We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
first time I ran into this issue: any ideas on causes?
BladeRF microxA4 on Ubuntu 23.04 gnuradio 3.10.5.1 bladeRF-cli version: 1.9.0-git-368f0ac9 libbladeRF version: 2.5.0-git-368f0ac9 Firmware version: 2.4.0-git-a3d5c55f FPGA version: 0.15.0 (configured by USB host)
[ERROR @ host/libraries/libbladeRF/src/streaming/sync.c:349] wait_for_buffer: Timed out waiting for buf_ready after 3000 ms [bladeRF source] work: bladerf_sync_rx error: Operation timed out [bladeRF source] work: Consecutive error limit hit. Shutting down. [bladeRF source] stop: DEBUG: stopping source [ERROR @ host/libraries/libbladeRF/src/backend/usb/nios_access.c:68] Failed to send NIOS II request: No devices available [ERROR @ host/libraries/libbladeRF/src/board/bladerf2/rfic_host.c:251] _rfic_host_enable_module: dev->backend->rffe_control_read(dev, ®) failed: No devices available terminate reached from thread id: 7fc16d7fa6c0Got std::runtime_error stop: bladerf_enable_module failed: No devices available (-7) 0x7fc1e256883a: (gr::tagged_stream_block::check_topology(int, int)+0x17fa) 0x7fc1e22b6f2c: (std::rethrow_exception(std::__exception_ptr::exception_ptr)+0x7c) 0x7fc1e22b5ed9: (__cxa_free_dependent_exception+0x69) 0x7fc1e22b6649: (__gxx_personality_v0+0x99) 0x7fc1e281ca89: (_Unwind_GetTextRelBase+0x2969) 0x7fc1e281d57d: (_Unwind_Resume+0x12d) 0x7fc1e2b4a19d: -- error: unable to obtain symbol name for this frame 0x7fc1e252e1ca: (gr::block_executor::~block_executor()+0x32a) 0x7fc1e256c7e2: (gr::tagged_stream_block::general_work(int, std::vector<int, std::allocator<int> >&, std::vector<void const*, std::allocator<void const*> >&, std::vector<void*, std::allocator<void*> >&)+0xa12) 0x7fc1e256c864: (gr::tagged_stream_block::general_work(int, std::vector<int, std::allocator<int> >&, std::vector<void const*, std::allocator<void const*> >&, std::vector<void*, std::allocator<void*> >&)+0xa94) 0x7fc1e369c4ab: (boost::detail::make_ready_at_thread_exit(boost::shared_ptr<boost::detail::shared_state_base>)+0x30b) 0x7fc1e1e8f18a: (pthread_condattr_setpshared+0x50a) 0x7fc1e1f1dbd0: (__clone+0x120) Aborted
The text was updated successfully, but these errors were encountered:
This is also mentioned here: https://nuand.com/forums/viewtopic.php?p=17908&hilit=wait_for_buffer%3A+Timed+out+waiting+for+buf_ready+after#p17908
I have the same issue on 2.0 micro xA4. Switching to FPGA 0.12.0 did not help
Sorry, something went wrong.
No branches or pull requests
first time I ran into this issue: any ideas on causes?
BladeRF microxA4 on Ubuntu 23.04
gnuradio 3.10.5.1
bladeRF-cli version: 1.9.0-git-368f0ac9
libbladeRF version: 2.5.0-git-368f0ac9
Firmware version: 2.4.0-git-a3d5c55f
FPGA version: 0.15.0 (configured by USB host)
The text was updated successfully, but these errors were encountered: