On 04-18-21 release, "No connection possible" on Chroma74 activation

[fearthis4]

When trying to test out the Chroma74 display activation on the latest build it keeps getting RX Timeouts with a "no connection possible" message:
2692061 : short SYNC done 2692061 : Mode changed to Idle 2692061 : Idle 2692663 : Mode changed to Wakeup Activation 2692663 : Wakeup Activation Len 10 Data: 0x00 0x4a 0x4d 0x10 0x17 0x66 0x78 0x01 0x00 0x01 2692674 : Radio set to base freq: (F=35) 915.00 Mhz 2692674 : Radio set id done 0 2693143 : Count: 109 2694243 : Count: 248 2695343 : Count: 248 2696443 : Count: 248 2697543 : Count: 250 2698643 : Count: 247 2699743 : Count: 247 2700843 : Count: 248 2701943 : Count: 248 2703043 : Count: 248 2704143 : Count: 248 2705243 : Count: 249 2706343 : Count: 248 2707443 : Count: 249 2708167 : Wakeup Activation done 2708167 : Mode changed to Activation 2708167 : Activation Len 16 Data: 0x00 0x4a 0x4d 0x10 0x17 0x66 0x78 0x80 0x03 0x01 0x00 0x7b 0x00 0x00 0x00 0x00 2708213 : RX Timeout retry Len 16 Data: 0x00 0x4a 0x4d 0x10 0x17 0x66 0x78 0x80 0x03 0x01 0x00 0x7b 0x00 0x00 0x00 0x00 2708259 : RX Timeout retry Len 16 Data: 0x00 0x4a 0x4d 0x10 0x17 0x66 0x78 0x80 0x03 0x01 0x00 0x7b 0x00 0x00 0x00 0x00 2708305 : RX Timeout retry Len 16 Data: 0x00 0x4a 0x4d 0x10 0x17 0x66 0x78 0x80 0x03 0x01 0x00 0x7b 0x00 0x00 0x00 0x00 2708351 : RX Timeout retry Len 16 Data: 0x00 0x4a 0x4d 0x10 0x17 0x66 0x78 0x80 0x03 0x01 0x00 0x7b 0x00 0x00 0x00 0x00 2708397 : RX Timeout retry Len 16 Data: 0x00 0x4a 0x4d 0x10 0x17 0x66 0x78 0x80 0x03 0x01 0x00 0x7b 0x00 0x00 0x00 0x00 2708443 : RX Timeout retry Len 16 Data: 0x00 0x4a 0x4d 0x10 0x17 0x66 0x78 0x80 0x03 0x01 0x00 0x7b 0x00 0x00 0x00 0x00 2708489 : RX Timeout retry Len 16 Data: 0x00 0x4a 0x4d 0x10 0x17 0x66 0x78 0x80 0x03 0x01 0x00 0x7b 0x00 0x00 0x00 0x00 2708535 : RX Timeout retry Len 16 Data: 0x00 0x4a 0x4d 0x10 0x17 0x66 0x78 0x80 0x03 0x01 0x00 0x7b 0x00 0x00 0x00 0x00 2708543 : Count: 173 2708581 : RX Timeout retry Len 16 Data: 0x00 0x4a 0x4d 0x10 0x17 0x66 0x78 0x80 0x03 0x01 0x00 0x7b 0x00 0x00 0x00 0x00 2708627 : RX Timeout retry Len 16 Data: 0x00 0x4a 0x4d 0x10 0x17 0x66 0x78 0x80 0x03 0x01 0x00 0x7b 0x00 0x00 0x00 0x00 2708674 : no connection possible, exit activation 2708674 : Mode changed to Idle

Tried with both US and EU channel.

Using the old offset that worked previously with earlier builds (15)
However when trying EPOP900 display it works the first time, although actually sending actual images and text to the EPOP display is also getting RX timeouts.

[atc1441]

Hey. It is more likely related to the displays.

There was no untested change lately maybe ypu can try new batterys or direct powering for test

[fearthis4]

Just went through and tested the batteries and everything seems fine, I will try to do some further testing and follow-up.