Yi Lite sta.conf / synchronisation does not work

[studio360de]

Hi there! I'd like to synchronize several Yi Lite cameras.

I did update the firmware and then loaded the sta.conf file from github. I changed the SSID, pw and country code, as said in the description. I loaded it onto a micro SD, put it into the cam, started the cam, set the frequency to 2,4 and switched the Wifi on. But still the cam shows the "old" cam-intern network and the standard password. Seems like the cam just does not recognize any changes. Ideas?

I appreciate any help!!

Best wishes! Rodger

[Vinzclorth0]

+2 on this. There are several things going on.

1. The documentation isn't too clear if this only works on the 4k camera, or if it extends to the Lite as well.

2. Where are you placing the sta.conf? In the root of the SD card? Or are you supposed to put them in /sdk/bin/en-us?

[qdkid]

my camera shows the same "old" intern wifi hotspot information. However if you check your router, it shows the camera connect to loca router with IP ok.