Skip to content

Latest commit

 

History

History
166 lines (122 loc) · 6.22 KB

details.md

File metadata and controls

166 lines (122 loc) · 6.22 KB
Raw

Multi Stepper TB62261 click

Multi Stepper Click is a compact add-on board that contains a bipolar stepper motor driver. This board features the TB62261FTG, a PHASE-in controlled bipolar stepping motor driver from Toshiba Semiconductor. It supports a PWM constant-current control drive and full-, half-, and quarter-step operation for less motor noise and smoother control. It has a wide operating voltage range of 10V to 38V with an output current capacity of 1.2A in addition to several built-in error detection circuits.

click Product page

Click library

  • Author : Stefan Filipovic
  • Date : Feb 2022.
  • Type : I2C type

Software Support

We provide a library for the Multi Stepper TB62261 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

This library contains API for Multi Stepper TB62261 Click driver.

Standard key functions :

  • multisteppertb62261_cfg_setup Config Object Initialization function.
void multisteppertb62261_cfg_setup ( multisteppertb62261_cfg_t *cfg );
  • multisteppertb62261_init Initialization function.
err_t multisteppertb62261_init ( multisteppertb62261_t *ctx, multisteppertb62261_cfg_t *cfg );
  • multisteppertb62261_default_cfg Click Default Configuration function.
err_t multisteppertb62261_default_cfg ( multisteppertb62261_t *ctx );

Example key functions :

  • multisteppertb62261_set_step_mode This function sets the step mode resolution settings in ctx->step_mode.
void multisteppertb62261_set_step_mode ( multisteppertb62261_t *ctx, uint8_t mode );
  • multisteppertb62261_drive_motor This function drives the motor for the specific number of steps at the selected speed.
err_t multisteppertb62261_drive_motor ( multisteppertb62261_t *ctx, uint32_t steps, uint8_t speed );
  • multisteppertb62261_set_direction This function sets the motor direction to clockwise or counter-clockwise in ctx->direction.
void multisteppertb62261_set_direction ( multisteppertb62261_t *ctx, uint8_t dir );

Example Description

This example demonstrates the use of the Multi Stepper TB62261 click board by driving the motor in both directions for a desired number of steps.

The demo application is composed of two sections :

Application Init

Initializes the driver and performs the click default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;  /**< Logger config object. */
    multisteppertb62261_cfg_t multisteppertb62261_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    multisteppertb62261_cfg_setup( &multisteppertb62261_cfg );
    MULTISTEPPERTB62261_MAP_MIKROBUS( multisteppertb62261_cfg, MIKROBUS_1 );
    if ( I2C_MASTER_ERROR == multisteppertb62261_init( &multisteppertb62261, &multisteppertb62261_cfg ) ) 
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( MULTISTEPPERTB62261_ERROR == multisteppertb62261_default_cfg ( &multisteppertb62261 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
    
    log_info( &logger, " Application Task " );
}

Application Task

Drives the motor clockwise for 200 steps and then counter-clockiwse for 100 steps with 2 seconds delay before changing the direction. Each step will be logged on the USB UART where you can track the program flow.

void application_task ( void )
{
    multisteppertb62261_set_direction ( &multisteppertb62261, MULTISTEPPERTB62261_DIR_CW );
    if ( MULTISTEPPERTB62261_OK == multisteppertb62261_drive_motor ( &multisteppertb62261, 200, 
                                                                     MULTISTEPPERTB62261_SPEED_FAST ) )
    {
        log_printf ( &logger, " Move 200 steps clockwise \r\n\n" );
        Delay_ms ( 1000 );
        Delay_ms ( 1000 );
    }
    
    multisteppertb62261_set_direction ( &multisteppertb62261, MULTISTEPPERTB62261_DIR_CCW );
    if ( MULTISTEPPERTB62261_OK == multisteppertb62261_drive_motor ( &multisteppertb62261, 100,
                                                                     MULTISTEPPERTB62261_SPEED_FAST ) )
    {
        log_printf ( &logger, " Move 100 steps counter-clockwise \r\n\n" );
        Delay_ms ( 1000 );
        Delay_ms ( 1000 );
    }
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.MultiStepperTB62261

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.