Master: LET SGOFLET and SWOFLET Issue.

[OPMUSER]

There appears to be an inconsistency with the generation of relative permeability curves using the aforementioned keywords.

If I use pyscl and the pyscal example to generate the relative permeability curves, and then use the same example data set with the SGOFLET and SWOFLET keywords, I get different relative permeability when they should be the same.

For SATNUM 1, the pyscal oil-water relative permeability looks like this:

If I run OPM Flow, load the results into OPM ResInsight, and display the SATNUM 1 oil-water relative permeability curves, I get this:

Notice how the oil permeability set to one below SWL/SWCR, and more importantly that KRW is not extrapolated to one.

The gas-oil relative permeability curves, have similar problems. Here pyscal gives:

and SGOFLET gives:

I have attached both my test simulation deck and the pyscal example, for reference.

LET-01.zip
pyscal.zip