diff --git a/bin/build_all.py b/bin/build_all.py index 3dc1d7f01c5f..50ce9be84868 100755 --- a/bin/build_all.py +++ b/bin/build_all.py @@ -26,6 +26,8 @@ 'keychron/k8/via', 'keychron/k8/optical', 'keychron/k8/optical_via', + 'keychron/k14/rgb', + 'keychron/k14/rgb/via', 'ajazz/ak33/rev1', 'ajazz/ak33/rev2', 'smartduck/xs61', diff --git a/keyboards/keychron/k14/rgb/chconf.h b/keyboards/keychron/k14/rgb/chconf.h new file mode 100644 index 000000000000..09edfcd884c9 --- /dev/null +++ b/keyboards/keychron/k14/rgb/chconf.h @@ -0,0 +1,700 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +# define CHCONF_H + +# define _CHIBIOS_RT_CONF_ +# define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +# if !defined(CH_CFG_ST_RESOLUTION) +# define CH_CFG_ST_RESOLUTION 32 +# endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +# if !defined(CH_CFG_ST_FREQUENCY) +# define CH_CFG_ST_FREQUENCY 10000 +# endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +# if !defined(CH_CFG_INTERVALS_SIZE) +# define CH_CFG_INTERVALS_SIZE 32 +# endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +# if !defined(CH_CFG_TIME_TYPES_SIZE) +# define CH_CFG_TIME_TYPES_SIZE 32 +# endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +# if !defined(CH_CFG_ST_TIMEDELTA) +# define CH_CFG_ST_TIMEDELTA 0 +# endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +# if !defined(CH_CFG_TIME_QUANTUM) +# define CH_CFG_TIME_QUANTUM 0 +# endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +# if !defined(CH_CFG_MEMCORE_SIZE) +# define CH_CFG_MEMCORE_SIZE 0 +# endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +# if !defined(CH_CFG_NO_IDLE_THREAD) +# define CH_CFG_NO_IDLE_THREAD FALSE +# endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_OPTIMIZE_SPEED) +# define CH_CFG_OPTIMIZE_SPEED FALSE +# endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_TM) +# define CH_CFG_USE_TM FALSE +# endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_REGISTRY) +# define CH_CFG_USE_REGISTRY TRUE +# endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_WAITEXIT) +# define CH_CFG_USE_WAITEXIT TRUE +# endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_SEMAPHORES) +# define CH_CFG_USE_SEMAPHORES TRUE +# endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +# if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +# define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +# endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_MUTEXES) +# define CH_CFG_USE_MUTEXES TRUE +# endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +# if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +# define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +# endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +# if !defined(CH_CFG_USE_CONDVARS) +# define CH_CFG_USE_CONDVARS TRUE +# endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +# if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +# define CH_CFG_USE_CONDVARS_TIMEOUT FALSE +# endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_EVENTS) +# define CH_CFG_USE_EVENTS TRUE +# endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +# if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +# define CH_CFG_USE_EVENTS_TIMEOUT TRUE +# endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_MESSAGES) +# define CH_CFG_USE_MESSAGES TRUE +# endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +# if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +# define CH_CFG_USE_MESSAGES_PRIORITY FALSE +# endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +# if !defined(CH_CFG_USE_MAILBOXES) +# define CH_CFG_USE_MAILBOXES TRUE +# endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_MEMCORE) +# define CH_CFG_USE_MEMCORE FALSE +# endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +# if !defined(CH_CFG_USE_HEAP) +# define CH_CFG_USE_HEAP FALSE +# endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_MEMPOOLS) +# define CH_CFG_USE_MEMPOOLS FALSE +# endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_OBJ_FIFOS) +# define CH_CFG_USE_OBJ_FIFOS FALSE +# endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_PIPES) +# define CH_CFG_USE_PIPES FALSE +# endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +# if !defined(CH_CFG_USE_DYNAMIC) +# define CH_CFG_USE_DYNAMIC FALSE +# endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +# if !defined(CH_CFG_USE_FACTORY) +# define CH_CFG_USE_FACTORY FALSE +# endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +# if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +# define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +# endif + +/** + * @brief Enables the registry of generic objects. + */ +# if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +# define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE +# endif + +/** + * @brief Enables factory for generic buffers. + */ +# if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +# define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE +# endif + +/** + * @brief Enables factory for semaphores. + */ +# if !defined(CH_CFG_FACTORY_SEMAPHORES) +# define CH_CFG_FACTORY_SEMAPHORES FALSE +# endif + +/** + * @brief Enables factory for mailboxes. + */ +# if !defined(CH_CFG_FACTORY_MAILBOXES) +# define CH_CFG_FACTORY_MAILBOXES FALSE +# endif + +/** + * @brief Enables factory for objects FIFOs. + */ +# if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +# define CH_CFG_FACTORY_OBJ_FIFOS FALSE +# endif + +/** + * @brief Enables factory for Pipes. + */ +# if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +# define CH_CFG_FACTORY_PIPES FALSE +# endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +# if !defined(CH_DBG_STATISTICS) +# define CH_DBG_STATISTICS FALSE +# endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +# if !defined(CH_DBG_SYSTEM_STATE_CHECK) +# define CH_DBG_SYSTEM_STATE_CHECK FALSE +# endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +# if !defined(CH_DBG_ENABLE_CHECKS) +# define CH_DBG_ENABLE_CHECKS FALSE +# endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +# if !defined(CH_DBG_ENABLE_ASSERTS) +# define CH_DBG_ENABLE_ASSERTS FALSE +# endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +# if !defined(CH_DBG_TRACE_MASK) +# define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +# endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +# if !defined(CH_DBG_TRACE_BUFFER_SIZE) +# define CH_DBG_TRACE_BUFFER_SIZE 128 +# endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +# if !defined(CH_DBG_ENABLE_STACK_CHECK) +# define CH_DBG_ENABLE_STACK_CHECK FALSE +# endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +# if !defined(CH_DBG_FILL_THREADS) +# define CH_DBG_FILL_THREADS FALSE +# endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +# if !defined(CH_DBG_THREADS_PROFILING) +# define CH_DBG_THREADS_PROFILING FALSE +# endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +# define CH_CFG_SYSTEM_EXTRA_FIELDS /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +# define CH_CFG_SYSTEM_INIT_HOOK() \ + { /* Add threads initialization code here.*/ } + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +# define CH_CFG_THREAD_EXTRA_FIELDS /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +# define CH_CFG_THREAD_INIT_HOOK(tp) \ + { /* Add threads initialization code here.*/ } + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +# define CH_CFG_THREAD_EXIT_HOOK(tp) \ + { /* Add threads finalization code here.*/ } + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +# define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) \ + { /* Context switch code here.*/ } + +/** + * @brief ISR enter hook. + */ +# define CH_CFG_IRQ_PROLOGUE_HOOK() \ + { /* IRQ prologue code here.*/ } + +/** + * @brief ISR exit hook. + */ +# define CH_CFG_IRQ_EPILOGUE_HOOK() \ + { /* IRQ epilogue code here.*/ } + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +# define CH_CFG_IDLE_ENTER_HOOK() \ + { /* Idle-enter code here.*/ } + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +# define CH_CFG_IDLE_LEAVE_HOOK() \ + { /* Idle-leave code here.*/ } + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +# define CH_CFG_IDLE_LOOP_HOOK() \ + { /* Idle loop code here.*/ } + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +# define CH_CFG_SYSTEM_TICK_HOOK() \ + { /* System tick event code here.*/ } + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +# define CH_CFG_SYSTEM_HALT_HOOK(reason) \ + { /* System halt code here.*/ } + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +# define CH_CFG_TRACE_HOOK(tep) \ + { /* Trace code here.*/ } + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/keychron/k14/rgb/halconf.h b/keyboards/keychron/k14/rgb/halconf.h new file mode 100644 index 000000000000..4c87f9843aa1 --- /dev/null +++ b/keyboards/keychron/k14/rgb/halconf.h @@ -0,0 +1,524 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +# define HALCONF_H + +# define _CHIBIOS_HAL_CONF_ +# define _CHIBIOS_HAL_CONF_VER_7_0_ + +# include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +# if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +# define HAL_USE_PAL TRUE +# endif + +/** + * @brief Enables the ADC subsystem. + */ +# if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +# define HAL_USE_ADC FALSE +# endif + +/** + * @brief Enables the CAN subsystem. + */ +# if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +# define HAL_USE_CAN FALSE +# endif + +/** + * @brief Enables the cryptographic subsystem. + */ +# if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +# define HAL_USE_CRY FALSE +# endif + +/** + * @brief Enables the DAC subsystem. + */ +# if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +# define HAL_USE_DAC FALSE +# endif + +/** + * @brief Enables the GPT subsystem. + */ +# if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +# define HAL_USE_GPT FALSE +# endif + +/** + * @brief Enables the I2C subsystem. + */ +# if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +# define HAL_USE_I2C FALSE +# endif + +/** + * @brief Enables the I2S subsystem. + */ +# if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +# define HAL_USE_I2S FALSE +# endif + +/** + * @brief Enables the ICU subsystem. + */ +# if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +# define HAL_USE_ICU FALSE +# endif + +/** + * @brief Enables the MAC subsystem. + */ +# if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +# define HAL_USE_MAC FALSE +# endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +# if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +# define HAL_USE_MMC_SPI FALSE +# endif + +/** + * @brief Enables the PWM subsystem. + */ +# if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +# define HAL_USE_PWM TRUE +# endif + +/** + * @brief Enables the RTC subsystem. + */ +# if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +# define HAL_USE_RTC FALSE +# endif + +/** + * @brief Enables the SDC subsystem. + */ +# if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +# define HAL_USE_SDC FALSE +# endif + +/** + * @brief Enables the SERIAL subsystem. + */ +# if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +# define HAL_USE_SERIAL FALSE +# endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +# if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +# define HAL_USE_SERIAL_USB TRUE +# endif + +/** + * @brief Enables the SIO subsystem. + */ +# if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +# define HAL_USE_SIO FALSE +# endif + +/** + * @brief Enables the SPI subsystem. + */ +# if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +# define HAL_USE_SPI FALSE +# endif + +/** + * @brief Enables the TRNG subsystem. + */ +# if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +# define HAL_USE_TRNG FALSE +# endif + +/** + * @brief Enables the UART subsystem. + */ +# if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +# define HAL_USE_UART FALSE +# endif + +/** + * @brief Enables the USB subsystem. + */ +# if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +# define HAL_USE_USB TRUE +# endif + +/** + * @brief Enables the WDG subsystem. + */ +# if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +# define HAL_USE_WDG FALSE +# endif + +/** + * @brief Enables the WSPI subsystem. + */ +# if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +# define HAL_USE_WSPI FALSE +# endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +# define PAL_USE_CALLBACKS FALSE +# endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +# define PAL_USE_WAIT FALSE +# endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +# define ADC_USE_WAIT TRUE +# endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define ADC_USE_MUTUAL_EXCLUSION TRUE +# endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +# if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +# define CAN_USE_SLEEP_MODE TRUE +# endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +# if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +# define CAN_ENFORCE_USE_CALLBACKS FALSE +# endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +# if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +# define HAL_CRY_USE_FALLBACK FALSE +# endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +# if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +# define HAL_CRY_ENFORCE_FALLBACK FALSE +# endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +# define DAC_USE_WAIT TRUE +# endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define DAC_USE_MUTUAL_EXCLUSION TRUE +# endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +# if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define I2C_USE_MUTUAL_EXCLUSION TRUE +# endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +# if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +# define MAC_USE_ZERO_COPY FALSE +# endif + +/** + * @brief Enables an event sources for incoming packets. + */ +# if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +# define MAC_USE_EVENTS TRUE +# endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +# if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +# define MMC_NICE_WAITING TRUE +# endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +# if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +# define SDC_INIT_RETRY 100 +# endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +# if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +# define SDC_MMC_SUPPORT FALSE +# endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +# if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +# define SDC_NICE_WAITING TRUE +# endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +# if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +# define SDC_INIT_OCR_V20 0x50FF8000U +# endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +# if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +# define SDC_INIT_OCR 0x80100000U +# endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +# if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +# define SERIAL_DEFAULT_BITRATE 38400 +# endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +# if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +# define SERIAL_BUFFERS_SIZE 16 +# endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +# if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +# define SERIAL_USB_BUFFERS_SIZE 1 +# endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +# if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +# define SERIAL_USB_BUFFERS_NUMBER 2 +# endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +# define SPI_USE_WAIT TRUE +# endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +# define SPI_USE_CIRCULAR FALSE +# endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define SPI_USE_MUTUAL_EXCLUSION TRUE +# endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +# if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +# endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +# define UART_USE_WAIT FALSE +# endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define UART_USE_MUTUAL_EXCLUSION FALSE +# endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +# define USB_USE_WAIT TRUE +# endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +# define WSPI_USE_WAIT TRUE +# endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define WSPI_USE_MUTUAL_EXCLUSION TRUE +# endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/keychron/k14/rgb/info.json b/keyboards/keychron/k14/rgb/info.json new file mode 100644 index 000000000000..11676ee1f193 --- /dev/null +++ b/keyboards/keychron/k14/rgb/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "K14 Gateron RGB", + "url": "https://www.keychron.com/products/keychron-k14-wireless-mechanical-keyboard", + "maintainer": "Jpe230", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [{"label":"ESC", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Ins", "x":15, "y":0}, {"label":"RGB", "x":16, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"End", "x":15, "y":1}, {"label":"Del", "x":16, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Home", "x":15, "y":2}, {"label":"PgUp", "x":16, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"\u2191", "x":15, "y":3}, {"label":"PgDn", "x":16, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Ctrl", "x":11, "y":4}, {"label":"Fn1", "x":12, "y":4}, {"label":"Fn2", "x":13, "y":4}, {"label":"\u2190", "x":14, "y":4}, {"label":"\u2193", "x":15, "y":4}, {"label":"\u2192", "x":16, "y":4}] + } + } +} \ No newline at end of file diff --git a/keyboards/keychron/k14/rgb/k14.h b/keyboards/keychron/k14/rgb/k14.h new file mode 100644 index 000000000000..f2989d495a1a --- /dev/null +++ b/keyboards/keychron/k14/rgb/k14.h @@ -0,0 +1,20 @@ +#pragma once + +#include "quantum.h" +// readability +#define XXX KC_NO + +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, k2f, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3e, k3f, \ + k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e, k4f \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, k2e, k2f}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d, k3e, k3f}, \ + {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, k4a, k4b, k4c, k4d, k4e, k4f} \ +} diff --git a/keyboards/keychron/k14/rgb/keymaps/ansi/config.h b/keyboards/keychron/k14/rgb/keymaps/ansi/config.h new file mode 100644 index 000000000000..fdd0002a77a9 --- /dev/null +++ b/keyboards/keychron/k14/rgb/keymaps/ansi/config.h @@ -0,0 +1,50 @@ +/* Copyright 2020 Adam Honse + * Copyright 2020 Dimitris Mantzouranis + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x3434 +#define PRODUCT_ID 0xFE1A +#define DEVICE_VER 0x0001 + +#define MANUFACTURER Keychron +#define PRODUCT K14 +#define DESCRIPTION K14 Gateron RGB + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +#define DIODE_DIRECTION COL2ROW + +#define MATRIX_COL_PINS { A8, A9, A10, A11, A12, A13, A14, A15, B0, B1, B2, B3, B4, B5, B6, B7 } +#define MATRIX_ROW_PINS { D11, D10, D9, D8, D7 } + +// Connects each switch in the dip switch to the GPIO pin of the MCU +#define DIP_SWITCH_PINS { D4, D5 } + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 0 + +/* LED Status indicators */ +#define LED_CAPS_LOCK_PIN B9 +#define LED_PIN_ON_STATE 1 + +#include "config_led.h" diff --git a/keyboards/keychron/k14/rgb/keymaps/ansi/config_led.c b/keyboards/keychron/k14/rgb/keymaps/ansi/config_led.c new file mode 100644 index 000000000000..e18f6fa3bc09 --- /dev/null +++ b/keyboards/keychron/k14/rgb/keymaps/ansi/config_led.c @@ -0,0 +1,29 @@ +#ifdef RGB_MATRIX_ENABLE + +#include "rgb_matrix.h" +#include "config_led.h" + +// readability +#define NA NO_LED + +led_config_t g_led_config = { { + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 }, + { 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 }, + { 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, NA, 44, 45, 46 }, + { 47, NA, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, NA, 58, 59, 60 }, + { 61, 62, 63, NA, NA, NA, 64, NA, NA, 65, 66, 67, 68, 69, 70, 71 } +}, { + { 0.00, 0.00 }, { 14.93, 0.00 }, { 29.87, 0.00 }, { 44.80, 0.00 }, { 59.73, 0.00 }, { 74.67, 0.00 }, { 89.60, 0.00 }, { 104.53, 0.00 }, { 119.47, 0.00 }, { 134.40, 0.00 }, { 149.33, 0.00 }, { 164.27, 0.00 }, { 179.20, 0.00 }, { 194.13, 0.00 }, { 209.07, 0.00 }, { 224.00, 0.00 }, + { 0.00, 16.00 }, { 14.93, 16.00 }, { 29.87, 16.00 }, { 44.80, 16.00 }, { 59.73, 16.00 }, { 74.67, 16.00 }, { 89.60, 16.00 }, { 104.53, 16.00 }, { 119.47, 16.00 }, { 134.40, 16.00 }, { 149.33, 16.00 }, { 164.27, 16.00 }, { 179.20, 16.00 }, { 194.13, 16.00 }, { 209.07, 16.00 }, { 224.00, 16.00 }, + { 0.00, 32.00 }, { 14.93, 32.00 }, { 29.87, 32.00 }, { 44.80, 32.00 }, { 59.73, 32.00 }, { 74.67, 32.00 }, { 89.60, 32.00 }, { 104.53, 32.00 }, { 119.47, 32.00 }, { 134.40, 32.00 }, { 149.33, 32.00 }, { 164.27, 32.00 }, { 184.13, 32.00 }, { 209.07, 32.00 }, { 224.00, 32.00 }, + { 7.50, 48.00 }, { 29.87, 48.00 }, { 44.80, 48.00 }, { 59.73, 48.00 }, { 74.67, 48.00 }, { 89.60, 48.00 }, { 104.53, 48.00 }, { 119.47, 48.00 }, { 134.40, 48.00 }, { 149.33, 48.00 }, { 164.27, 48.00 }, { 179.20, 48.00 }, { 209.07, 48.00 }, { 224.00, 48.00 }, + { 0.00, 64.00 }, { 14.93, 64.00 }, { 29.87, 64.00 }, { 89.60, 64.00 }, { 134.40, 64.00 }, { 149.33, 64.00 }, { 164.27, 64.00 }, { 179.20, 64.00 }, { 194.13, 64.00 }, { 209.07, 64.00 }, { 224.00, 64.00 }, +}, { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, 4, + 1, 1, 1, 4, 1, 1, 1, 1, 4, 4, 4, +} }; + +#endif diff --git a/keyboards/keychron/k14/rgb/keymaps/ansi/config_led.h b/keyboards/keychron/k14/rgb/keymaps/ansi/config_led.h new file mode 100644 index 000000000000..b9053c62afbb --- /dev/null +++ b/keyboards/keychron/k14/rgb/keymaps/ansi/config_led.h @@ -0,0 +1,32 @@ +/* +Copyright 2020 Adam Honse +Copyright 2020 Dimitris Mantzouranis + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +// Backlight configuration +#define BACKLIGHT_LEVELS 8 + +#define LED_MATRIX_ROWS 5 +#define LED_MATRIX_ROW_CHANNELS 3 +#define LED_MATRIX_ROWS_HW (LED_MATRIX_ROWS * LED_MATRIX_ROW_CHANNELS) +#define LED_MATRIX_ROW_PINS { C6, C5, C4, C9, C8, C7, C12, C11, C10, B13, C14, C13, B14, B15, D3 } + +#define LED_MATRIX_COLS 16 +#define LED_MATRIX_COL_PINS MATRIX_COL_PINS + +#define DRIVER_LED_TOTAL (72) diff --git a/keyboards/keychron/k14/rgb/keymaps/ansi/keymap.c b/keyboards/keychron/k14/rgb/keymaps/ansi/keymap.c new file mode 100644 index 000000000000..f2e7a146399f --- /dev/null +++ b/keyboards/keychron/k14/rgb/keymaps/ansi/keymap.c @@ -0,0 +1,120 @@ +/* +Copyright 2020 Dimitris Mantzouranis + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_names { + _BASE = 0, + _FN1, + _FN2, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + +/* +--------------------------------------------------------------------------+----+----+ + | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BACKSP | INS| RGB| + +--------------------------------------------------------------------------+----+----+ + | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | END| DEL| + +--------------------------------------------------------------------------+----+----+ + | CAPSLCK | A | S | D | F | G | H | J | K | L | ; | ' | RETURN | HME|PDUP| + +--------------------------------------------------------------------------+----+----+ + | LSHIFT | Z | X | C | V | B | N | M | , | . | / | RSHIFT | UP |PDDN| + +--------------------------------------------------------------------------+----+----+ + |LCTRL| LGUI| LALT| SPACE |RALT|LCTL| FN1| FN2| DWN| RGT|LEFT| + +--------------------------------------------------------------------------+----+----+ +*/ + /* Row: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 */ + [_BASE] = { { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, RGB_MOD }, + { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, KC_DEL }, + { KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, KC_HOME, KC_PGUP }, + { KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, KC_UP, KC_PGDN }, + { KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_NO, KC_NO, KC_SPC, KC_NO, KC_NO, KC_RALT, KC_RCTL, MO(_FN1), MO(_FN2), KC_LEFT, KC_DOWN, KC_RGHT } + }, + +/* +--------------------------------------------------------------------------+----+----+ + | ` |SLCK|PAUS| APP| |BRLR|BRIN|MPRV| PLY|MNXT|MUTE|VLDN|VLUP| | SLP| TOG| + +--------------------------------------------------------------------------+----+----+ + | | | | | | | | | | | | | | | | HUE| + +--------------------------------------------------------------------------+----+----+ + | | | | | | | | | | | | | | | SPD| + +--------------------------------------------------------------------------+----+----+ + | | | | | | | | | | | | | | SAT| + +--------------------------------------------------------------------------+----+----+ + | | | | | | | FN1| FN2| | | | + +--------------------------------------------------------------------------+----+----+ +*/ + /* Row: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 */ + [_FN1] = { { KC_GRV, KC_SLCK, KC_PAUS, KC_APP, _______, RGB_VAD, RGB_VAI, KC_MPRV, KC_MPLY, KC_MNXT, KC__MUTE, KC__VOLDOWN, KC__VOLUP, _______, KC_SLEP, RGB_TOG }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUI }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_NO, _______, _______, RGB_SPI }, + { _______, KC_NO, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_NO, _______, _______, RGB_SAI }, + { _______, KC_LALT, KC_LGUI, KC_NO, KC_NO, KC_NO, _______, KC_NO, KC_NO, _______, _______, MO(_FN1), MO(_FN2), _______, _______, _______ } + }, + +/* +--------------------------------------------------------------------------+----+----+ + | |F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10| F11| F12| | | | + +--------------------------------------------------------------------------+----+----+ + | | | | | | | | | | | | | | | | | + +--------------------------------------------------------------------------+----+----+ + | | | | | | | | | | | | | | | | + +--------------------------------------------------------------------------+----+----+ + | | | | | | | | | | | | | | | + +--------------------------------------------------------------------------+----+----+ + | | | | | | | FN1| FN2| | | | + +--------------------------------------------------------------------------+----+----+ +*/ + + /* Row: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 */ + [_FN2] = { { RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_NO, _______, _______, _______ }, + { _______, KC_NO, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_NO, _______, _______, _______ }, + { _______, KC_LALT, KC_LGUI, KC_NO, KC_NO, KC_NO, _______, KC_NO, KC_NO, _______, _______, MO(_FN1), MO(_FN2), _______, _______, _______ } + } + +}; +void dip_switch_update_user(uint8_t index, bool active){ + switch(index){ + case 0: + if(active){ // Win/Android mode +// do stuff + } + else{ // Mac/iOS mode +// do stuff + } + break; + case 1: + if(active){ //BT mode +// do stuff + } + else{ //Cable mode +// do stuff + } + break; + } +} +void keyboard_post_init_user(void) { + // Customise these values to desired behaviour + debug_enable=true; + debug_matrix=true; + //debug_keyboard=true; + //debug_mouse=true; +} diff --git a/keyboards/keychron/k14/rgb/mcuconf.h b/keyboards/keychron/k14/rgb/mcuconf.h new file mode 100644 index 000000000000..e777b75c6c1e --- /dev/null +++ b/keyboards/keychron/k14/rgb/mcuconf.h @@ -0,0 +1,88 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * SN32F24x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define SN32F24x_MCUCONF + +/* + * HAL driver system settings. + */ +/* + * CT driver system settings. + */ +#define SN32_HAS_CT16B0 TRUE +#define SN32_HAS_CT16B1 TRUE +/* + * PWM driver system settings. + */ +#define SN32_PWM_USE_CT16B1 TRUE +#define SN32_PWM_USE_ONESHOT TRUE +/* + * SN driver system settings. + */ +#define SN32_HAS_GPIOA TRUE +#define SN32_HAS_GPIOB TRUE +#define SN32_HAS_GPIOC TRUE +#define SN32_HAS_GPIOD TRUE + +/* + * USB driver system settings. + */ +#define CRT1_AREAS_NUMBER 1 +#define PLATFORM_USB_USE_USB1 TRUE + +/* + * Timer driver system settings. + */ +#define SYS_CLOCK_SETUP 1 +#define SYS0_CLKCFG_VAL 0 +#define AHB_PRESCALAR 0 +#define CLKOUT_SEL_VAL 0x0 +#define CLKOUT_PRESCALAR 0x0 + +/*---------------------------------------------------------------------------- + DEFINES + *----------------------------------------------------------------------------*/ +#define IHRC48 0 +#define ILRC 1 + +/*---------------------------------------------------------------------------- + Define clocks + *----------------------------------------------------------------------------*/ +//#define __IHRC48_FREQ (48000000UL) +//#define __ILRC_FREQ (32000UL) + +// #endif /* _MCUCONF_H_ */ + +#define PLATFORM_MCUCONF + +#endif /* MCUCONF_H */ diff --git a/keyboards/keychron/k14/rgb/readme.md b/keyboards/keychron/k14/rgb/readme.md new file mode 100644 index 000000000000..d065fcac0477 --- /dev/null +++ b/keyboards/keychron/k14/rgb/readme.md @@ -0,0 +1,13 @@ +# Keychron K14 RGB + +K14 Gateron RGB + +Keyboard Maintainer: [Jpe230](https://github.com/Jpe230) +Based on Redragon K566 by: [Adam Honse](https://github.com/CalcProgrammer1) and Kemove DK63 by: [Stephen Peery](https://github.com/smp4488) +Hardware Supported: SN32F248BF + +Make example for this keyboard (after setting up your build environment): + + make keychron/k14/rgb:ansi + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/keychron/k14/rgb/rgb.h b/keyboards/keychron/k14/rgb/rgb.h new file mode 100644 index 000000000000..ef5b3f3e04d7 --- /dev/null +++ b/keyboards/keychron/k14/rgb/rgb.h @@ -0,0 +1,3 @@ +#pragma once + +#include "quantum.h" diff --git a/keyboards/keychron/k14/rgb/rules.mk b/keyboards/keychron/k14/rgb/rules.mk new file mode 100644 index 000000000000..b769d82b4a7c --- /dev/null +++ b/keyboards/keychron/k14/rgb/rules.mk @@ -0,0 +1,62 @@ +# project specific files +SRC = ../../../drivers/sn32/matrix_sn32f24xx.c +SRC += config_led.c + +## chip/board settings +# - the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = SN32 +MCU_SERIES = SN32F240B + +# Linker script to use +# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +MCU_LDSCRIPT = SN32F240B + +# Startup code to use +# - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = sn32f24xb + +# Board: it should exist either in /os/hal/boards/ +# or /boards +BOARD = SN_SN32F240B + +# Cortex version +MCU = cortex-m0 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 6 + +# BOOTLOADER = flash +SN32_BOOTLOADER_ADDRESS = 0x1FFF0301 + +OPT_DEFS = -O2 + +# Options to pass to dfu-util when flashing +# DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave +# DFU_SUFFIX_ARGS = -p DF11 -v 0483 + +# Build Options +# comment out to disable the options. +# +LTO_ENABLE = no +BACKLIGHT_ENABLE = no +MAGIC_ENABLE = yes +MAGIC_KEYCODE_ENABLE = yes +BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = no # USB Nkey Rollover +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = no +SERIAL_LINK_ENABLE = no +WAIT_FOR_USB = no +CUSTOM_MATRIX = yes +DIP_SWITCH_ENABLE = yes + +# Custom RGB matrix handling +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = SN32F248B diff --git a/keyboards/keychron/k14/rgb/via/readme.md b/keyboards/keychron/k14/rgb/via/readme.md new file mode 100644 index 000000000000..a27a3e1ebc13 --- /dev/null +++ b/keyboards/keychron/k14/rgb/via/readme.md @@ -0,0 +1,13 @@ +# Keychron K14 RGB + +K14 Gateron RGB + +Keyboard Maintainer: [Jpe230](https://github.com/Jpe230) +Based on Redragon K566 by: [Adam Honse](https://github.com/CalcProgrammer1) and Kemove DK63 by: [Stephen Peery](https://github.com/smp4488) +Hardware Supported: SN32F248BF + +Make example for this keyboard (after setting up your build environment): + + make keychron/k14/rgb/via + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/keychron/k14/rgb/via/rules.mk b/keyboards/keychron/k14/rgb/via/rules.mk new file mode 100644 index 000000000000..1e5b99807cb7 --- /dev/null +++ b/keyboards/keychron/k14/rgb/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/keychron/k14/rgb/via_ansi.json b/keyboards/keychron/k14/rgb/via_ansi.json new file mode 100644 index 000000000000..78b8e9275ab2 --- /dev/null +++ b/keyboards/keychron/k14/rgb/via_ansi.json @@ -0,0 +1,16 @@ +{ + "name": "K14 RGB", + "vendorId": "0x3434", + "productId": "0xFE1A", + "lighting": "none", + "matrix": {"rows": 5, "cols": 16}, + "layouts": { + "keymap": [ + ["0,0","0,1","0,2","0,3","0,4","0,5","0,6","0,7","0,8","0,9","0,10","0,11","0,12",{"w":2},"0,13","0,14","0,15"], + [{"w":1.5},"1,0","1,1","1,2","1,3","1,4","1,5","1,6","1,7","1,8","1,9","1,10","1,11","1,12",{"w":1.5},"1,13","1,14","1,15"], + [{"w":1.75},"2,0","2,1","2,2","2,3","2,4","2,5","2,6","2,7","2,8","2,9","2,10","2,11",{"w":2.25},"2,13","2,14","2,15"], + [{"w":2.25},"3,0","3,2","3,3","3,4","3,5","3,6","3,7","3,8","3,9","3,10", "3,11",{"w":2.75},"3,13","3,14","3,15"], + [{"w":1.25},"4,0",{"w":1.25},"4,1",{"w":1.25},"4,2",{"w":6.25},"4,6", "4,9","4,10","4,11","4,12","4,13","4,14","4,15"] + ] + } +}