thermo3

\mainpage Main Page

---

Thermo 3 click

Thermo 3 click carries TMP102, a digital temperature sensor IC with a tiny footprint of only 1.6mm x 1.6mm.

click Product page

---

Click library

• Author : MikroE Team
• Date : Feb 2020.
• Type : I2C type

Software Support

We provide a library for the Thermo3 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Thermo3 Click driver.

Standard key functions :

• Config Object Initialization function.

void thermo3_cfg_setup ( thermo3_cfg_t *cfg );

• Initialization function.

THERMO3_RETVAL thermo3_init ( thermo3_t *ctx, thermo3_cfg_t *cfg );

Example key functions :

• Gets temperature.

float get_temperature ( thermo3_t *ctx );

Examples Description

This application read the temperature.

The demo application is composed of two sections :

Application Init

Initialization driver enables - I2C.

void application_init ( void )
{
    log_cfg_t log_cfg;
    thermo3_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    thermo3_cfg_setup( &cfg );
    THERMO3_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    thermo3_init( &thermo3, &cfg );
}
  

Application Task

This is an example which demonstrates the use of Thermo 3 Click board. Detects the temperature and write on usb uart changes for every 3 sec.

void application_task ( void )
{
    float read_temp;

    read_temp = get_temperature( &thermo3 );

    log_printf( &logger, "Temperature: %.2f C\r\n", read_temp );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
}  

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Thermo3

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---