Enable Boot for SD card.md

Enable Boot for SD card

If you notice that the SOM board isn't booting the Linux window automatically, you will need to program it with the following instructions:

You will need Xilinx tools to accomplish this, and to have your board connected to Vivado.

Opening QSPI Programming

1. Open a XDSB or XSCT console
2. Use the following command in the console to enable JTAG bootmode source boot_mode/menu_tests.tcl
3. Then you can unlock the QSPI method usingt the command source program_qspi/spi_unlock.tcl

Programming QSPI

1. Open Vivado (2020.2 and later)
2. Open HW manager under the tasks section in the opening window
3. Select the following options:
   • Open target
   • Open new target
   • Next
   • Select Local Server
   • Next
   • Select xck26_0 within the Hardware devices
   • Finish
4. Right click on the xck26_0 target in the devices and select "Add Configuration Memory Device"
5. Search and select "mt25qu512-qspi-x4-single"
6. Then you will provide following files: XilinxSom_QspiImage_v1.0_202102251906.bin and zynqmsp_fsbl.elf files to program the board. (NOTE: programming will take about 10 minutes)

Return to workshop sessions

Return to Main Page

Go to Part 1

• Windows
• Linux
• Mac

Go to Part 2: Exploring the Different AAs

Go to Part 3: Running through AA1

Go to Part 4: Optional Demo

---

© Copyright 2021 Xilinx, Inc. All rights reserved.