of the total time (e.g. seconds to hours). This value decides how many iterations the simulation will use.
  • FPS: The frame rate of the animation. After the simulation has been calculated, only every n-th iteration is used (for FPS=n). Useful if you need high temporal resolution, but a faster simulation.
  • TIME_SCALE: The clock shown in the animation is divided by TIME_SCALE, effectively changing the time unit.
  • UNIT: Add a time unit to the simulation clock.

Universe().set_spi()

The spi decides how many seconds pass per iteration (seconds-per-iteration). By default, everything is calculated using SI units, meaning seconds for time. This quickly become computationally expensive when you want to simulate a solar system. Setting the spi to 3600 will instead update all positions, velocities, etc. every hour. Be careful to also change the timing of events; the time of a rocket's kick is now specified in hours.