E131ONLY_B1_CONFIGURE.ino

//requires ESPAsyncUDP: https://github.com/me-no-dev/ESPAsyncUDP
#include <ESP8266WiFi.h> //If you get an error here you need to install the ESP8266 board manager
#include <ESPAsyncE131.h> //https://github.com/forkineye/ESPAsyncE131
#include <my92xx.h> //https://github.com/xoseperez/my92xx
#include <ArduinoOTA.h> //ArduinoOTA is included in the ArduinoIDE now


#define MY92XX_MODEL    MY92XX_MODEL_MY9231     // The MY9291 is a 4-channel driver, usually for RGBW lights
#define MY92XX_CHIPS    2                       // No daisy-chain
#define MY92XX_DI_PIN   12                      // DI GPIO
#define MY92XX_DCKI_PIN 14                      // DCKI GPIO
#define UNIVERSE 1                              // First DMX Universe to listen for
#define UNIVERSE_COUNT 1                        // Total number of Universes to listen for, starting at UNIVERSE

my92xx _my92xx = my92xx(MY92XX_MODEL, MY92XX_CHIPS, MY92XX_DI_PIN, MY92XX_DCKI_PIN, MY92XX_COMMAND_DEFAULT);
ESPAsyncE131 e131(UNIVERSE_COUNT);
WiFiClient espClient;

//USER CONFIGURED SECTION START//
#define OTA_CLIENT_NAME    "B1_2" //This name will be used for arduinoOTA only
const char* ssid = "YourSSID";
const char* password = "YourWiFi_PW";
const char* mqtt_server = "192.168.X.XXX"; 
const int mqtt_port = 1883;
const char *mqtt_user = "YourMQTTUserName";
const char *mqtt_pass = "YourMQTTPassword";
//USER CONFIGURED SECTION END//

int r = 0;
int g = 0;
int b = 0;
int w = 0;
uint8_t r_show = 0;
uint8_t g_show = 0;
uint8_t b_show = 0;
uint8_t w_show = 0;
int brightness = 255;



void setup_wifi() 
{
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(ssid);
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) 
  {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
}

void setup() {
    Serial.begin(115200);
    delay(10);
    
    // Make sure you're in station mode    
    WiFi.mode(WIFI_STA);
    WiFi.setSleepMode(WIFI_NONE_SLEEP);
    setup_wifi();
    Serial.println("");
    Serial.print(F("Connecting to "));
    Serial.print(ssid);
    ArduinoOTA.setHostname(OTA_CLIENT_NAME);
    ArduinoOTA.begin(); 
    
    // Choose one to begin listening for E1.31 data
    if (e131.begin(E131_UNICAST))                               // Listen via Unicast
    //if (e131.begin(E131_MULTICAST, UNIVERSE, UNIVERSE_COUNT))   // Listen via Multicast
        Serial.println(F("Listening for data..."));
    else 
        Serial.println(F("*** e131.begin failed ***"));

}

void loop() 
{
  if (!e131.isEmpty()) 
  {
      e131_packet_t packet;
      e131.pull(&packet);     // Pull packet from ring buffer
      
      Serial.printf("Universe %u / %u Channels | Packet#: %u / Errors: %u / CH1: %u\n",
              htons(packet.universe),                 // The Universe for this packet
              htons(packet.property_value_count) - 1, // Start code is ignored, we're interested in dimmer data
              e131.stats.num_packets,                 // Packet counter
              e131.stats.packet_errors,               // Packet error counter
              packet.property_values[1]);             // Dimmer data for Channel 1
      r_show = packet.property_values[1];
      g_show = packet.property_values[2];
      b_show = packet.property_values[3];
  }

  _my92xx.setChannel(4, r_show); 
  _my92xx.setChannel(3, g_show); 
  _my92xx.setChannel(5, b_show); 
  _my92xx.setChannel(1, 0); 
  _my92xx.setChannel(2, 0); 
  _my92xx.setState(true);
  _my92xx.update();
  ArduinoOTA.handle();
}