Skip to content
This repository has been archived by the owner on May 16, 2023. It is now read-only.

Latest commit

 

History

History
270 lines (220 loc) · 24.2 KB

README.md

File metadata and controls

270 lines (220 loc) · 24.2 KB

Filebeat Helm Chart

Build Status Artifact HUB

This Helm chart is a lightweight way to configure and run our official Filebeat Docker image.

Warning When it comes to running the Elastic on Kubernetes infrastructure, we recommend Elastic Cloud on Kubernetes (ECK) as the best way to run and manage the Elastic Stack.

ECK offers many operational benefits for both our basic-tier and our enterprise-tier customers, such as spinning up cluster nodes that were lost on failed infrastructure, seamless upgrades, rolling cluster changes, and much much more.

With the release of the Elastic Stack Helm charts for Elastic version 8.5.1, we are handing over the ongoing maintenance of our Elastic Stack Helm charts to the community and contributors. This repository will finally be archived after 6 months time. Elastic Stacks deployed on Kubernetes through Helm charts will still be fully supported under EOL limitations.

Since we want to provide an even better experience for our customers by running the Elastic Stack on Kubernetes, we will continue maintaining the Helm charts applicable to ECK Custom Resources. These charts can be found in the ECK repository.

Helm charts will currently be maintained for ECK Enterprise-tier customers, however, we encourage the community to engage with the existing Helm charts for the Elastic Stack and continue supporting their ongoing maintenance.

See #1731 for more details.

Requirements

See supported configurations for more details.

Installing

Install a released version using the Helm repository

  • Add the Elastic Helm charts repo: helm repo add elastic https://helm.elastic.co

  • Install it: helm install filebeat elastic/filebeat

Install a development version using the main branch

  • Clone the git repo: git clone [email protected]:elastic/helm-charts.git

  • Install it: helm install filebeat ./helm-charts/filebeat --set imageTag=8.5.1

Upgrading

Please always check CHANGELOG.md and BREAKING_CHANGES.md before upgrading to a new chart version.

Usage notes

  • The default Filebeat configuration file for this chart is configured to use an Elasticsearch endpoint. Without any additional changes, Filebeat will send documents to the service URL that the Elasticsearch Helm chart sets up by default. The Elasticsearch credentials are also retrieved from elasticsearch-master-credentials Secret from Elasticsearch chart by default. You may either set the ELASTICSEARCH_HOSTS, ELASTICSEARCH_USER and ELASTICSEARCH_PASSWORD environment variables in extraEnvs to override this or modify the default filebeatConfig to change this behavior.
  • The default Filebeat configuration file is also configured to capture container logs and enrich them with Kubernetes metadata by default. This will capture all container logs in the cluster.
  • This chart disables the HostNetwork setting by default for compatibility reasons with the majority of kubernetes providers and scenarios. Some kubernetes providers may not allow enabling hostNetwork and deploying multiple Filebeat pods on the same node isn't possible with hostNetwork However Filebeat does recommend activating it. If your kubernetes provider is compatible with hostNetwork and you don't need to run multiple Filebeat DaemonSets, you can activate it by setting hostNetworking: true in values.yaml.
  • This repo includes several examples of configurations that can be used as a reference. They are also used in the automated testing of this chart.

Configuration

Parameter Description Default
clusterRoleRules Configurable cluster role rules that Filebeat uses to access Kubernetes resources see values.yaml
daemonset.annotations Configurable annotations for filebeat daemonset {}
daemonset.labels Configurable labels applied to all filebeat DaemonSet pods {}
daemonset.affinity Configurable affinity for filebeat daemonset {}
daemonset.enabled If true, enable daemonset true
daemonset.envFrom Templatable string of envFrom to be passed to the environment from variables which will be appended to filebeat container for DaemonSet []
daemonset.extraEnvs Extra environment variables which will be appended to filebeat container for DaemonSet see values.yaml
daemonset.extraVolumeMounts Templatable string of additional volumeMounts to be passed to the tpl function for DaemonSet []
daemonset.extraVolumes Templatable string of additional volumes to be passed to the tpl function for DaemonSet []
daemonset.hostAliases Configurable hostAliases for filebeat DaemonSet []
daemonset.hostNetworking Enable filebeat DaemonSet to use hostNetwork false
daemonset.filebeatConfig Allows you to add any config files in /usr/share/filebeat such as filebeat.yml for filebeat DaemonSet see values.yaml
daemonset.maxUnavailable The maxUnavailable value for the pod disruption budget. By default this will prevent Kubernetes from having more than 1 unhealthy pod in the node group 1
daemonset.nodeSelector Configurable nodeSelector for filebeat DaemonSet {}
daemonset.secretMounts Allows you easily mount a secret as a file inside the DaemonSet. Useful for mounting certificates and other secrets. See values.yaml for an example []
daemonset.podSecurityContext Configurable podSecurityContext for filebeat DaemonSet pod execution environment see values.yaml
daemonset.resources Allows you to set the resources for filebeat DaemonSet see values.yaml
daemonset.tolerations Configurable tolerations for filebeat DaemonSet []
deployment.annotations Configurable annotations for filebeat Deployment {}
deployment.labels Configurable labels applied to all filebeat Deployment pods {}
deployment.affinity Configurable affinity for filebeat Deployment {}
deployment.enabled If true, enable deployment false
deployment.envFrom Templatable string of envFrom to be passed to the environment from variables which will be appended to filebeat container for Deployment []
deployment.extraEnvs Extra environment variables which will be appended to filebeat container for Deployment see values.yaml
deployment.extraVolumeMounts Templatable string of additional volumeMounts to be passed to the tpl function for DaemonSet []
deployment.extraVolumes Templatable string of additional volumes to be passed to the tpl function for Deployment []
daemonset.hostAliases Configurable hostAliases for filebeat Deployment []
deployment.filebeatConfig Allows you to add any config files in /usr/share/filebeat such as filebeat.yml for filebeat Deployment see values.yaml
deployment.nodeSelector Configurable nodeSelector for filebeat Deployment {}
deployment.secretMounts Allows you easily mount a secret as a file inside the Deployment Useful for mounting certificates and other secrets. See values.yaml for an example []
deployment.resources Allows you to set the resources for filebeat Deployment see values.yaml
deployment.securityContext Configurable [securityContext][] for filebeat Deployment pod execution environment see values.yaml
deployment.tolerations Configurable tolerations for filebeat Deployment []
replicas The replica count for the Filebeat deployment 1
extraContainers Templatable string of additional containers to be passed to the tpl function ""
extraInitContainers Templatable string of additional containers to be passed to the tpl function ""
fullnameOverride Overrides the full name of the resources. If not set the name will default to " .Release.Name - .Values.nameOverride or .Chart.Name " ""
hostPathRoot Fully-qualified hostPath that will be used to persist filebeat registry data /var/lib
imagePullPolicy The Kubernetes imagePullPolicy value IfNotPresent
imagePullSecrets Configuration for imagePullSecrets so that you can use a private registry for your image []
imageTag The filebeat Docker image tag 8.5.1
image The filebeat Docker image docker.elastic.co/beats/filebeat
livenessProbe Parameters to pass to liveness probe checks for values such as timeouts and thresholds see values.yaml
managedServiceAccount Whether the serviceAccount should be managed by this helm chart. Set this to false in order to manage your own service account and related roles true
nameOverride Overrides the chart name for resources. If not set the name will default to .Chart.Name ""
podAnnotations Configurable annotations applied to all filebeat pods {}
priorityClassName The name of the PriorityClass. No default is supplied as the PriorityClass must be created first ""
readinessProbe Parameters to pass to readiness probe checks for values such as timeouts and thresholds see values.yaml
serviceAccount Custom serviceAccount that filebeat will use during execution. By default will use the service account created by this chart ""
serviceAccountAnnotations Annotations to be added to the ServiceAccount that is created by this chart. {}
terminationGracePeriod Termination period (in seconds) to wait before killing filebeat pod process on pod shutdown 30
updateStrategy The updateStrategy for the DaemonSet By default Kubernetes will kill and recreate pods on updates. Setting this to OnDelete will require that pods be deleted manually RollingUpdate

FAQ

How to use Filebeat with Elasticsearch with security (authentication and TLS) enabled?

This Helm chart can use existing Kubernetes secrets to setup credentials or certificates for examples. These secrets should be created outside of this chart and accessed using environment variables and volumes.

An example can be found in examples/security.

How to install OSS version of Filebeat?

Deploying OSS version of Filebeat can be done by setting image value to Filebeat OSS Docker image

An example of Filebeat deployment using OSS version can be found in examples/oss.

Why is Filebeat host.name field set to Kubernetes pod name?

The default Filebeat configuration is using Filebeat pod name for agent.hostname and host.name fields. The hostname of the Kubernetes nodes can be find in kubernetes.node.name field. If you would like to have agent.hostname and host.name fields set to the hostname of the nodes, you'll need to set hostNetworking value to true.

Note that enabling hostNetwork make Filebeat pod use the host network namespace which gives it access to the host loopback device, services listening on localhost, could be used to snoop on network activity of other pods on the same node.

How do I get multiple beats agents working with hostNetworking enabled?

The default http port for multiple beats agents may be on the same port, for example, Filebeats and Metricbeats both default to 5066. When hostNetworking is enabled this will cause collisions when standing up the http server. The work around for this is to set http.port in the config file for one of the beats agent to use a different port.

How to change readinessProbe for outputs which don't support testing

Some Filebeat outputs like Kafka output don't support testing using filebeat test output command which is used by Filebeat chart readiness probe.

This makes Filebeat pods crash before being ready with the following message: Readiness probe failed: kafka output doesn't support testing.

The workaround when using this kind of output is to override the readiness probe command to check Filebeat API instead (same as existing liveness probe).

readinessProbe:
  exec:
    command:
      - sh
      - -c
      - |
        #!/usr/bin/env bash -e
        curl --fail 127.0.0.1:5066

Contributing

Please check CONTRIBUTING.md before any contribution or for any questions about our development and testing process.