Skip to content

Latest commit

 

History

History
858 lines (581 loc) · 49.2 KB

README.md

File metadata and controls

858 lines (581 loc) · 49.2 KB

Building Custom Platform Packages and Repositories

Please note that Heroku cannot provide support for issues related to custom platform repositories and packages.

Introduction

Background

PHP can be extended with so-called extensions, which are typically written in C and interface with the engine through specific APIs. These extensions most commonly provide bindings to native system libraries (e.g. ext-amqp for libamqp) to expose functionality to applications, but they can also hook into the PHP engine to enable certain features or insights (e.g. ext-newrelic for instrumentation).

Unlike language ecosystems such as Python or Ruby, PHP has no widely established and standardized method of compiling installing native extensions on a per-project basis during installation of an application's dependencies.

The Composer project is PHP's de-facto standard package manager. Through a composer.json file, applications express their dependencies; a dependency can be another user-land package, or a so-called platform package: a PHP runtime, or an extension. For user-land dependencies, the graph of requirements is reconciled at composer update time; platform package requirements are recorded separately. Together, they are written to the lock file, composer.lock, which enables reliable, stable installation of dependencies across environments.

If a given platform dependency cannot be fulfilled during a composer install attempt, the operation will fail. It is therefore necessary to provide the PHP runtime version that fulfills all package's requirements, and enable any required extensions (via the extension=… directive in php.ini or a .ini scan dir config) ahead of a composer install attempt.

On Heroku, when a PHP application is deployed, the composer.lock file is evaluated, and a new dependency graph that mirrors the application's platform dependencies (both direct ones and those required by other dependencies) is constructed. These requirements consist of special dependencies that contain actual platform packages, and this set of packages is then installed, before the regular installation of the application's dependencies (using a normal composer install) is performed.

How Heroku installs platform dependencies

When an application is deployed, bin/compile extracts all platform dependencies from the application's composer.lock and constructs a new composer.json. This bulk of this process is performed in bin/util/platform.php. All platform requirements (for package php, php-64bit, and any package named ext-…) are extracted, their relative structure preserved, and all required package names are prefixed with "heroku-sys/" (so php becomes heroku-sys/php).

The resulting composer.json gets written to .heroku/php/ and is distinct from the application's composer.json. It now only holds information on required platform packages, as well as a few other details such as the custom repository to use.

Assuming the following composer.json for an application:

{
	"require": {
		"php": "~7.2",
		"ext-mbstring": "*",
		"mongodb/mongodb": "^1.4"
	}
}

The relevant parts of the corresponding composer.lock would look roughly like the following:

{
	"packages": [
		{
			"name": "mongodb/mongodb",
			"version": "1.4.2",
			…
			"require": {
				"ext-hash": "*",
				"ext-json": "*",
				"ext-mongodb": "^1.5.0",
				"php": ">=5.6.0"
			}
		},
	],
	"platform": {
		"php": "~7.2",
		"ext-mbstring": "*",
		"ext-pq": "*"
	}
}

From this, the buildpack would create a "platform package" .heroku/php/composer.json like the following, with the main packagist.org repository disabled, and a few custom repositories as well as static package definitions added:

{
	"provide": {
		"heroku-sys/heroku": "18.2019.03.19"
	},
	"require": {
		"composer.json/composer.lock": "dev-5f0dbc6293250a40259245759f113f27",
		"mongodb/mongodb": "1.4.2"
	},
	"repositories": [
		{
			"packagist": false
		},
		{
			"type": "path",
			"url": "…/support/installer/",
			"options": {
				"symlink": false
			}
		},
		{
			"type": "composer",
			"url": "https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-18-stable/"
		},
		{
			"type": "package",
			"package": [
				{
					"type": "metapackage",
					"name": "mongodb/mongodb",
					"version": "1.4.2",
					"require": {
						"heroku-sys/ext-hash": "*",
						"heroku-sys/ext-json": "*",
						"heroku-sys/ext-mongodb": "^1.5.0",
						"heroku-sys/php": ">=5.6.0"
					}
				},
				{
					"type": "metapackage",
					"name": "composer.json/composer.lock",
					"version": "dev-5f0dbc6293250a40259245759f113f27",
					"require": {
						"heroku-sys/php": "~7.2",
						"heroku-sys/ext-mbstring": "*",
						"heroku-sys/ext-pq": "*"
					}
				}
			]
		}
	]
}

The structure of the originally required packages, such as mongodb/mongodb, is kept intact. This is done both to ensure that combinations requirements are taken into account the same way Composer does (two packages can have requirements for the same, say, php platform package), as well as to aid debugging: if, in the example above, ext-mongodb wasn't available on Heroku, then the error message from Composer would indicate that package mongodb/mongodb requires a non-existent package, and the user attempting the deploy would immediately understand why.

The requirements from the main composer.json, which in composer.lock are located in the platform key, are moved to their own meta-package named "composer.json/composer.lock"; this is again to ensure that these dependencies are honored correctly in combination will all the other requirements, and that users would get an immediately readable error message if a required package isn't available.

Also included, but omitted from the above example for brevity, are other packages such as the Nginx and Apache web servers, which users cannot directly specify as dependencies, but which are installed using the same mechanism as PHP or PHP extensions.

The two special repositories listed are the so-called platform repository, hosted here on S3, which holds all the required packages, and the platform installer, which is pulled in from a relative path location in the buildpack itself.

The custom Composer repository in the S3 bucket provides all of these magic heroku-sys/… packages; they are tarballs containing a binary build of PHP, or an extension, or a web server. Their metadata indicates their package type, download location, special installation hooks e.g. for activation of startup scripts, export instructions for e.g. $PATH, configuration files to copy on installation, and so forth.

The platform installer, implemented as a Heroku plugin, knows how to deal with all these details: it unpacks the binary tarballs, copies configuration files, prepares environment variable exports for $PATH so that binaries like php can be invoked.

In the example above, the ext-mbstring extension is, for example, not a standalone source package, but bundled with PHP. Unlike the ext-json and ext-hash requirements from mongodb/mongodb, which are also bundled with PHP, but always enabled, the ext-mbstring extension is built as a shared extension, and must explicitly be loaded. The metadata information for the php package contains the details of all extensions, whether compiled in statically or shared, so the installer knows, based on a list of requirements and Composer's internal installer and dependency state, that a php.ini include that explicitly loads the mbstring.so library must be generated for the application to function (because the resulting repository, as explained below, will contain a "dummy" entry for the shared ext-mbstring package).

The application also contains a requirement for the ext-pq PostgreSQL extension. This extension in turn internally requires ext-raphf. This dependency is contained in the platform repository that is used for installation, so the dependency graph will automatically contain this package, and it will be installed in the correct order: ext-raphf before ext-pq. As a result, the platform installer will generate the extension=raphf.so INI directive before the extension=pq.so INI directive, and PHP will start successfully. Were this not the case, PHP would fail to load ext-pq on startup, as pq.so could not find the raphf.so shared library it needs to function.

All these steps happen when the buildpack performs a simple composer install inside .heroku/php/ - the generated composer.json, together with the repository and plugin information inside it, takes care of the rest.

Usage in Applications

Please refer to the instructions in the main README for details on how to use a custom repository during application builds.

Building Custom Platform Packages

Overview

To use custom platform packages (either new ones, or modifications of existing ones), a new Composer repository has to be created (see the instructions in the main README for usage info). All the tooling in here is designed to work with S3, since it is reliable and cheap. The bucket permissions should be set up so that a public listing is allowed.

The folder support/build contains Bob build formulae for all packages and their dependencies.

These build formulae can have dependencies (e.g. an extension formula depends on the correct version of PHP needed to build it, and maybe on a vendored library); Bob handles downloading of dependencies prior to a build, and it's the responsibility of a build formula to remove these dependencies again if they're not needed e.g. in between running make and make install.

The build formulae are also expected to generate a manifest, which is a composer.json containing all relevant information about a package.

In support/build/_util, three scripts (deploy.sh to deploy a package with its manifest, mkrepo.sh to (re-)generate a repository from all existing manifests, and sync.sh to sync between repos) take care of most of the heavy lifting. The directory is added to $PATH in Dockerfile, so the helpers can be invoked directly.

Preparations

Packages for a platform repository are best built using a Docker container (either locally, or using on a platform like Heroku). The instructions below use docker run… locally.

Refer to the README in support/build/_docker/ for setup instructions.

The following environment variables are required:

  • WORKSPACE_DIR, must be "/app/support/build"
  • AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY with credentials for the S3 bucket
  • S3_BUCKET with the name of the S3 bucket to use for builds
  • S3_PREFIX (just a slash, or a prefix directory name with a trailing, but no leading, slash)
  • STACK (currently, only "heroku-18", "heroku-20", or "heroku-22" make any sense)

The following environment variables are highly recommended (see section Understanding Upstream Buckets):

  • UPSTREAM_S3_BUCKET where dependencies are pulled from if they can't be found in S3_BUCKET+S3_PREFIX, should probably be set to "lang-php", the official Heroku bucket
  • UPSTREAM_S3_PREFIX, where dependencies are pulled from if they can't be found in S3_BUCKET+S3_PREFIX should probably be set to
    • "dist-heroku-18-stable/", the official Heroku stable repository prefix for the heroku-18 stack.
    • "dist-heroku-20-stable/", the official Heroku stable repository prefix for the heroku-20 stack.
    • "dist-heroku-22-stable/", the official Heroku stable repository prefix for the heroku-22 stack.

The following environment variables are optional, but strongly recommended:

  • S3_REGION, to be set to the AWS region name (e.g. "s3.eu-west-1"), otherwise it will default to "s3", which is deprecated by AWS and may cause rate limit problems when resolving the bucket region from this global endpoint.

Understanding Prefixes

It is recommended to use a prefix like "dist-heroku-20-develop/" for $S3_PREFIX. The contents of this prefix will act as a development repository, where all building happens. The sync.sh helper can later be used to synchronize to another prefix, e.g. "dist-heroku-20-stable/" that is used for production. For more info, see the section on syncing repositories further below.

Understanding Upstream Buckets

If you want to, for example, host only a few PECL extensions in a custom repository, your bucket would still have to contain the build-time dependencies for those extensions - that's PHP in its various versions.

Due to the order in which Composer looks up packages from repositories, including PHP builds in your custom repositories may lead to those builds getting used on deploy, which is not what you want - you want to use Heroku's official PHP builds, but still have access to your custom-built extensions.

That's where the UPSTREAM_S3_BUCKET and UPSTREAM_S3_PREFIX env vars documented above come into play; you'll usually set them to "lang-php" and "dist-heroku-20-stable/", respectively (or whatever stack you're trying to build for).

That way, if your Bob formula for an extension contains e.g. this dependency declaration at the top:

# Build Path: /app/.heroku/php
# Build Deps: php-7.3.*

then on build, Bob will first look for "php-7.3.*" in your S3 bucket, and then fall back to pulling it from the upstream bucket. This frees you of the burden of hosting and maintaining unnecessary packages yourself.

Building a Package

To verify a formula, bob build can be used to build it:

$ docker run -ti --rm <yourimagetagname> bash
~ $ bob build extensions/no-debug-non-zts-20180731/yourextension-1.2.3

Fetching dependencies... found 1:
  - php-7.3.*
Building formula extensions/no-debug-non-zts-20180731/yourextension-1.2.3
...

If that works, a bob deploy would build it first, and then upload it to your bucket (you can specify --overwrite to overwrite existing packages).

However, that alone is not enough - the manifest needs to be in place as well, and using that manifest, you can then generate a Composer repository metadata file.

The next two sections contain important info about manifests and repositories; the tl;dr is: do not use bob deploy, but deploy.sh, to deploy a package, because it will take care of manifest uploading:

~ $ deploy.sh extensions/no-debug-non-zts-20180731/yourextension-1.2.3

In addition to an --overwrite option, the deploy.sh script also accepts a --publish option that will cause the package to immediately be published into the repository by re-generating that repo. This should be used with caution, as several parallel deploy.sh invocations could result in a race condition when re-generating the repository.

About Manifests

After a bob build or bob deploy, you'll be prompted to upload a manifest. It obviously only makes sense to perform this upload after a bob deploy.

To perform the deploy and the manifest upload in one step, the deploy.sh utility (it's on $PATH) should be used instead of bob deploy:

~ $ deploy.sh extensions/no-debug-non-zts-20180731/yourextension-1.2.3

This will upload the manifest to the S3 bucket if the package build and deploy succeeded. Like bob deploy, this script accepts a --overwrite flag.

The manifest is a composer.json specific to your built package, and it is unrelated to Bob, the utility that performs the builds. All manifests of your bucket together need to be combined into a repository.

All packages in the official Heroku S3 bucket use manifests, even for packages that are not exposed as part of the repository, such as library dependencies, the minimal PHP used for bootstrapping a build, or Composer.

Manifest Contents

A manifest looks roughly like this (example is for ext-amqp/1.11.0 for PHP 8.1 on stack heroku-20):

{
	"conflict": {},
	"dist": {
		"type": "heroku-sys-tar",
		"url": "https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-20-stable/extensions/no-debug-non-zts-20210902/amqp-1.11.0.tar.gz"
	},
	"name": "heroku-sys/ext-amqp",
	"replace": {
		"heroku-sys/ext-amqp.native": "self.version"
	},
	"require": {
		"heroku-sys/heroku": "^20.0.0",
		"heroku-sys/php": "8.1.*",
		"heroku/installer-plugin": "^1.6.0"
	},
	"time": "2019-02-16 01:18:50",
	"type": "heroku-sys-php-extension",
	"version": "5.1.17"
}

Example: curl -s https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-20-stable/packages.json | jq '[ .packages[][] | select(.type == "heroku-sys-php-extension" and .name == "heroku-sys/ext-amqp") ] | .[0]'

Package names must be prefixed with "heroku-sys/". Possible types are heroku-sys-php, heroku-sys-library, heroku-sys-php-extension, heroku-sys-program or heroku-sys-webserver. The dist type must be "heroku-sys-tar".

The special package type heroku-sys-package is used for internal packages used for bootstrapping (e.g. a minimal PHP build).

The required package heroku/installer-plugin will be available during install. Package heroku-sys/heroku is a virtual package provided by the platform composer.json generated in bin/compile and has the right stack version (either "18" or "20"); the selector for heroku-sys/php ensures that the package only applies to PHP 8.1.x.

The replace declaration for the same package name but postfixed with ".native" will allow future versions of the buildpack to attempt installation of the extension in case it was not selected by the dependency solver due to a userland package provideing it.

Manifest Helpers

All formulae use the manifest.py helper to generate the information above. Use it for maximum reliability! You can take a look at the existing formulae and the script to get a feeling for how it works.

For example, the Apache HTTPD web server is built roughly as follows:

source $(dirname $BASH_SOURCE)/_util/include/manifest.sh
curl … # download httpd
./configure --prefix="$1" …
make && make install

MANIFEST_REQUIRE="${MANIFEST_REQUIRE:-"{}"}"
MANIFEST_CONFLICT="${MANIFEST_CONFLICT:-"{}"}"
MANIFEST_REPLACE="${MANIFEST_REPLACE:-"{}"}"
MANIFEST_PROVIDE="${MANIFEST_PROVIDE:-"{}"}"
MANIFEST_EXTRA="${MANIFEST_EXTRA:-"{\"export\":\"bin/export.apache2.sh\",\"profile\":\"bin/profile.apache2.sh\"}"}"

# this gets sourced after package install, so that the buildpack and following buildpacks can invoke
cat > ${OUT_PREFIX}/bin/export.apache2.sh <<'EOF'
export PATH="/app/.heroku/php/bin:/app/.heroku/php/sbin:$PATH"
EOF
# this gets sourced on dyno boot
cat > ${OUT_PREFIX}/bin/profile.apache2.sh <<'EOF'
export PATH="$HOME/.heroku/php/bin:$HOME/.heroku/php/sbin:$PATH"
EOF

python $(dirname $BASH_SOURCE)/_util/include/manifest.py "heroku-sys-webserver" "heroku-sys/${dep_name}" "$dep_version" "${dep_formula}.tar.gz" "$MANIFEST_REQUIRE" "$MANIFEST_CONFLICT" "$MANIFEST_REPLACE" "$MANIFEST_PROVIDE" "$MANIFEST_EXTRA" > $dep_manifest

print_or_export_manifest_cmd "$(generate_manifest_cmd "$dep_manifest")"

In this example, after building the program from source and "installing" it to the right prefix, two scripts are added that take care of adding HTTPD's bin/ and sbin/ directories to $PATH during build (for following buildpacks to access), and during dyno boot (for the application to work at runtime).

Afterwards, manifest.py is passed several JSON objects as arguments for the various parts that make up the manifest. The print_or_export_manifest_cmd is then used to automatically either output instructions (when the formula is invoked via a bob build or bob deploy) on how to upload the manifest, or export the necessary manifest upload commands for automatic execution (when the formula is invoked via deploy.sh).

Manifest expansion of shared PHP extensions

For package type heroku-sys-php, the manifest.py helper will expand key/value (name/version) pairs in struct extra.shared into complete package manifests as the value; these will later be extracted into separate packages by mkrepo.sh, and the value will be reset to false.

Example "extra" argument contents to manifest.py for a PHP 8.1.1 with shared extension ext-bcmath (other arguments to manifest.py omitted):

{"shared": {"heroku-sys/ext-bcmath": "8.1.1"}}

Example generated PHP package manifest (reduced to relevant sections):

{
	"dist": {
		"type": "heroku-sys-tar",
		"url": "https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-20-develop/php-8.1.1.tar.gz"
	},
	"extra": {
		"shared": {
			"heroku-sys/ext-bcmath": {
				"dist": {
					"type": "heroku-sys-php-bundled-extension",
					"url": "https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-20-develop/php-8.1.1.tar.gz?extension=heroku-sys/ext-bcmath"
				},
				"name": "heroku-sys/ext-bcmath",
				"require": {
					"heroku-sys/heroku": "^20.0.0",
					"heroku-sys/php": "8.1.1",
					"heroku/installer-plugin": "^1.6.0"
				},
				"time": "2022-01-26 20:49:45",
				"type": "heroku-sys-php-extension",
				"version": "8.1.1"
			}
		}
	},
	"name": "heroku-sys/php",
	"time": "2022-01-26 20:49:45",
	"type": "heroku-sys-php",
	"version": "8.1.1"
}

The "embedded" manifest for ext-bcmath will be written to a separate package entry by mkrepo.sh.

Manifest Specification

The manifest for a package follows the Composer package schema, with the following changes or additions.

Minimum Information

A package must at minimum expose the following details in its manifest:

  • name
  • type
  • dist (with download type and URL)
  • time
  • require

The require key must contain dependencies on at least the following packages:

  • heroku/installer-plugin, version 1.2.0 or newer (use version selector ^1.2.0)

Example: curl -s https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-20-stable/packages.json | jq '[ .packages[][] | select(.type == "heroku-sys-php") ][0] | {require}'

If a package is built against a specific (or multiple) stacks, there must be a dependency on the following packages:

  • heroku-sys/heroku, version "18" for heroku-18, version "20" for heroku-20, or version "22" for heroku-22 (use version selectors ^18.0.0 or ^20.0.0 or ^22.0.0, or a valid Composer combination)

Example: curl -s https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-20-stable/packages.json | jq '[ .packages[][] | select(.type == "heroku-sys-php") ][0] | {require}'

If a package is of type heroku-php-extension, there must be a dependency on the following packages to ensure that the right PHP extension API is targeted during installs:

  • heroku-sys/php, with major.minor version parts specified for the PHP version series in question (either as e.g. 7.3.*, or as ~7.3.0)

Example: curl -s https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-20-stable/packages.json | jq '[ .packages[][] | select(.type == "heroku-sys-php-extension") ][0] | {require}'

Additional dependencies can be expressed as well; for example, if an extension requires another extension at runtime, it may be listed in require, with its full heroku-sys/ext-… name and a suitable version (often "*").

Example: curl -s https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-20-stable/packages.json | jq '[ .packages[][] | select(.name == "heroku-sys/ext-pq") ][0] | {require}'

Package Name

The name of a package must begin with "heroku-sys/", and the part after this suffix must be the name Composer expects for the corresponding platform package. A PHP runtime package must thus be named "heroku-sys/php", and a "foobar" extension, known to Composer as "ext-foobar", must be named "heroku-sys/ext-foobar".

Package Type

The type of a package must be one of the following:

  • 'heroku-sys-library', for a system library
  • 'heroku-sys-php', for a PHP runtime
  • 'heroku-sys-php-extension', for a PHP extension
  • 'heroku-sys-program', for executable utilities etc
  • 'heroku-sys-webserver', for a web server

Dist Type and URL

The dist key must contain a struct with key type set to "heroku-sys-tar", and key url set to the .tar.gz tarball URL of the package.

Example: curl -s https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-20-stable/packages.json | jq '[ .packages[][] | select(.type == "heroku-sys-php") ][0] | {dist}'

For "dummy" entries for extensions bundled with PHP, a type of heroku-sys-php-bundled-extension will cause no download operation to happen; however, the package will still generate an install event internally, and the package will participate in dependency resolution the same way a "real", third-party extension would. Their url field will be ignored, but should be a valid URL.

Replaces

Composer packages may replace other packages. In the case of platform packages, this is useful mostly in case of a runtime. PHP is bundled with many extensions out of the box, so the manifest for the PHP package must indicate that it contains ext-standard, ext-dom, and so forth, and thus its manifest contains a long list of heroku-sys/ext-… entries under the replace key.

Example: curl -s https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-20-stable/packages.json | jq '[ .packages[][] | select(.type == "heroku-sys-php") ][0] | {replace}'

PHP extensions built as shared are not listed in replace, as they get dedicated package entries in the repository, with a dist type of heroku-sys-php-bundled-extension (see above).

Extra: Config

A package of type heroku-sys-php-extension may contain a config key inside the extra struct holding a string with a config filename. If this key is not given, an automatic config that only loads the extension .so is generated. Otherwise, the given config file is used; it is then also responsible for loading the extension .so itself.

This feature can be used if an extension should have default configuration in place. For instance, when building an extension named "foobar" that you want some default INI settings to use, write a file named $1/etc/php/conf.d/foobar.ini-dist in your formula, with the following contents:

extension=foobar.so
foobar.some_default = different

If extra.config in the manifest is then set to "etc/php/conf.d/memcached.ini-dist", this config file will be used.

Example: curl -s https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-20-stable/packages.json | jq '[ .packages[][] | select(.name == "heroku-sys/ext-newrelic") ][0] | {extra: {config: .extra.config}}'

Extra: Export & Profile

Any package may generate shell scripts that are evaluated during app build, and during dyno startup, respectively. This is most commonly used for ensuring that built binaries are available on $PATH (for both cases), and for e.g. launching a sidecar process such as a proxy or agent (for the dyno startup case).

For example, a PHP runtime will want to make its bin/ (for php) and sbin/ (for php-fpm) available on $PATH both during a build (so that something like composer install can work at all during a build, or so a subsequent buildpack can invoke PHP), as well as on dyno startup (so that the application may function).

To achieve this, the formula would write a bin/export.sh with the following contents (the /app user directory must explicitly be given here):

export PATH="/app/.heroku/php/bin:/app/.heroku/php/sbin:$PATH"

Example: curl -s https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-20-stable/packages.json | jq '[ .packages[][] | select(.type == "heroku-sys-webserver") ][0] | {extra: {export: .extra.export}}'

If the extra.export key in the manifest is then set to a string value of "bin/export.sh", the platform installer will ensure all packages have their export instructions executed after platform installation is complete.

In addition, a bin/profile.sh would also be necessary, with similar contents (but this time using $HOME instead of /app, for portability):

export PATH="$HOME/.heroku/php/bin:$HOME/.heroku/php/sbin:$PATH"

Example: curl -s https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-20-stable/packages.json | jq '[ .packages[][] | select(.type == "heroku-sys-webserver") ][0] | {extra: {profile: .extra.profile}}'

If the extra.profile key in the manifest is then set to a string value of "bin/profile.sh", the platform installer will ensure that this script is executed, together with scripts from any other packages, during the startup of a dyno.

For most packages, the export key is never needed; the profile key is sometimes used to perform operations during dyno boot. For example, the newrelic extension uses it to start the newrelic-daemon background process.

Example: curl -s https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-20-stable/packages.json | jq '[ .packages[][] | select(.name == "heroku-sys/ext-newrelic") ][0] | {extra: {profile: .extra.profile}}'

Extra: Shared

As package of type heroku-sys-php may come bundled with a bunch of extensions, it must list the all statically-built-in extensions in the replace section of its manifest; all extensions built as shared must instead be generated as separate packages (see further above). In order to allow external tooling to still quickly determine which packages belong to a PHP release, an entry for each shared extension should be generated in struct extra.shared, with package names as keys and false as the value.

Example: curl -s https://lang-php.s3.us-east-1.amazonaws.com/dist-heroku-20-stable/packages.json | jq '[ .packages[][] | select(.type == "heroku-sys-php" and .require["heroku/installer-plugin"] == "^1.6.0") ][0] | {extra: {shared: .extra.shared}}'

About Repositories

The repository is a packages.json of all manifests, which can be used by Composer as a packagist repository type. See Usage in Applications for instructions on how to use such a repository with an application.

The structure of a packagist type repository is a struct with a single key "packages", which is an array containing another array (!) which is a list of all the manifest structs:

{
	"packages": [
		[
			{
				"name": "heroku-sys/php"
				…
			},
			…
			{
				"name": "heroku-sys/ext-foobar"
				…
			}
		]
	]
}

Important: due to a peculiarity of Composer's dependency solver, extensions of identical version but for different PHP versions must be ordered within the repository in descending PHP version order, i.e. ext-foobar:1.2.3 for php:7.3.* must appear before ext-foobar:1.2.3 for php:7.2.*. Otherwise, deploys may select a lower PHP version than possible. The mkrepo.sh script takes care of this ordering.

Repositories and Stacks

In principle, a single repository can contain multiple, stack-specific versions of the same package. Consider the following condensed example for two identical versions of ext-pq, but for two PHP runtimes, on the heroku-18 stack:

{
    "name": "heroku-sys/ext-pq",
    "version": "2.1.5",
    "require": {
        "heroku-sys/heroku": "^18.0.0",
        "heroku-sys/php": "7.3.*"
    }
},
{
    "name": "heroku-sys/ext-pq",
    "version": "2.1.5",
    "require": {
        "heroku-sys/heroku": "^18.0.0",
        "heroku-sys/php": "7.2.*"
    }
}

There is no reason why there couldn't be two additional packages, but with a heroku-sys/heroku dependency of "^16.0.0", in the same repository, like so:

{
    "name": "heroku-sys/ext-pq",
    "version": "2.1.5",
    "require": {
        "heroku-sys/heroku": "^16.0.0",
        "heroku-sys/php": "7.3.*"
    }
},
{
    "name": "heroku-sys/ext-pq",
    "version": "2.1.5",
    "require": {
        "heroku-sys/heroku": "^16.0.0",
        "heroku-sys/php": "7.2.*"
    }
},
{
    "name": "heroku-sys/ext-pq",
    "version": "2.1.5",
    "require": {
        "heroku-sys/heroku": "^18.0.0",
        "heroku-sys/php": "7.3.*"
    }
},
{
    "name": "heroku-sys/ext-pq",
    "version": "2.1.5",
    "require": {
        "heroku-sys/heroku": "^18.0.0",
        "heroku-sys/php": "7.2.*"
    }
}

Composer would be able to resolve the right variant of the ext-pq/2.1.5 package when it's requested as a dependency, just like how it does for the heroku-sys/php dependency.

Heroku's own platform repositories are kept separately per stack. This is mostly in the interest of keeping the list of available packages small, both for resolution at installation time, and for the purpose of faster synchronization (see further below).

Maintainers of custom repositories with a smaller number of packages may find it advantageous to keep all stacks together. The advantage of this is that developers using such a repository do not have to update the repository URL after changing the stack on an application.

In some cases, a package may be able to run on several stacks. This is usually the case when the underlying library ABIs are very stable and do not change across Heroku stack versions, or when a package is built statically with libraries included, or when other measures have been taken to ensure a library can use multiple versions of a library.

For example, the newrelic extension formula only downloads a pre-built binary extension .so and packages it for use on Heroku. It works on all modern Linux versions, so it could theoretically be supplied in a single version for all stacks.

This could either be done by omitting the stack requirement entirely:

{
    "name": "heroku-sys/ext-newrelic",
    "version": "8.6.0.238",
    "require": {
        "heroku-sys/php": "7.3.*"
    }
}

Or by targeting several possible values for heroku-sys/heroku:

{
    "name": "heroku-sys/ext-newrelic",
    "version": "8.6.0.238",
    "require": {
        "heroku-sys/heroku": "^16.0.0 | ^18.0.0",
        "heroku-sys/php": "7.3.*"
    }
}

However, as many of Heroku's other packages are stack-specific in their library usage, separate repositories have to be kept anyway, so the newrelic extension is treated the same way as all other packages.

(Re-)generating Repositories

The normal flow is to run deploy.sh first to deploy one or more packages, and then to use mkrepo.sh to re-generate the repo:

~ $ mkrepo.sh --upload

This will generate packages.json and upload it right away, or, if the --upload is not given, print upload instructions for s3cmd.

Alternatively, deploy.sh can be called with --publish as the first argument, in which case mkrepo.sh --upload will be called after the package deploy and manifest upload was successful:

~ $ deploy.sh --publish php-6.0.0

This should be used with caution, as several parallel deploy.sh invocations could result in a race condition when re-generating the repository.

Syncing Repositories

It is often desirable to have a bucket with two repositories under different prefixes, e.g. dist-heroku-20-develop/ and dist-heroku-20-stable/, with the latter usually used by apps for deploys. The "develop" bucket prefix would be set via S3_PREFIX on the Heroku package builder app or Docker container, so all builds would always end up there.

After testing builds, the contents of that "develop" repository can then be synced to "stable" using sync.sh:

~ $ sync.sh my-bucket dist-heroku-20-stable/ my-bucket dist-heroku-20-develop/

The sync.sh script takes destination bucket info as arguments first, then source bucket info.

The sync.sh script automatically detects additions, updates and removals based on manifests. It will also warn if the source packages.json is not up to date with its manifests, and prompt for confirmation before syncing.

Syncing from Upstream

You will usually use an Upstream Bucket to ensure that Bob will pull dependencies from Heroku's official bucket without having to worry about maintaining packages up the dependency tree, such as library or PHP prerequsites for an extension.

However, in rare circumstances, such as when you want to fully host all platform packages including PHP yourself and have the official repository disabled for your app, you either need to build all packages from scratch, or sync the Heroku builds from the official repository:

~ $ sync.sh $S3_BUCKET $S3_PREFIX $UPSTREAM_S3_BUCKET $UPSTREAM_S3_PREFIX

Removing Packages

The remove.sh helper removes a package manifest and its tarball from a bucket, and re-generates the repository. It accepts one or more names of a JSON manifest file from the bucket (optionally without ".composer.json" suffix) as arguments:

~ $ remove.sh ext-imagick-3.4.4_php-7.3.composer.json ext-imagick-3.4.4_php-7.4.composer.json

Unless the --no-publish option is given, the repository will be re-generated immediately after removal. Otherwise, the manifests and tarballs would be removed, but the main repository would remain in place, pointing to non-existing packages, so usage of this flag is only recommended for debugging purposes or similar.

Examples

Building a Different Nginx Version Using A Buildpack Fork

Approach

In this example, you will fork the buildpack and add your own formula to it. The fork is only used for building the package and publishing the repository, it is not used to build and run applications.

The heroku-18, heroku-20, and heroku-22 stack variants of the package will be hosted in the same repository.

A development and a stable S3 bucket prefix are used for the repository, and helpers are used for synchronization between them.

The package in this example is a mainline release of Nginx, whose formula simply re-uses the existing Nginx base formula.

Prerequisites

Preparations

First, create, in a secure location on your file system, a heroku-php-s3.dockerenv file with the following contents:

AWS_ACCESS_KEY_ID=<yourkeyid>
AWS_SECRET_ACCESS_KEY=<yourkey>
S3_BUCKET=<yourbucketname>
S3_PREFIX=dist-develop/ # overriding the Dockerfile default here, which contains the stack
S3_REGION=… # bucket region, e.g. "s3.eu-west-1"

Have your Git fork ready:

$ git clone <yourforkof/heroku-buildpack-php>
$ cd heroku-buildpack-php

Formula Creation

Next, make and commit your change; it's enough to simply copy the existing stable nginx formula stub (take a look inside it to understand why):

$ cp support/build/nginx-{1.14.2,1.15.4} # or whatever versions are applicable
$ git add support/build/
$ git commit -m "new nginx version"

The versions in the example above may have to be updated to reflect newer releases.

Finally, build the containers for each stack:

$ docker build --pull --tag heroku-php-build-heroku-22 --file $(pwd)/support/build/_docker/heroku-22.Dockerfile .
$ docker build --pull --tag heroku-php-build-heroku-20 --file $(pwd)/support/build/_docker/heroku-20.Dockerfile .
$ docker build --pull --tag heroku-php-build-heroku-18 --file $(pwd)/support/build/_docker/heroku-18.Dockerfile .

Building and Deploying

Verify that the build works:

$ docker run --rm -ti --env-file=../heroku-php-s3.dockerenv heroku-php-build-heroku-22 bob build nginx-1.15.4
$ docker run --rm -ti --env-file=../heroku-php-s3.dockerenv heroku-php-build-heroku-20 bob build nginx-1.15.4
$ docker run --rm -ti --env-file=../heroku-php-s3.dockerenv heroku-php-build-heroku-18 bob build nginx-1.15.4

If all went well, deploy it using the helper script:

$ docker run --rm -ti --env-file=../heroku-php-s3.dockerenv heroku-php-build-heroku-22 deploy.sh nginx-1.15.4
$ docker run --rm -ti --env-file=../heroku-php-s3.dockerenv heroku-php-build-heroku-20 deploy.sh nginx-1.15.4
$ docker run --rm -ti --env-file=../heroku-php-s3.dockerenv heroku-php-build-heroku-18 deploy.sh nginx-1.15.4

Repository Creation

From the manifests that are now in your S3 bucket, make a repository (using any Docker image, as all packages for the different stacks share the same repository):

$ docker run --rm -ti --env-file=../heroku-php-s3.dockerenv heroku-php-build-heroku-20 mkrepo.sh --upload

You can now test this repository on a Heroku app:

$ heroku config:set HEROKU_PHP_PLATFORM_REPOSITORIES="https://<your-bucket-name>.s3.<your-bucket-region>.amazonaws.com/dist-develop/"
$ git commit --allow-empty -m "test new nginx"
$ git push heroku HEAD

Repository Synchronization

You deployed to the prefix dist-develop/ in your bucket; as that one is your test environment, you should also have a stable prefix, which you can synchronize to:

$ docker run --rm -ti --env-file=../heroku-php-s3.dockerenv heroku-php-build-heroku-20 sync.sh <yourbucketname> dist-stable/

You can then use that repository:

$ heroku config:set HEROKU_PHP_PLATFORM_REPOSITORIES="https://<your-bucket-name>.s3.<your-bucket-region>.amazonaws.com/dist-stable/"

Building a New Extension Using Heroku Tooling and Composer

Approach

The Heroku PHP buildpack will be pulled in as a Composer dependency. Its build Dockerfiles are built and tagged locally, and a custom Dockerfile for each targeted stack builds upon those tagged images.

The heroku-18, heroku-20, and heroku-22 stack variants of the package will be hosted in the same repository.

The package in this example is the Xdebug extension. The extension formula can re-use an existing buildpack base formula for PECL extensions.

Preparations

First, create, in a secure location on your file system, a heroku-php-s3.dockerenv file with the following contents:

AWS_ACCESS_KEY_ID=<yourkeyid>
AWS_SECRET_ACCESS_KEY=<yourkey>
S3_BUCKET=<yourbucketname>
S3_PREFIX=dist-stable/ # overriding the Dockerfile default here, which contains the stack
S3_REGION=… # bucket region, e.g. "s3.us-east-1"

Pull in the buildpack as a Composer dependency:

$ composer require heroku/heroku-buildpack-php:*

Build the base Docker images from the buildpack for all stacks:

$ cd vendor/heroku/heroku-buildpack-php
$ docker build --pull --tag php-heroku-22 --file $(pwd)/support/build/_docker/heroku-22.Dockerfile .
$ docker build --pull --tag php-heroku-20 --file $(pwd)/support/build/_docker/heroku-20.Dockerfile .
$ docker build --pull --tag php-heroku-18 --file $(pwd)/support/build/_docker/heroku-18.Dockerfile .
$ cd -

Creating Custom Dockerfiles

Create a heroku-22.Dockerfile with the following contents:

FROM php-heroku-22:latest
ENV WORKSPACE_DIR=/app
ENV UPSTREAM_S3_BUCKET=lang-php
ENV UPSTREAM_S3_PREFIX=dist-heroku-22-stable/
COPY . /app

Create a heroku-20.Dockerfile with the following contents:

FROM php-heroku-20:latest
ENV WORKSPACE_DIR=/app
ENV UPSTREAM_S3_BUCKET=lang-php
ENV UPSTREAM_S3_PREFIX=dist-heroku-20-stable/
COPY . /app

Create a heroku-18.Dockerfile with the following contents:

FROM php-heroku-18:latest
ENV WORKSPACE_DIR=/app
ENV UPSTREAM_S3_BUCKET=lang-php
ENV UPSTREAM_S3_PREFIX=dist-heroku-18-stable/
COPY . /app

Both set the correct upstream S3 bucket and prefix, so that formula dependencies like PHP are pulled from the official Heroku S3 locations.

Create an Extension Base Formula

In the project root directory, create a file named xdebug with the following contents:

#!/usr/bin/env bash

dep_name=$(basename $BASH_SOURCE)
source $(dirname $BASH_SOURCE)/vendor/heroku/heroku-buildpack-php/support/build/extensions/pecl

Create Extension Formulae per Version and PHP Series

For each PHP version, create a separate directory, and in there, create a formula for the specific version.

For instance, for PHP 7.3 and Xdebug version 2.7.0, have a php-7.3/xdebug-2.7.0 with the following contents:

#!/usr/bin/env bash
# Build Path: /app/.heroku/php
# Build Deps: php-7.3.*

source $(dirname $0)/../xdebug

The php-7.3.* dependency will not be found in the current S3 bucket and prefix, so Bob will fall back to UPSTREAM_S3_BUCKET and UPSTREAM_S3_PREFIX.

Build Dockerfiles

Build one Docker image for each stack:

$ docker build --tag xdebug-heroku-22 --file heroku-22.Dockerfile .
$ docker build --tag xdebug-heroku-20 --file heroku-20.Dockerfile .
$ docker build --tag xdebug-heroku-18 --file heroku-18.Dockerfile .

Building and Deploying

Verify that the build works by building a specific formula for a specific PHP version:

$ docker run --rm -ti --env-file=../heroku-php-s3.dockerenv xdebug-heroku-22 bob build php-7.3/xdebug-2.7.0
$ docker run --rm -ti --env-file=../heroku-php-s3.dockerenv xdebug-heroku-20 bob build php-7.3/xdebug-2.7.0
$ docker run --rm -ti --env-file=../heroku-php-s3.dockerenv xdebug-heroku-18 bob build php-7.3/xdebug-2.7.0

If all went well, deploy it using the helper script:

$ docker run --rm -ti --env-file=../heroku-php-s3.dockerenv xdebug-heroku-22 deploy.sh php-7.3/xdebug-2.7.0
$ docker run --rm -ti --env-file=../heroku-php-s3.dockerenv xdebug-heroku-20 deploy.sh php-7.3/xdebug-2.7.0
$ docker run --rm -ti --env-file=../heroku-php-s3.dockerenv xdebug-heroku-18 deploy.sh php-7.3/xdebug-2.7.0

Repository Creation

From the manifests that are now in your S3 bucket, make a repository:

$ docker run --rm -ti --env-file=../heroku-php-s3.dockerenv xdebug-heroku-20 mkrepo.sh --upload

You can now test this repository on a Heroku app by pushing an app that requires ext-xdebug in composer.json:

$ heroku config:set HEROKU_PHP_PLATFORM_REPOSITORIES="https://<your-bucket-name>.s3.<your-bucket-region>.amazonaws.com/dist-stable/"
$ composer require "ext-xdebug:*"
$ git add composer.{json,lock}
$ git commit -m "require xdebug"
$ git push heroku HEAD

Hosting a Proprietary Extension Using Custom Tooling

Let's say you already have your proprietary extension, "myext", built as .so files for each PHP runtime series. All you would like to do is make them available for installation. Let's say your extension is currently at version 1.2.3, and you would like to host the repository for Heroku at https://download.example.com/heroku/. For this example, we will package a PHP 7.3 version only.

If your extension filename is myext-1.2.3_php-7.3_linux-x64.so, make a tarball with the .so file renamed to only myext.so, in a directory named lib/php/extensions/no-debug-non-zts-20180731 (20180731 is the PHP extension API version for PHP 7.3), so the tarball only contains a single file:

lib/php/extensions/no-debug-non-zts-20180731/myext.so

Name this tarball ext-myext-1.2.3_php-7.3.tar.gz and make it available at https://download.example.com/heroku/ext-myext-1.2.3_php-7.3.tar.gz

Assuming that the extension has no stack-specific requirements (meaning it can run on any stack), you can then have a repository at https://download.example.com/heroku/packages.json with the following contents:

{
	"packages": [
		[
			{
				"name": "heroku-sys/ext-myext",
				"version": "1.2.3",
				"type": "heroku-sys-php-extension",
				"require": {
					"heroku-sys/php": "7.3.*",
					"heroku/installer-plugin": "^1.2.0",
				},
				"dist": {
					"type": "heroku-sys-tar",
					"url": "https://download.example.com/heroku/ext-myext-1.2.3_php-7.3.tar.gz",
				},
				"time": "WHEN DID MCFLY COME BACK FROM THE FUTURE",
			}
		]
	]
}

Remember the warning above about version ordering: the PHP 7.3 variant of ext-myext version 1.2.3 must be listed before the PHP 7.2 variant, and so forth, to ensure Composer picks the highest possible PHP version.

The extension is then ready for use in applications by requiring it in composer.json and instructing the Heroku app to use your custom repository:

$ composer require ext-myext:*
$ git add composer.{json,lock}
$ git commit -m "use ext-myext"
$ heroku config:set HEROKU_PHP_PLATFORM_REPOSITORIES="https://download.example.com/heroku/"
$ git push heroku HEAD

Tips & Tricks

  • All manifests generated by Bob formulas, by mkrepo.sh and by sync.sh use an S3 region from environment variable $S3_REGION and fall back to "s3", which is deprecated by AWS and may cause rate limit problems when resolving the bucket region from this global endpoint. Resulting URLs look like e.g. "https://<your-bucket-name>.s3.us-east-1.amazonaws.com/your-prefix/...".
  • If any dependencies are not yet deployed, you need to deploy them first, or use UPSTREAM_S3_BUCKET and UPSTREAM_S3_PREFIX (recommended).