Skip to content

Latest commit

 

History

History
784 lines (541 loc) · 21.7 KB

readme.md

File metadata and controls

784 lines (541 loc) · 21.7 KB

Option 2: Manual guide

All following sections describe manual guide - if you use the automated scripts, then you don't need this information unless you face some issue, then this information is helpful to understand how things work and how to debug them.

General expectations

Unless specified otherwise all commands/scripts in the instructions should run as root. If you don't use root account then use sudo -i from your user to switch to root. Where other user is expected we provide note and su command.

The current working directory doesn't matter unless specified with cd.

The build system was designed to use 3 or more machines that's why some steps may seem a bit unusual. This guide merges everything to single host under single user to make it simpler and faster to get started. You may use another machine as build node for Jenkins (or multiple nodes), you may also use another machine for reprepro but here it's assumed everything is one host under one user.

Before you install Jenkins, create its user and group

Most of Jenkinfiles do respect your UID/GID but not all, for example linux-kernel/Jenkinsfile has hardcoded UID and GID to 1006 and this will fail build if you don't have 1006:1006 user.

That's why we want to create jenkins user and group with ID 1006 before installing Jenkins from apt.

groupadd --system --gid 1006 jenkins
useradd --system --comment Jenkins --shell /bin/bash --uid 1006 --gid 1006 --home-dir /var/lib/jenkins jenkins

If you have already existing user then please change its UID/GID.

Install Jenkins, and its java

Install java, then Jenkins. Let setup guide to install recommended plugins.

Just follow the usual guide via APT https://www.jenkins.io/doc/book/installing/linux/#debianubuntu

Install docker

Just follow the usual guide via APT https://docs.docker.com/engine/install/debian/

Allow Jenkins to use docker:

usermod -a -G docker jenkins

Setup local IP

This guide will simplify the unknown by using static IP on dummy interface, this is hopefully outside your subnet if not please change all references of this IP with your own.

cat << EOT >> /etc/network/interfaces

auto dummy0
iface dummy0 inet static
    address 172.17.17.17/32
    pre-up ip link add dummy0 type dummy
EOT
ifup dummy0

Now we can locally point to known IP 172.17.17.17 as it was the host itself.

After adding docker group and/or after UID/GID change restart Jenkins

systemctl restart jenkins.service

Launch local registry and set it, so it always runs when Docker runs

docker run -d -p 5000:5000 --restart always --name registry registry:2.7

Allow insecure docker access to local registry:

Add your local IP with 5000 port to insecure-registries section in /etc/docker/daemon.json, something like this:

cat << EOF > /etc/docker/daemon.json
{
   "insecure-registries": [
      "172.17.17.17:5000"
   ]
}
EOF

Then restart docker:

systemctl restart docker.service

Install apt-cacher-ng for ELTS mirror

This is currently used only by equuleus.

apt install apt-cacher-ng

This will allow us to use http://172.17.17.17:3142/deb.freexian.com/extended-lts as ELTS mirror.

Build patched vyos-build docker images

The vyos/vyos-build docker image from dockerhub doesn't work for all packages as of now, thus we made some patches to make it work. If this changed in future then this step can be skipped.

The below script clones the (patched) vyos-build, then builds and pushes the images to your custom Docker repository.

#!/usr/bin/env bash
set -e

CUSTOM_DOCKER_REPO="172.17.17.17:5000"
ELTS_MIRROR="http://172.17.17.17:3142/deb.freexian.com/extended-lts"

#
# Clone (patched) vyos-build

git clone https://github.com/dd010101/vyos-build.git
cd vyos-build/docker

#
# Build and Push equuleus

git checkout equuleus
docker build --build-arg "ELTS_MIRROR=$ELTS_MIRROR" \
    --no-cache -t vyos/vyos-build:equuleus .

docker tag vyos/vyos-build:equuleus ${CUSTOM_DOCKER_REPO}/vyos/vyos-build:equuleus
docker push ${CUSTOM_DOCKER_REPO}/vyos/vyos-build:equuleus

#
# Build and Push sagitta

git checkout sagitta
docker build --no-cache -t vyos/vyos-build:sagitta .

docker tag vyos/vyos-build:sagitta ${CUSTOM_DOCKER_REPO}/vyos/vyos-build:sagitta
docker push ${CUSTOM_DOCKER_REPO}/vyos/vyos-build:sagitta

#
# Build and Push current -- (current is required for some sagitta packages)

git checkout current
docker build --no-cache -t vyos/vyos-build:current .

docker tag vyos/vyos-build:current ${CUSTOM_DOCKER_REPO}/vyos/vyos-build:current
docker push ${CUSTOM_DOCKER_REPO}/vyos/vyos-build:current

Install Jenkins plugins

Manage Jenkins -> Plugins -> Available plugins

  • Docker
  • Docker Pipeline
  • Copy Artifact
  • SSH Agent
  • Pipeline Utility Steps
  • Job DSL

Configure Built-In node

Manage Jenkins -> Nodes -> Built-In Node

Add labels (tags)

  • Docker
  • docker
  • ec2_amd64

Separated by space thus "Docker docker ec2_amd64" as result

Configure Jenkins System

Manage Jenkins -> System

Global properties -> Environmental Variables -> Add

Name: DEV_PACKAGES_VYOS_NET_HOST
Value: [email protected]

This user+IP/host will be used for SSH access to reprepro, it can be another host, we use the host itself, this IP needs to be accessible from docker container thus this should be LAN IP not localhost.

Global properties -> Environmental Variables -> Add

Name: ARM64_BUILD_DISABLED
Value: true

This is used to disable ARM64 support. The vyos-build expects that you have ARM64 build node and that's not something that is easy to obtain or emulate on x86. If you have ARM64 build node then skip this step and make sure your ARM64 node has tag ec2_arm64. If you try to build ARM64 without ARM node then most sagitta builds will wait and eventually fail.

Global properties -> Environmental Variables -> Add

Name: CUSTOM_BUILD_CHECK_DISABLED
Value: true

This is used to disable custom build check. Custom build check would normally skip upload to reprepro repository if package is built from non-vyos repository. Unfortunately currently it's impossible to build all packages from VyOS repositories, and thus we need to use custom repositories. Because some packages don't have functional build scripts or don't exist at all. This check doesn't make sense anyway since we are using our reprepro repository.

Global properties -> Environmental Variables -> Add

Name: CUSTOM_DOCKER_REPO
Value: 172.17.17.17:5000

This variable is used to specify local docker registry for automatic vyos-build docker image rebuild.

Global Pipeline Libraries -> Add

Name: vyos-build
Project repository: https://github.com/dd010101/vyos-build.git

Currently patched version of vyos-build is required, in the future the official https://github.com/vyos/vyos-build.git may work but doesn't currently.

Note for developers: equuleus is using only equuleus branch of vyos-build but sagitta is using both sagitta and current, thus if you fix something aimed at sagitta, you need to backports these changes to current as well, since some packages will use current and some sagitta branch.

Declarative Pipeline (Docker)

Docker registry URL: http://172.17.17.17:5000

This is required to tell Jenkins to use your own (patched) vyos-build docker image and not the DockerHub version.

Credentials for ssh-agent

You need to set up SSH key authentication for the host specified in DEV_PACKAGES_VYOS_NET_HOST variable. Basically we want to allow Jenkins to SSH into itself with its own SSH key.

Login as target user:

su - jenkins

Generate regular SSH key:

ssh-keygen -t ed25519 -C "jenkins"

Update authenticated_keys to allow Jenkins to log in to itself, something like this:

cat ~/.ssh/id_ed25519.pub >> ~/.ssh/authorized_keys

Accept signature and verify SSH works:

ssh 172.17.17.17

Then you can add this private key to Jenkins:

Manage Jenkins -> Credentials -> System -> Global credentials (unrestricted) -> Add Credentials

Kind: SSH Username with private key
ID: SSH-dev.packages.vyos.net
Username: jenkins

Private Key -> Enter directly -> Add

<paste private key of the generated ssh key like the contents of cat ~/.ssh/id_ed25519>

Preparation for reprepro SSH host

Install some packages:

apt install reprepro gpg

Generate GPG singing key (without passphrase):

sudo -u jenkins gpg --pinentry-mode loopback --full-gen-key

This key needs to be without passphrase. The reprepro uses this key in background thus there is no way to enter passphrase.

Remember your pub key, it's random string like "934824D5C6A72DA964B3AFBD27A7E25D86BB7E2A".

Create expected folder structure, prepare reprepro config and give Jenkins access, this is done for each release codename.

Set SIGN_PUB_KEY:

export SIGN_PUB_KEY="<pub key idenitifier from step above>"

Set RELEASE name:

export RELEASE=equuleus

or

export RELEASE=sagitta

Then create reprepro repository for each RELEASE:

export REPOSITORY=/home/sentrium/web/dev.packages.vyos.net/public_html/repositories/$RELEASE
mkdir -p $REPOSITORY
mkdir $REPOSITORY/conf

cat << EOF > $REPOSITORY/conf/distributions
Origin: $RELEASE
Label: $RELEASE
Codename: $RELEASE
Architectures: source amd64
Components: main
Description: $RELEASE
SignWith: $SIGN_PUB_KEY
EOF

cat << EOF > $REPOSITORY/conf/options
verbose
EOF

chown -R jenkins:jenkins /home/sentrium

uncron

This is required addition for the reprepro.

Install dependencies

apt install opam ocaml socat

Login as reprepro user and build uncon, then exit (if asked - confirm defaults)

You may have default opem switch already, then you will see [ERROR] There already is an installed switch named default - if you do then ignore this message and continue.

su - jenkins

git clone https://github.com/vyos/uncron.git
cd uncron

opam init
opam switch create default 4.13.1
eval $(opam env --switch=default)
opam install lwt lwt_ppx logs containers
eval $(opam env)

dune build
exit

Setup uncron service

cp /var/lib/jenkins/uncron/_build/install/default/bin/uncron /usr/local/sbin/

cat <<'EHLO' > /etc/systemd/system/uncron.service
[Unit]
Description=Command Queue Service
After=auditd.service systemd-user-sessions.service time-sync.target

[Service]
EnvironmentFile=/etc/uncron.conf
ExecStart=/usr/local/sbin/uncron
ExecReload=/bin/kill -HUP $MAINPID
KillMode=process
User=jenkins
Group=jenkins
Restart=on-failure
RestartSec=5s

[Install]
WantedBy=multi-user.target
EHLO

touch /etc/uncron.conf

systemctl daemon-reload
systemctl enable --now uncron.service

chmod +x /var/lib/jenkins/uncron/src/uncron-add

Create uncron-add script

We also use this as hack to fix some of VyOS packaging issues.

cat << 'EOF' > /usr/local/bin/uncron-add
#!/usr/bin/env bash
set -e

COMMAND="$1"

# this is hack to workaround a issue where vyos didn't create sagitta branch
# like the case of vyos-xe-guest-utilities, thus we need to build current
# branch and then redirect from here to sagitta repository
if [ ! -L ~/VyOS/current ]; then
    rm -rf ~/VyOS/current
    mkdir -p ~/VyOS/sagitta
    ln -s ~/VyOS/sagitta ~/VyOS/current
fi
if [[ "$COMMAND" == *"repositories/current"* ]]; then
    COMMAND=${COMMAND//current/sagitta}
fi
if [[ "$COMMAND" == *"vyos-xe-guest-utilities"* ]] && [[ "$COMMAND" == *"current"* ]]; then
    COMMAND=${COMMAND//current/sagitta}
fi

/var/lib/jenkins/uncron/src/uncron-add "$COMMAND"
EOF

chmod +x /usr/local/bin/uncron-add

Multibranch Pipelines (by script)

Script exists to automate pipeline/job creation.

Generate Jenkins API token:

User account (click on your username - top-right corner) -> Configure
API Token -> Current token(s) -> Add new Token

Name: CLI
-> [Generate] -> [copy generated key and save it for later use]

Get the script

git clone https://github.com/dd010101/vyos-jenkins.git
cd vyos-jenkins/manual

Install dependencies

apt install -y xmlstarlet jq

Adjust settings to suit your Jenkins

export JENKINS_USER=<your-username>
export JENKINS_TOKEN=<your-token>

If you want to build only specific branch

Configure BRANCH environment variable to desired branch before you run the script. Not defined or empty value means all branches (the default).

export BRANCH="sagitta"

Create jobs

Then wait for branch indexing to complete.

./seed-jobs.sh create

After branch indexing you can trigger build for everything

Make sure you have >=16GB RAM or 8GB RAM + 8GB swap, since running build for everything like this eats more memory than building one by one this is also dependent on how many Number of executors you have.

./seed-jobs.sh build

Now wait for build to complete and check Build History and Dashboard for failed builds. If you find any failed builds then read Console Output to see why it did failed.

This process is required only once. After you create Jenkins jobs, and you do first build then Jenkins will periodically check if GIT repository for job changed and will do automatically build given job/packages.

You can also create Multibranch Pipelines manually, see bellow.

Mirror preparation

Use the default procedure to build ISO (via docker) but you need to specify your --vyos-mirror and your gpg singing key --custom-apt-key.

To make --vyos-mirror is easy, you just install your favorite webserver and point the webroot to /home/sentrium/web/dev.packages.vyos.net/public_html/repositories/. For example nginx vhost looks something like this:

server {
	listen 80;
	listen [::]:80;

	root /home/sentrium/web/dev.packages.vyos.net/public_html/repositories;
	autoindex on;

	server_name _;

	location / {
		try_files $uri $uri/ =404;
	}

	location ~ /(.*)/conf {
		deny all;
	}

	location ~ /(.*)/db {
		deny all;
	}
}

This will give you HTTP APT repository, like this http://172.17.17.17/equuleus.

To create --custom-apt-key you need to export your gpg singing public key, for example:

sudo -u jenkins gpg --armor --output /home/sentrium/web/dev.packages.vyos.net/public_html/repositories/apt.gpg.key \
  --export-options export-minimal --export vyos

This will give you /home/sentrium/web/dev.packages.vyos.net/public_html/repositories/apt.gpg.key or http://172.17.17.17/apt.gpg.key.

If you have the --vyos-mirror URL of your own repository and your own singing key --custom-apt-key then you can use these two pieces to build ISO from your own package mirror.

How to build ISO

Complete instructions to illustrate how to build ISO via Docker method included with the extra options outline above.

We assume you already have Docker running if not follow the official instructions for your OS.

Obtain the sources:

git clone https://github.com/dd010101/vyos-build
cd vyos-build

Select branch of your choice

For all following steps will use BRANCH environment variable since the branch repeats a lot.

export BRANCH=equuleus

or

export BRANCH=sagitta

Switch to branch

git checkout "$BRANCH"

Clear previous build resources (if any)

There is make clean but that doesn't always clean everything and may produce corrupted build environment. The make clean is trying to remove specific parts of build directory, but it doesn't always do so correctly. This happens mainly if you switch branches - that's why it's better to always delete the whole build directory.

rm -rf build/

Obtain vyos-build docker container

You can reuse your docker container image if you already have custom registry with patched vyos-build docker container.

Change the registry URL if you build on other machine.

docker pull "172.17.17.17:5000/vyos/vyos-build:$BRANCH"
docker tag "172.17.17.17:5000/vyos/vyos-build:$BRANCH" "vyos/vyos-build:$BRANCH"

If you don't have custom registry then build the container - this will take a while:

docker build -t "vyos/vyos-build:$BRANCH" docker

You should rebuild the container from time to time - not very frequently but sometimes the build will break if you have too old container.

Obtain apt singing key for your custom mirror

wget http://172.17.17.17/apt.gpg.key -O /tmp/apt.gpg.key

Launch the vyos-build docker container

This is the usual run command from official documentation, we need to add extra mount for our apt singing key for later use via -v "/tmp/apt.gpg.key:/opt/apt.gpg.key".

The docker run command will mount current working directory for use inside the container that's why you need to execute this command inside the vyos-build directory (that is the GIT repository you cloned above). You can also replace the -v "$(pwd)":/vyos with static path if you like not to depend on current directory (for example -v /opt/vyos-build:/vyos).

docker run --rm -it \
    -v "$(pwd)":/vyos \
    -v "/tmp/apt.gpg.key:/opt/apt.gpg.key" \
    -w /vyos --privileged --sysctl net.ipv6.conf.lo.disable_ipv6=0 \
    -e GOSU_UID=$(id -u) -e GOSU_GID=$(id -g) \
    "vyos/vyos-build:$BRANCH" bash

Now we should be inside the container.

Configure and build the ISO

Command for configuring changed over time, equuleus has ./configure, sagitta has ./build-vyos-image iso instead.

You may want to customize the configuration options, see what is available:

For equuleus:

sudo ./configure --help

For sagitta:

sudo ./build-vyos-image --help

We need to add extra two options to configure --vyos-mirror and --custom-apt-key. We also add smoketest via --custom-package vyos-1x-smoketest for good measure.

Here are examples - please adjust options to your liking:

For equuleus:

sudo ./configure --architecture amd64 --build-by "myself@localhost" \
   --build-type release --version "1.3.x" \
   --vyos-mirror http://172.17.17.17/equuleus --custom-apt-key /opt/apt.gpg.key \
   --debian-elts-mirror http://172.17.17.17:3142/deb.freexian.com/extended-lts \
   --custom-package vyos-1x-smoketest \
   && sudo make iso

For sagitta:

sudo ./build-vyos-image iso --architecture amd64 --build-by "myself@localhost" \
   --build-type release --version "1.4.x" \
   --vyos-mirror http://172.17.17.17/sagitta --custom-apt-key /opt/apt.gpg.key \
   --custom-package vyos-1x-smoketest

This will take a while - after all is done then you can exit the container and you should have build/live-image-amd64.hybrid.iso.

Multibranch Pipelines (manual)

Use + button on Jenkins dashboard to add Multibranch Pipeline. Each Jenkinsfile needs its own Multibranch Pipeline, the setup is the same for all packages, and you just adjust location of Jenkinsfile and/or GIT repository to whatever you want to build. See packages info bellow for list of all GIT repository and location their Jenkinsfile.

It makes sense to configure one pipeline and then use "Copy from" and just change the Jenkinsfile location and/or GIT repository. Start with something small like dropbear, and after you verify your setup works then try the bigger stuff like linux-kernel.

There are two types of configurations - first you have single shared GIT repository with many Jenkinsfile, like the https://github.com/vyos/vyos-build.git, thus each pipeline points to different Jenkinsfile, but they share same GIT url. Rest of the packages have their own GIT repository with single root Jenkinsfile, thus the Jenkinsfile stays "Jenkinsfile" and you change the GIT url only. The https://github.com/vyos/vyos-build.git repository has also its own root Jenkinsfile - ignore it since that one is trying to build ISO with default (blocked) apt mirror.

You can see all packages and information about them in the packages.md file.

Branch Sources -> Add source -> Git

Project Repository: https://github.com/vyos/vyos-build.git

(or any other repository, like https://github.com/vyos/vyos-1x.git)

You may want to restrict to only branches you care about, thus:

Behaviours -> Add -> Filter by name (with regular expression)

Regular expression:* (equuleus|sagitta)

Behaviours -> Add -> Advanced clone behaviours

Fetch tags: [✓]

(leave defaults)

Advanced clone is required for some packages to obtain all tags (specifically vyos-cloud-init and vyos-1x). It doesn't hurt to have advanced clone for everything, thus you can set-it and copy for everything without worrying about what to use it for.

Build Configuration -> Mode (by Jenkinsfile)

Script Path: packages/dropbear/Jenkinsfile

(if you want to build package from vyos/vyos-build repository)

Script Path: Jenkinsfile

(or leave just Jenkinsfile if you want to build repository like vyos/vyos-1x where there is just one package)

Scan Multibranch Pipeline Triggers

[✓] Periodically if not otherwise run

Interval: 1 hour

Jenkins will check the source GIT repository if changes were made and execute automatic build if needed. This will keep packages up to date.

Try to build

Now it's possible to select some Multibranch Pipeline, select your branch, and you can press build button to see what happens! If all is well you should see .deb appearing in /home/sentrium/web/dev.packages.vyos.net/public_html/repositories/:

find /home/sentrium/web/dev.packages.vyos.net/public_html/repositories/ -name '*.deb' -print

If build fails then click the specific build number and check Console Output for hints why it does so.