Skip to content

Latest commit

 

History

History
414 lines (331 loc) · 33 KB

mediasdk-tutorials-cmd-reference.md

File metadata and controls

414 lines (331 loc) · 33 KB




Tutorials Command Line Reference

LEGAL DISCLAIMER

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.

Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information.

The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800-548-4725, or by visiting Intel's Web Site.

MPEG is an international standard for video compression/decompression promoted by ISO. Implementations of MPEG CODECs, or MPEG enabled platforms may require licenses from various entities, including Intel Corporation.

Intel and the Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

*Other names and brands may be claimed as the property of others.

Copyright © 2007-2019, Intel Corporation. All Rights reserved.

Optimization Notice

Intel's compilers may or may not optimize to the same degree for non-Intel microprocessors for optimizations that are not unique to Intel microprocessors. These optimizations include SSE2, SSE3, and SSSE3 instruction sets and other optimizations. Intel does not guarantee the availability, functionality, or effectiveness of any optimization on microprocessors not manufactured by Intel.

Microprocessor-dependent optimizations in this product are intended for use with Intel microprocessors. Certain optimizations not specific to Intel microarchitecture are reserved for Intel microprocessors. Please refer to the applicable product User and Reference Guides for more information regarding the specific instruction sets covered by this notice.

Notice revision #20110804

Table of contents

General considerations

Intel Media SDK Tutorials package was designed in the simplistic manner. Each tutorial suites the purpose to demonstrate some technique of working with the Media SDK library. For the simplicity sample code supports only minimum required number of options without which it is impossible to variate input data and produce correct result. This command line reference is divided into few parts. Each part describes group of tutorials which have the same or similar list of command line options and arguments. The parts are:

  • Basic tutorials.
  • Decoding tutorials. The only configurable component in these tutorials is decoder (H.264). Configuration parameters are input and output streams.
  • Encoding tutorials. The only configurable component is encoder (H.264). Configuration parameters (besides input and output stream) - width, height, bitrate, framerate.
  • VPP tutorials. The only configurable component is VPP. Configuration parameters (besides input and output stream) - input stream width and height.
  • Transcoding tutorials. Configurable components are decoder (H.264) and encoder (H.264). Configuration parameters are: input/output streams, bitrate/framerate to encode.

Basic tutorials

simple_1_session

simple_1_session [-sw | -hw | -auto] Tutorial initializes Intel Media SDK session of a specified type. If -auto is specified (the default) Media SDK dispatcher will automatically select library implementation to use. If -hw is specified HW implementation will be used, -sw - SW one. Depending on Media SDK distribution different implementations may present. Options to adjust session type are applicable for all other tutorials described in this reference.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically choses Media SDK library implementation

simple_7_codec

simple_7_codec [-sw | -hw | -auto] Tutorial showcases MSDK features via call Query functions. The tutorial can be run with the -hw, -sw, -auto or no options, it will report the capability for each codec. Since this tutorial checks all supported coded, it will configure a set of the video parameters for each codec by the predefined filling function. Each filling function will try the maximum resolutions, user might change the resolution based on his platform.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically choses Media SDK library implementation

Decoding tutorials

simple_2_decode

simple_decode [-sw | -hw | -auto] input-file [ output-file ] Tutorial demonstrates how to decode given raw video stream (input-file) of H.264 format. If output-file was specified, decoded YUV will be written into it. If the output-file is omitted, tutorial can be used to estimate constructed pipeline’s performance. Decoder is configured to produce decoded data in the system memory.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically choses Media SDK library implementation
Argument Description
input-file Mandatory argument. Sets incoming input bitstream to process. Input data should be in raw H.264 format.
output-file Optional argument. Sets uncompressed video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output.

simple_2_decode_hevc10

simple_2_decode_hevc10 [-sw | -hw | -auto] input-file [ output-file ] Tutorial demonstrates how to decode given raw video stream (input-file) of H.265 format. If output-file is specified, decoded YUV will be written into it. If the output-file is omitted, tutorial can be used to estimate constructed pipeline’s performance. Decoder is configured to produce decoded data in the system memory.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically choses Media SDK library implementation
Argument Description
input-file Mandatory argument. Sets incoming input bitstream to process. Input data should be in raw H.265 format.
output-file Optional argument. Sets uncompressed video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output.

simple_2_decode_vmem

simple_decode_vmem [-sw | -hw | -auto] input-file [ output-file ] Tutorial demonstrates how to decode given raw video stream (input-file) of H.264 format. If output-file was specified, decoded YUV will be written into it. If the output-file is omitted, tutorial can be used to estimate constructed pipeline’s performance. Decoder is configured to produce decoded data in the video memory.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically choses Media SDK library implementation
Argument Description
input-file Mandatory argument. Sets incoming input bitstream to process. Input data should be in raw H.264 format.
output-file Optional argument. Sets uncompressed video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output.

simple_6_decode_vpp_postproc

simple_decode_vpp_pp [-sw | -hw | -auto] input-file [ output-file ] Tutorial demonstrates how to decode given raw video stream (input-file) of H.264 format and perform some operation with the decoded frames thru the Video Post-Processing (VPP) component. If output-file was specified, decoded YUV will be written into it. If the output-file is omitted, tutorial can be used to estimate constructed pipeline’s performance. The performed VPP operation is x2 downscaling.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically choses Media SDK library implementation
Argument Description
input-file Mandatory argument. Sets incoming input bitstream to process. Input data should be in raw H.264 format.
output-file Optional argument. Sets uncompressed video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output.

Encoding tutorials

simple_3_encode

simple_encode [-sw | -hw | -auto] -g WxH -b bitrate -f framerate [ input-file ] [ output-file ] Tutorial demonstrates how to encode given YUV video stream (input-file) in H.264 format. If output-file was specified, encoded bitstream will be written into it. If the input-file and output-file are omitted, tutorial can be used to estimate constructed pipeline’s performance (to some degree). Encoder is configured to receive input data from system memory.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically choses Media SDK library implementation
-g WxH Mandatory option. Sets input video geometry, i.e. width and height. Example: -g 1920x1080.
-b bitrate Mandatory option. Sets bitrate with which data should be encoded, in KBits-per-second. Example: -b 5000 to encode data at 5Mbit.
-f framerate Mandatory option. Sets framerate with which data should be encoded in the form -f nominator/denominator. Example: -f 30/1.
Argument Description
input-file Optional argument. Sets incoming input file containing uncompressed video. If file will not be specified, tutorial will work in the performance mode: input will be simulated by producing empty input frames filled with some color
output-file Optional argument. Sets raw H.264 video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output.

simple_3_encode_hevc10

simple_3_encode_hevc10 [-sw | -hw | -auto] -g WxH -b bitrate -f framerate [ input-file ] [ output-file ] Tutorial demonstrates how to encode given p010 YUV video stream (input-file) in H.265 format. If output-file is specified, encoded bitstream will be written into it. If the input-file and output-file are omitted, tutorial can be used to estimate constructed pipeline’s performance (to some degree). Encoder is configured to receive input data from system memory.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically choses Media SDK library implementation
-g WxH Mandatory option. Sets input video geometry, i.e. width and height. Example: -g 1920x1080.
-b bitrate Mandatory option. Sets bitrate with which data should be encoded, in KBits-per-second. Example: -b 5000 to encode data at 5Mbit.
-f framerate Mandatory option. Sets framerate with which data should be encoded in the form -f nominator/denominator. Example: -f 30/1.
Argument Description
input-file Optional argument. Sets incoming input file containing uncompressed video. If file is not be specified, tutorial will work in the performance mode: input will be simulated by producing empty input frames filled with some color
output-file Optional argument. Sets raw H.265 video file to write output data. If file is not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output.

simple_3_encode_vmem

simple_encode_vmem [-sw | -hw | -auto] -g WxHx10 -b bitrate -f framerate [ input-file ] [ output-file ] Tutorial demonstrates how to encode given YUV video stream (input-file) in H.264 format. If output-file was specified, encoded bitstream will be written into it. If the input-file and output-file are omitted, tutorial can be used to estimate constructed pipeline’s performance (to some degree). Encoder is configured to receive input data from video memory.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically choses Media SDK library implementation
-g WxHx10 Mandatory option. Sets input video geometry, i.e. width, height, bitdepth. Example: -g 1920x1080x10.
-b bitrate Mandatory option. Sets bitrate with which data should be encoded, in KBits-per-second. Example: -b 5000 to encode data at 5Mbit.
-f framerate Mandatory option. Sets framerate with which data should be encoded in the form -f nominator/denominator. Example: -f 30/1.
Argument Description
input-file Optional argument. Sets incoming input file containing uncompressed video. If file will not be specified, tutorial will work in the performance mode: input will be simulated by producing empty input frames filled with some color.
output-file Optional argument. Sets raw H.264 video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output.

simple_3_encode_vmem_async

simple_encode_vmem_async [-sw | -hw | -auto] -g WxH -b bitrate -f framerate [ input-file ] [ output-file ]

Tutorial demonstrates how to encode given YUV video stream (input-file) in H.264 format. If output-file was specified, encoded bitstream will be written into it. If the input-file and output-file are omitted, tutorial can be used to estimate constructed pipeline’s performance (to some degree). Encoder is configured to receive input data from system memory. Constructed pipeline is asynchronous and should be faster than pipelines in simple 3 encode and simple 3 encode vmem samples.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically choses Media SDK library implementation
-g WxH Mandatory option. Sets input video geometry, i.e. width and height. Example: -g 1920x1080.
-b bitrate Mandatory option. Sets bitrate with which data should be encoded, in KBits-per-second. Example: -b 5000 to encode data at 5Mbit.
-f framerate Mandatory option. Sets framerate with which data should be encoded in the form -f nominator/denominator. Example: -f 30/1.
Argument Description
input-file Optional argument. Sets incoming input file containing uncompressed video. If file will not be specified, tutorial will work in the performance mode: input will be simulated by producing empty input frames filled with some color.
output-file Optional argument. Sets raw H.264 video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output.

simple_6_encode_vmem_lowlatency

simple_encode_vmem_lowlat [-sw | -hw | -auto] -g WxH -b bitrate -f framerate [–measure-latency | –no-measure-latency] [ input-file ] [ output-file ]

Tutorial demonstrates how to encode given YUV video stream (input-file) in H.264 format. If output-file was specified, encoded bitstream will be written into it. If the input-file and output-file are omitted, tutorial can be used to estimate constructed pipeline’s performance (to some degree). Encoder is configured to work in low latency mode, producing encoded data as fast as possible.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically choses Media SDK library implementation
-g WxH Mandatory option. Sets input video geometry, i.e. width and height. Example: -g 1920x1080.
-b bitrate Mandatory option. Sets bitrate with which data should be encoded, in KBits-per-second. Example: -b 5000 to encode data at 5Mbit.
-f framerate Mandatory option. Sets framerate with which data should be encoded in the form -f nominator/denominator. Example: -f 30/1.
--measure-latency Optional argument. With the option set tutorial calculates and prints latency statistics. This is the default.
--no-measure-latency Optional argument. With the option set tutorial will not calculate and print latency statistics.
Argument Description
input-file Optional argument. Sets incoming input file containing uncompressed video. If file will not be specified, tutorial will work in the performance mode: input will be simulated by producing empty input frames filled with some color.
output-file Optional argument. Sets raw H.264 video file to write output data. If file will not be specified, tutorial will work in the perfromance mode: it will process data, but will not produce any output.

simple_6_encode_vmem vpp preproc

simple_encode_vmem_preproc [-sw | -hw | -auto] -g WxH -b bitrate -f framerate [ input-file ] [ output-file ]

Tutorial demonstrates how to encode given RGB video stream (input-file) in H.264 format after applying some Video Pre-Processing (VPP) operation. If output-file was specified, encoded bitstream will be written into it. If the input-file and output-file are omitted, tutorial can be used to estimate constructed pipeline’s performance (to some degree). The performed VPP operation is RGB to NV12 color space conversion.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically choses Media SDK library implementation
-g WxH Mandatory option. Sets input video geometry, i.e. width and height. Example: -g 1920x1080.
-b bitrate Mandatory option. Sets bitrate with which data should be encoded, in KBits-per-second. Example: -b 5000 to encode data at 5Mbit.
-f framerate Mandatory option. Sets framerate with which data should be encoded in the form -f nominator/denominator. Example: -f 30/1.
Argument Description
input-file Optional argument. Sets incoming input file containing uncompressed video. If file will not be specified, tutorial will work in the performance mode: input will be simulated by producing empty input frames filled with some color.
output-file Optional argument. Sets raw H.264 video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output.

Video PreProcessing (VPP) tutorials

simple_4_vpp_resize_denoise

simple_vpp [-sw | -hw | -auto] -g WxH [ input-file ] [ output-file ] Tutorial demonstrates how to run some Video Pre/Post-Processing (VPP) operation in the given input YUV stream (input-file). If output-file was specified, produced stream will be written into it. If the input-file and output-file are omitted, tutorial can be used to estimate constructed pipeline’s performance. Constructed pipeline is configured to work on system memory on the input and output. The performed VPP operation is x2 downscaling and noise reduction.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically chooses Media SDK library implementation
-g WxH Mandatory option. Sets input video geometry, i.e. width and height. Example: -g 1920x1080.
Argument Description
input-file Optional argument. Sets incoming input file containing uncompressed video. If file will not be specified, tutorial will work in the performance mode: input will be simulated by producing empty input frames filled with some color.
output-file Optional argument. Sets uncompressed video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output.

simple_4_vpp_resize_denoise_vmem

simple_vpp_vmem [-sw | -hw | -auto] -g WxH [ input-file ] [ output-file ] Tutorial demonstrates how to run some Video Pre/Post-Processing (VPP) operation in the given input YUV stream (input-file). If output-file was specified, produced stream will be written into it. If the input-file and output-file are omitted, tutorial can be used to estimate constructed pipeline’s performance. Constructed pipeline is configured to work on video memory on the input and output. The performed VPP operation is x2 downscaling and noise reduction.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically chooses Media SDK library implementation
-g WxH Mandatory option. Sets input video geometry, i.e. width and height. Example: -g 1920x1080.
Argument Description
input-file Optional argument. Sets incoming input file containing uncompressed video. If file will not be specified, tutorial will work in the performance mode: input will be simulated by producing empty input frames filled with some color.
output-file Optional argument. Sets uncompressed video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output.

Transcoding tutorials

simple_5_transcode

simple_transcode [-sw | -hw | -auto] -b bitrate -f framerate input-file [ output-file ] [Command] Tutorial demonstrates how to transcode given input raw H.264 video stream (input-file) into H.264 stream with different parameters. If output-file was specified, produced stream will be written into it. If output-file is omitted, tutorial can be used to estimate constructed pipeline’s performance. Constructed pipeline is configured to share system memory between decoder and encoder.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically chooses Media SDK library implementation
-b bitrate Mandatory option. Sets bitrate with which data should be encoded, in KBits-per-second. Example: -b 5000 to encode data at 5Mbit.
-f framerate Mandatory option. Sets framerate with which data should be encoded in the form -f nominator/denominator. Example: -f 30/1.
Argument Description
input-file Mandatory argument. Sets incoming input bitstream to process. Input data should be in raw H.264 format.
output-file Optional argument. Sets raw H.264 video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output

simple_5_transcode_vmem

simple_transcode_vmem [-sw | -hw | -auto] -b bitrate -f framerate input-file [ output-file ] Tutorial demonstrates how to transcode given input raw H.264 video stream (input-file) into H.264 stream with different parameters. If output-file was specified, produced stream will be written into it. If output-file is omitted, tutorial can be used to estimate constructed pipeline’s performance. Constructed pipeline is configured to share video memory between decoder and encoder.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically chooses Media SDK library implementation
-b bitrate Mandatory option. Sets bitrate with which data should be encoded, in KBits-per-second. Example: -b 5000 to encode data at 5Mbit.
-f framerate Mandatory option. Sets framerate with which data should be encoded in the form -f nominator/denominator. Example: -f 30/1.
Argument Description
input-file Mandatory argument. Sets incoming input bitstream to process. Input data should be in raw H.264 format.
output-file Optional argument. Sets raw H.264 video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output

simple_5_transcode_opaque

simple_transcode_opaque [-sw | -hw | -auto] -b bitrate -f framerate input-file [ output-file ] Tutorial demonstrates how to transcode given input raw H.264 video stream (input-file) into H.264 stream with different parameters. If output-file was specified, produced stream will be written into it. If output-file is omitted, tutorial can be used to estimate constructed pipeline’s performance. Constructed pipeline is configured to share opaque memory between decoder and encoder.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically chooses Media SDK library implementation
-b bitrate Mandatory option. Sets bitrate with which data should be encoded, in KBits-per-second. Example: -b 5000 to encode data at 5Mbit.
-f framerate Mandatory option. Sets framerate with which data should be encoded in the form -f nominator/denominator. Example: -f 30/1.
Argument Description
input-file Mandatory argument. Sets incoming input bitstream to process. Input data should be in raw H.264 format.
output-file Optional argument. Sets raw H.264 video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output

simple_5_transcode_opaque_async

simple_transcode_opaque_async [-sw | -hw | -auto] -b bitrate -f framerate input-file [ output-file ] Tutorial demonstrates how to transcode given input raw H.264 video stream (input-file) into H.264 stream with different parameters. If output-file was specified, produced stream will be written into it. If output-file is omitted, tutorial can be used to estimate constructed pipeline’s performance. Constructed pipeline is configured to share opaque memory between decoder and encoder and work in the asynchronous mode.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically chooses Media SDK library implementation
-b bitrate Mandatory option. Sets bitrate with which data should be encoded, in KBits-per-second. Example: -b 5000 to encode data at 5Mbit.
-f framerate Mandatory option. Sets framerate with which data should be encoded in the form -f nominator/denominator. Example: -f 30/1.
Argument Description
input-file Mandatory argument. Sets incoming input bitstream to process. Input data should be in raw H.264 format.
output-file Optional argument. Sets raw H.264 video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output

simple_6_transcode_opaque_lowlatency

simple_transcode_opaque_lowlat [-sw | -hw | -auto] -b bitrate -f framerate input-file [ output-file ] Tutorial demonstrates how to transcode given input raw H.264 video stream (input-file) into H.264 stream with different parameters. If output-file was specified, produced stream will be written into it. If output-file is omitted, tutorial can be used to estimate constructed pipeline’s performance. Constructed pipeline is configured to share opaque memory between decoder and encoder and work in the low latency mode, i.e. produce output as fast as possible.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically chooses Media SDK library implementation
-b bitrate Mandatory option. Sets bitrate with which data should be encoded, in KBits-per-second. Example: -b 5000 to encode data at 5Mbit.
-f framerate Mandatory option. Sets framerate with which data should be encoded in the form -f nominator/denominator. Example: -f 30/1.
Argument Description
input-file Mandatory argument. Sets incoming input bitstream to process. Input data should be in raw H.264 format.
output-file Optional argument. Sets raw H.264 video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output

simple_5_transcode_opaque_async_vppresize

simple_transcode_opaque_async_vppresize [-sw | -hw | -auto] -b bitrate -f framerate input-file [ output-file ] Tutorial demonstrates how to transcode given input raw H.264 video stream (input-file) into H.264 stream with different parameters. This tutorial adds VPP processing (x4 down-scaling) in the pipeline. If output-file was specified, produced stream will be written into it. If output-file is omitted, tutorial can be used to estimate constructed pipeline’s performance. Constructed pipeline is configured to share opaque memory between decoder and encoder and work in the asynchronous mode.

Option Description
-sw Loads SW Media SDK Library implementation
-hw Loads HW Media SDK Library implementation
-auto Automatically chooses Media SDK library implementation
-b bitrate Mandatory option. Sets bitrate with which data should be encoded, in KBits-per-second. Example: -b 5000 to encode data at 5Mbit.
-f framerate Mandatory option. Sets framerate with which data should be encoded in the form -f nominator/denominator. Example: -f 30/1.
Argument Description
input-file Mandatory argument. Sets incoming input bitstream to process. Input data should be in raw H.264 format.
output-file Optional argument. Sets raw H.264 video file to write output data. If file will not be specified, tutorial will work in the performance mode: it will process data, but will not produce any output