You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
This repository has been archived by the owner on Sep 4, 2024. It is now read-only.
Hi guys - in the v3 files, the .stl for the LED ring I'm having issues getting a clean print on the Prusa i3 MK2/S printer. What I witness is a bridge strand is looped around the inner brackets and then the printer attempts to fill from edge-to-bridge. It's never worked cleanly, sometimes only filling about half-way to the bridge. As the loose strands curl, harden and lift then it interferes with the next layers (14+) and then breaks many other existing parts.
One option I'm trying is to cut/split the entire ledring model at layer 14 - printing them separately and then using some glue to put them back into place.
Any advice on the slice settings?
-mt
The text was updated successfully, but these errors were encountered:
Sign up for freeto subscribe to this conversation on GitHub.
Already have an account?
Sign in.
Hi guys - in the v3 files, the .stl for the LED ring I'm having issues getting a clean print on the Prusa i3 MK2/S printer. What I witness is a bridge strand is looped around the inner brackets and then the printer attempts to fill from edge-to-bridge. It's never worked cleanly, sometimes only filling about half-way to the bridge. As the loose strands curl, harden and lift then it interferes with the next layers (14+) and then breaks many other existing parts.
One option I'm trying is to cut/split the entire ledring model at layer 14 - printing them separately and then using some glue to put them back into place.
Any advice on the slice settings?
-mt
The text was updated successfully, but these errors were encountered: