Failed Requirement during ManualFeedbackTuner or any Opmode created

[ftcaarya]

RR FTC Version

0.1.13

Observed Behavior

After all tuning has been done for drive encoders, I was running the ManualFeedbackTuner opmode that was given with no edits to the file. When I ran it though I get a error saying "Failed Requirement" And the team code line says a line, I delete that line and run again it shows a different line with the same error. All these lines are in a trajectory builder btw.

Tuning Files

No response

Robot Logs

No response

[ftcaarya]

@rbrott

[rbrott]

Can you please post the full stacktrace?

[ftcaarya]

[rbrott]

Can you attach a robot log?

[ftcaarya]

Can you attach a robot log?

What does that mean? Like the telemetry or the robots behavior or logcat?

[rbrott]

Go to http://192.168.43.1:8080/logs and download one of the files.

[ftcaarya]

2024_03_01__19_32_30_036__ManualFeedbackTuner.log

[ftcaarya]

Go to http://192.168.43.1:8080/logs and download one of the files.

@rbrott I linked it

[rbrott]

So your params are

MECANUM_PARAMS
  axialGain: 0.0
  axialVelGain: 0.0
  headingGain: 0.0
  headingVelGain: 0.0
  inPerTick: 0.02258823529411765
  kA: 0.0005
  kS: 1.466179965890956
  kV: 0.004050112092712909
  lateralGain: 0.0
  lateralInPerTick: 0.0
  lateralVelGain: 0.0
  logoFacingDirection: BACKWARD
  maxAngAccel: 3.141592653589793
  maxAngVel: 3.141592653589793
  maxProfileAccel: 50.0
  maxWheelVel: 50.0
  minProfileAccel: -30.0
  trackWidthTicks: 1330.9955862311713
  usbFacingDirection: UP

lateralInPerTick should not be 0.0. Follow the tuning instructions to calculate its value.

[ftcaarya]

So your params are

MECANUM_PARAMS
  axialGain: 0.0
  axialVelGain: 0.0
  headingGain: 0.0
  headingVelGain: 0.0
  inPerTick: 0.02258823529411765
  kA: 0.0005
  kS: 1.466179965890956
  kV: 0.004050112092712909
  lateralGain: 0.0
  lateralInPerTick: 0.0
  lateralVelGain: 0.0
  logoFacingDirection: BACKWARD
  maxAngAccel: 3.141592653589793
  maxAngVel: 3.141592653589793
  maxProfileAccel: 50.0
  maxWheelVel: 50.0
  minProfileAccel: -30.0
  trackWidthTicks: 1330.9955862311713
  usbFacingDirection: UP

lateralInPerTick should not be 0.0. Follow the tuning instructions to calculate its value.

I had the letralInPerTick set but I was doing integer division instead of double division it was set as 24/1025 where it should be 24.0/1025 sorry for the trouble and thanks

[EthanHu29]

@rbrott , Any tool we can make the log files readable for human being? Or we have to write one ourselvles? Any suggestion? Thanks!