gyro4

\mainpage Main Page

---

Gyro 4 click

Gyro 4 Click is a two-axis MEMS gyroscope for optical image stabilization applications.

click Product page

---

Click library

• Author : MikroE Team
• Date : Dec 2019.
• Type : SPI type

Software Support

We provide a library for the Gyro4 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Gyro4 Click driver.

Standard key functions :

• Config Object Initialization function.

void gyro4_cfg_setup ( gyro4_cfg_t *cfg );

• Initialization function.

GYRO4_RETVAL gyro4_init ( gyro4_t *ctx, gyro4_cfg_t *cfg );

• Click Default Configuration function.

void gyro4_default_cfg ( gyro4_t *ctx );

Example key functions :

• Getting register content

uint8_t gyro4_spi_get ( gyro4_t *ctx, uint8_t register_address, uint8_t * register_buffer, uint16_t n_registers );

• Getting die temperature value

uint8_t gyro4_get_temperature ( gyro4_t *ctx, float * temperature );

• Getting axes values

uint8_t gyro4_get_axes( gyro4_t *ctx, float * x_axis, float * y_axis );

Examples Description

This application is a two-axis MEMS gyroscope for optical image stabilization.

The demo application is composed of two sections :

Application Init

Initializes SPI device

void application_init ( void )
{
    log_cfg_t log_cfg;
    gyro4_cfg_t cfg;
    uint8_t initialize_flag;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    gyro4_cfg_setup( &cfg );
    GYRO4_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    gyro4_init( &gyro4, &cfg );

    Delay_ms ( 500 );
    initialize_flag = gyro4_initialize( &gyro4 );
    if ( initialize_flag == 1 )
    {
        log_printf( &logger, "> App init fail \r\n" );
    }
    else if ( initialize_flag == 0 )
    {
        log_printf( &logger, "> App init done \r\n" );
    }
}
  

Application Task

Checks for data ready interrupt, gets axes and temperature data and logs those values

void application_task ( )
{
    uint8_t int_flag;
    float x_axis;
    float y_axis;
    float die_temperature;
    char degrees_celsius[ 4 ] = { ' ', 176, 'C', 0x00 };
    char degrees_per_second[ 5 ] = { ' ', 176, '/', 's', 0x00 };

    int_flag = gyro4_int_get( &gyro4 );
    while ( int_flag == 1 )
    {
        int_flag = gyro4_int_get( &gyro4 );
    }
    
    gyro4_get_temperature( &gyro4, &die_temperature );
    gyro4_get_axes( &gyro4, &x_axis, &y_axis );

    log_printf( &logger, "\r\n" );
    log_printf( &logger, "> Die temperature : %.2f %c \r\n", die_temperature, degrees_celsius );
    log_printf( &logger, "> X axis : %.2f %c \r\n", x_axis, degrees_per_second );
    log_printf( &logger, "> Y axis : %.2f %c \r\n", y_axis, degrees_per_second );

    Delay_ms ( 500 );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Gyro4

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---